text stringlengths 78 3.17k |
|---|
<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_5_LOW_TX_POWER_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK Tx power less than or equal to the low Tx power warning threshold. The CPAK is the pluggable optics on the line cards. The Tx power thre... |
<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_ALIGN_ERROR_LANE_INDICATE_10_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_ALIGN_ERROR_LANE_INDICATE_10 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 're... |
<｜begin▁of▁sentence｜>
### Instruction:
MKA-3-TX_INSTALL_FAILURE
### Response:
(Severity: 3), (Category: L2), (Description: TxSA/TxSC programming has failed. As recovery, session would be bought down on this interface, followed by session bringup. Traffic hit expected.), (Recommended Action: contact cisco-support by sha... |
<｜begin▁of▁sentence｜>
### Instruction:
INSTHELPER-6-ISSU_GO_ACTIVE
### Response:
(Severity: 6), (Category: INSTALL), (Description: During ISSU operation node received node role change notification .Node will change to active.), (Recommended Action: Copy the error message exactly as it appears on the console or in the s... |
<｜begin▁of▁sentence｜>
### Instruction:
How can you monitor EEM reliability metrics in Cisco IOS XR?
### Response:
EEM reliability metrics in Cisco IOS XR can be monitored using the 'show event manager metric' command. This command displays information about the EEM system, including policy execution counts, success rat... |
<｜begin▁of▁sentence｜>
### Instruction:
HA_WD-6-MEMORY_RECOVERY_KILL_NON_PROCESSMGR
### Response:
(Severity: 6), (Category: HA), (Description: The process with the indicated name and pid has been killed in an attempt to recover system memory. Since this process is not managed by processmgr, it may not be restarted. The ... |
<｜begin▁of▁sentence｜>
### Instruction:
OPTICS-3-BAD_FPGA_IMAGE
### Response:
(Severity: 3), (Category: L2), (Description: The indicated FPGA image in SPI flash does not appear to have a valid meta-data. This means that a previous FPD upgrade operation did not finish the programming operation of the image.), (Recommende... |
<｜begin▁of▁sentence｜>
### Instruction:
FEA_DLL-3-TCAM_ERR
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: Feature EA DLL encountered error in completing TCAM operation. This can lead to mismatch between hardware and software configuration.), (Recommended Action: The most common cause of this error is ... |
<｜begin▁of▁sentence｜>
### Instruction:
MRIB-3-NSFSTATE
### Response:
(Severity: 3), (Category: ROUTING), (Description: An internal error occurred when MRIB attempted to transition to/from Non-stop Forwarding mode.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, c... |
<｜begin▁of▁sentence｜>
### Instruction:
CE_TFTP-3-ERR
### Response:
(Severity: 3), (Category: IP), (Description: The CE-TFTP server process exitted due to some reason.), (Recommended Action: The system will try again. No action is required.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
QSFP_PLUS-3-LANE_0_HIGH_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a QSFP+ laser temperature greater than or equal to the high temperature warning threshold. The QSFP+ is the pluggable optics on the line card... |
<｜begin▁of▁sentence｜>
### Instruction:
CHKPT_PROXY-7-PUTENV
### Response:
(Severity: 7), (Category: HA), (Description: The proxy process uses putenv() to communicate with the checkpoint library. A call to putenv() failed with the specified error.), (Recommended Action: No action is required.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
What is a composite bootable file in IOS XR?
### Response:
A composite bootable file (e.g., comp-hfr-mini.vm-3.6.0) is a single file that contains all the packages needed to boot a router and provide full routing functionality. It includes the base OS, routing protocols, forwardin... |
<｜begin▁of▁sentence｜>
### Instruction:
MPLS_LCAC-7-ERR_INTERNAL
### Response:
(Severity: 7), (Category: ROUTING), (Description: An internal system error occured.), (Recommended Action: Copy the message exactly as it appears and report it to your technical service representative.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_2_HIGH_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature greater than or equal to the high temperature warning threshold. The CFP is the pluggable optics on the line cards. The tem... |
<｜begin▁of▁sentence｜>
### Instruction:
ISIS-4-DUPLICATE_MT_CAPABILITY
### Response:
(Severity: 4), (Category: ROUTING), (Description: The specified LSP contains multiple items advertising the same MT capability. This is an indication that the router which owns the LSP has generated its LSP incorrectly. If the MT capabi... |
<｜begin▁of▁sentence｜>
### Instruction:
LDP-5-NBR_CHANGE
### Response:
(Severity: 5), (Category: ROUTING), (Description: A LDP neighbor has changed state (up/down). If neighbor has gone down, then a reason for session going down is also displayed. This message appears only if the <Bold>mpls ldp log neighbor<NoBold> comm... |
<｜begin▁of▁sentence｜>
### Instruction:
MPLS_VPN_MIB-3-ERR_TRACE_INIT
### Response:
(Severity: 3), (Category: OS), (Description: mpls vpn mib could not initialize the tracing module), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support ... |
<｜begin▁of▁sentence｜>
### Instruction:
SHELFMGRV2-3-FORCED_POWEROFF_FAILED
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Multiple attempts to force the powering off of the node have failed. No further attempts will be made, all boot request sent from this affected node will not be processed.), (Recom... |
<｜begin▁of▁sentence｜>
### Instruction:
FLOWTRAP-4-BAD_ACTOR_MAC_DETECTED
### Response:
(Severity: 4), (Category: OS), (Description: The punt flow trap sampler detected an excessive flow from a source MAC address. This could result in a denial of service to other interfaces. All traffic from this source MAC address will... |
<｜begin▁of▁sentence｜>
### Instruction:
TACACSD-3-PARAMETER
### Response:
(Severity: 3), (Category: SECURITY), (Description: An invalid argument was passed to either the tacacsd or one of its funtions.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the sys... |
<｜begin▁of▁sentence｜>
### Instruction:
RIP_POLICY-3-ORA_RUN
### Response:
(Severity: 3), (Category: ROUTING), (Description: Internal error in the routing policy library.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representat... |
<｜begin▁of▁sentence｜>
### Instruction:
PCIMGR-7-DEBUG_INFO
### Response:
None
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
PLX_FPD-3-UPGRADE_MD5SUM_ERROR
### Response:
(Severity: 3), (Category: DRIVER), (Description: PLX FPD EEPROM is corrupted or due to I2C issues, incorrect values are being read leading to mismatch in md5sum between the EEPROM and the stored md5sum. The output of 'show hw-module fpd... |
<｜begin▁of▁sentence｜>
### Instruction:
INFRA_MSG-5-RUN_LOGIN
### Response:
(Severity: 5), (Category: INFRA), (Description: User logged into shell by executing run command), (Recommended Action: This is informational that user accessed the linux shell of the router.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
LPTS_PREIFIB-4-EVM_TM_LEAF_NEW
### Response:
(Severity: 4), (Category: OS), (Description: An internal error was detected when trying to create a managed timer tree leaf for the event manager.), (Recommended Action: Restarting the process may fix the issue.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
PMIPV6-3-OUT_OF_MEMORY
### Response:
(Severity: 3), (Category: IP), (Description: pmipv6d process is running out of memory. This could be due to a memory leak. It is also possible that the process has not entirely run out of memory, but there is no single block of memory of reques... |
<｜begin▁of▁sentence｜>
### Instruction:
T1E1-4-WARNING
### Response:
(Severity: 4), (Category: L2), (Description: A warning is generated while executing the function in question. The message contains info about the location and cause of the failure and possibly anticipated actions/effects.), (Recommended Action: Verify ... |
<｜begin▁of▁sentence｜>
### Instruction:
CTRLIO-3-WAIT_EOD_FAIL
### Response:
(Severity: 3), (Category: PKT_INFRA), (Description: 'while waiting for EOD signal API failed.' 'process will exit with failure.'), (Recommended Action: 'Retry the issu operation.If error persists.' 'contact tac with 'show tech-support issu'.')
... |
<｜begin▁of▁sentence｜>
### Instruction:
IOFPGA-3-MAIN_THREAD_BLOCKED
### Response:
(Severity: 3), (Category: DRIVER), (Description: When IOFPGA driver main thread is blocked for more than the indicated time, key functionality of the driver will be affected. To allow the driver to recover from this condition, it will res... |
<｜begin▁of▁sentence｜>
### Instruction:
FGID_SVR-3-UNHANDLED_FGID_DNLD
### Response:
(Severity: 3), (Category: FABRIC), (Description: --), (Recommended Action: No action is required.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-4-SYSDB_SET_FAIL
### Response:
(Severity: 4), (Category: OS), (Description: Dumper stored various config related data in sysdb and it failed to get sysdb item. This might impact the dumper.), (Recommended Action: Please contact support with the following data. 1. show excep... |
<｜begin▁of▁sentence｜>
### Instruction:
FPD_BURNER-3-NO_MEM
### Response:
(Severity: 3), (Category: PLATFORM), (Description: No enough memory.), (Recommended Action: No action is required..)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
ASR9K_LICENSE-2-ENFORCE_OOC
### Response:
(Severity: 2), (Category: LICENSE), (Description: The licensed feature is enabled without appropriate licenses.), (Recommended Action: The customer should either purchase more licenses or disable the feature.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
ISSU_INFRA-3-STATE_LIB_ERROR
### Response:
(Severity: 3), (Category: INSTALL), (Description: An unexpected failure occurred attempting to read or update key ISSU state.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in ... |
<｜begin▁of▁sentence｜>
### Instruction:
CBC-3-SLOT_ID_CHANGE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: CBC detected unexpected slot id change. The system can no longer manage/monitor the card's environment conditions. Normally this means some HW issue on slot id pins, there are 6 pins per board to... |
<｜begin▁of▁sentence｜>
### Instruction:
d1qnetio-3-SUBBLOCK_REG_FAILED
### Response:
(Severity: 3), (Category: L2), (Description: The software forwarding support for IEEE802.1Q VLANs was unable to initialise on the specified node. Software forwarding VLAN functionality on the affected is likely not to work.), (Recommend... |
<｜begin▁of▁sentence｜>
### Instruction:
RIB-3-ECMP_ERR_ADD
### Response:
(Severity: 3), (Category: ROUTING), (Description: Protocol has registered for no ecmp support but is adding more than one path for a route.), (Recommended Action: *SUPPORT*)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
I2C-3-BP_EN_ERROR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Error while trying to grab or release the lock.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representat... |
<｜begin▁of▁sentence｜>
### Instruction:
XLNC-6-INSTALL_OBTAIN_VERSION_FAIL
### Response:
(Severity: 6), (Category: INFRA), (Description: XLNC has tried to read the loaded kernel version and the on-disk kernel version and has been unable to obtain this information. XLNC will not restart as part of an initial resync.), (R... |
<｜begin▁of▁sentence｜>
### Instruction:
TTY-6-SYSDB_INTERN
### Response:
(Severity: 6), (Category: MGBL), (Description: TTY Server is trying to access Sysdb-mc and an error [no members in group] is returned from Sysdb-mc to all the Clients. This is a generic issue with all the admin band processes which comes up earlier... |
<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the ignore-lsp-errors command in IS-IS?
### Response:
The ignore-lsp-errors command allows a router to ignore LSP packets with checksum errors rather than purging them. This can be useful in networks with faulty implementations that may generate LSPs with ch... |
<｜begin▁of▁sentence｜>
### Instruction:
CFP-2-LANE_7_HIGH_BIAS_ALARM
### Response:
(Severity: 2), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser bias greater than or equal to the high laser bias alarm threshold. The CFP is the pluggable optics on the line cards. The laser bias thre... |
<｜begin▁of▁sentence｜>
### Instruction:
PSU-3-INVALID_DATA_IN_IDPROM
### Response:
(Severity: 3), (Category: LIBRARY), (Description: The power module IDRPOM is not properly programmed.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical suppo... |
<｜begin▁of▁sentence｜>
### Instruction:
FSDB_AGG-1-FABRIC_MODE_CHANGE
### Response:
(Severity: 1), (Category: FABRIC), (Description: User has configured a fabric mode change. This configuration does not take effect without router reload. If standby RP present, wait for standby to be Opertional (check by 'show platform')... |
<｜begin▁of▁sentence｜>
### Instruction:
SIM_INFRA-6-INSTALL_ROLE
### Response:
(Severity: 6), (Category: PLATFORM), (Description: Role installation completed.), (Recommended Action: Reload the module using 'hw-module location <ISM> reload')
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP0_INTR_SLICE6_WORD_OUTSYNC_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP0_INTR_SLICE6_WORD_OUTSYNC interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. M... |
<｜begin▁of▁sentence｜>
### Instruction:
LDP-3-RX_BAD_PREFIX_LEN
### Response:
(Severity: 3), (Category: ROUTING), (Description: An LDP message containing a destination IP Prefix with a bad prefix length has been received from a peer.), (Recommended Action: Copy the error message exactly as it appears on the console or i... |
<｜begin▁of▁sentence｜>
### Instruction:
FSYNC-6-SSM_EPRTC
### Response:
(Severity: 6), (Category: L2), (Description: The quality level of the source has been changed to or from ePRTC.), (Recommended Action: None, this is an informational condition that does not require troubleshooting.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
ISIS-3-EVENT_CONN_CREATE_FAIL
### Response:
(Severity: 3), (Category: ROUTING), (Description: IS-IS failed to create a connection to an essential service during initialization. This is an internal software error. It requires a restart of the isis process for recovery.), (Recommend... |
<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_1_CHAR_ALIGN_0
### Response:
(Severity: 1), (Category: PLATFORM), (Description: XAUI to NPU-1 char alignment error on bridge instance-0.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. If the message recur... |
<｜begin▁of▁sentence｜>
### Instruction:
CMPP-4-ERR_EVM_CREATE
### Response:
(Severity: 4), (Category: INFRA), (Description: CMPP failed to create its Event Manager which is a critical resource for the operation of the process. This error may be caused by low memory resources. The process will abort and be restarted in a... |
<｜begin▁of▁sentence｜>
### Instruction:
FABRIC_DRVR-1-ERR_HW_INIT
### Response:
(Severity: 1), (Category: FABRIC), (Description: The board initialization failed the specified operation while configuring the device. The driver will exit and attempt to come up again. On multiple such failures, the board will be shutdown p... |
<｜begin▁of▁sentence｜>
### Instruction:
XTC-5-SR_POLICY_CANDIDATE_PATH_CHANGE
### Response:
(Severity: 5), (Category: OS), (Description: An SR policy changed to use a new candidate path preference. This message appears only if the <Bold>segment-routing logging policy status<NoBold> command is configured.), (Recommended ... |
<｜begin▁of▁sentence｜>
### Instruction:
ENVMON-2-SAT_FAN_AF_MISMATCH
### Response:
(Severity: 2), (Category: PLATFORM), (Description: This alarm is generated when fantrays's in the satellite are of opposite air flow type to each other. Satellite chassis shutsdown after two minutes from the time alarm is raised.), (Recom... |
<｜begin▁of▁sentence｜>
### Instruction:
SCONBKUP-7-RELOAD_REPLY_ERR
### Response:
(Severity: 7), (Category: MGBL), (Description: Error encountered while replying message during ASCII System Configuration.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your C... |
<｜begin▁of▁sentence｜>
### Instruction:
SYSDB-4-ENCODER_ERR
### Response:
(Severity: 4), (Category: SYSDB), (Description: Error starting bag encoder.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support represent... |
<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SP1_INTR_SLICE_ERR_2_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SP1_INTR_SLICE_ERR_2 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload location <>'. Make sure board i... |
<｜begin▁of▁sentence｜>
### Instruction:
INVMGR-3-FAILURE
### Response:
(Severity: 3), (Category: PLATFORM), (Description: an external API has failed in Inventory Manager. The details are supplied with the msg.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call y... |
<｜begin▁of▁sentence｜>
### Instruction:
XTC-5-PCE_PEER_STATE_CHANGE
### Response:
(Severity: 5), (Category: OS), (Description: An PCE peer has changed state. This message appears only if the <Bold>segment-routing logging pce peer-status <NoBold> command is configured for the XTC.), (Recommended Action: No action is requ... |
<｜begin▁of▁sentence｜>
### Instruction:
LIBIPPIMDLL-3-ENS_NRS_FAIL
### Response:
(Severity: 3), (Category: IP), (Description: An error occurred during ENS or NRS communication between the PIM and BGP processes. This can occur when the pim bgp producer or the pim mdt safi consumer - -fails to register/unregister with the... |
<｜begin▁of▁sentence｜>
### Instruction:
FABRICQ_MGR-4-ERR_IMDR_NOTIFY
### Response:
(Severity: 4), (Category: FABRIC), (Description: The Fabricq Mgr received an event from the iMDR Mgr that it did not register for.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, c... |
<｜begin▁of▁sentence｜>
### Instruction:
LC_CPIDB-2-OPEN
### Response:
(Severity: 2), (Category: PLATFORM), (Description: A run time error occurred while initializing the lc idb on the linecard. The reason for the error is dispalyed. Please call Cisco Support with the error information), (Recommended Action: Copy the err... |
<｜begin▁of▁sentence｜>
### Instruction:
FPD-6-INFO
### Response:
(Severity: 6), (Category: PLATFORM), (Description: This is a info message from FPD operation.), (Recommended Action: *NONE*)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
What is the purpose of the MPLS TE auto-bandwidth underflow feature?
### Response:
The MPLS TE auto-bandwidth underflow feature allows auto-bandwidth to react more quickly to drops in traffic flow by triggering an immediate bandwidth adjustment when the measured rate drops below a... |
<｜begin▁of▁sentence｜>
### Instruction:
IGMP_MTRACE-3-MSG_ERROR
### Response:
(Severity: 3), (Category: ROUTING), (Description: Messaging error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the represe... |
<｜begin▁of▁sentence｜>
### Instruction:
GDOI-4-SVC_WARNING
### Response:
(Severity: 4), (Category: OS), (Description: A service API warning is displayed.), (Recommended Action: *SUPPORT*)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
FAB_SVR_TOPAZ-7-ERR_INIT
### Response:
(Severity: 7), (Category: FABRIC), (Description: Fabric server encountered the specified error during the initialization sequence. This facility is deemed crucial and hence the process is automatically restarted on this failure. The System Ma... |
<｜begin▁of▁sentence｜>
### Instruction:
spp-6-SPAN_FILE_WRITE_SUCCESSFUL
### Response:
(Severity: 6), (Category: PKT_INFRA), (Description: SPAN write to file was successful.), (Recommended Action: No action is required.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
RADIUSD-3-RIB_LOCAL_ADDRESS_ERR
### Response:
(Severity: 3), (Category: SECURITY), (Description: An internal software error has occurred.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support repr... |
<｜begin▁of▁sentence｜>
### Instruction:
CROSSBAR-1-SERDES_ERROR_LNK4
### Response:
(Severity: 1), (Category: PLATFORM), (Description: Crossbar driver detected a serdes error on link 4.), (Recommended Action: If this alarm persists for a period of 60 seconds after all the cards are in IOS-XR RUN state, then please reload... |
<｜begin▁of▁sentence｜>
### Instruction:
XBAR-7-ERR_LWM_EVENT_BLOCK
### Response:
(Severity: 7), (Category: PLATFORM), (Description: Crossbar driver Event Manager event block error), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support re... |
<｜begin▁of▁sentence｜>
### Instruction:
PBR-3-EA_INIT
### Response:
(Severity: 3), (Category: FORWARDING), (Description: This message indicates that an error has occurred during the 'pbr_ea' process initialization and it may prevent PBR from functioning. Particular reason is included in the message), (Recommended Action... |
<｜begin▁of▁sentence｜>
### Instruction:
TACACSD-3-ERR_CONFIG_SERVER
### Response:
(Severity: 3), (Category: SECURITY), (Description: A configuration error has occured.), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative... |
<｜begin▁of▁sentence｜>
### Instruction:
CFP-3-LANE_0_LOW_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CFP laser temperature less than or equal to the low temperature warning threshold. The CFP is the pluggable optics on the line cards. The temperat... |
<｜begin▁of▁sentence｜>
### Instruction:
PLIM-4-XFP_HOTSWAP
### Response:
(Severity: 4), (Category: L2), (Description: The inserted XFP failed to power on correctly during initialization.), (Recommended Action: None. Software corrected the issue by power cycling the XFP.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
STATSD-3-SHMEM_CORRUPTED
### Response:
(Severity: 3), (Category: MGBL), (Description: In certain unlikely scenarios it is possible that during a process restart the shared memory region used by the stats infrastructure can become corrupted. In most cases this will automatically be... |
<｜begin▁of▁sentence｜>
### Instruction:
DAD-3-SETUP
### Response:
(Severity: 3), (Category: ROUTING), (Description: There was something illegal about the setup operations that where performed. This should be a straight coding error that will fail everytime and should be cleaned up before releasing the code.), (Recommend... |
<｜begin▁of▁sentence｜>
### Instruction:
PPP_MA-4-ERR_BACKEND
### Response:
(Severity: 4), (Category: L2), (Description: PPP MA encountered an error using the Backend service related to use of either SysDB or SubDB. The error message describes what operation has failed and why it failed. The most likely reason for this i... |
<｜begin▁of▁sentence｜>
### Instruction:
INSTMGR-3-XR_ISO_MISSING_IN_INPUT
### Response:
(Severity: 3), (Category: INFRA), (Description: XR iso should be provided in the input while carving new SDR. Invalid input.), (Recommended Action: Provide XR ISO in the input image list and try carving SDR again.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
BRIDGE-1-XAUI_1_TX_FIFO_OFLOW_1
### Response:
(Severity: 1), (Category: PLATFORM), (Description: XAUI interface to NPU-1 reported tx fifo overflow on bridge instance - 1.), (Recommended Action: If the error persists, please reload the board using the command 'reload location <>'. ... |
<｜begin▁of▁sentence｜>
### Instruction:
L2VPN-6-MAC_LIMIT_PW_SET
### Response:
(Severity: 6), (Category: L2), (Description: Number of MAC addresses in the pseudowire has reached the configured maximum. If MAC limit action to disable MAC learning and unicast flooding has been configured on the port, then that particular ... |
<｜begin▁of▁sentence｜>
### Instruction:
RDM_LIB-6-RWLOCK_TIMEOUT
### Response:
(Severity: 6), (Category: PLATFORM), (Description: The RDM server timed-out waiting to acquire a write lock on the global (context) read-write lock. This could happen if the client was holding the lock for too long or has exited. The RDM serv... |
<｜begin▁of▁sentence｜>
### Instruction:
VS_CLIENT-3-CACHE_LOOKUP
### Response:
(Severity: 3), (Category: INSTALL), (Description: Test code only - will never be seen by customers.), (Recommended Action: --)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-3-SLICE_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: 1. Slice failure: Slice failure affecting all slices and no slice is powered UP.), (Recommended Action: System is not usuable. Power failure happened during system boot. Need to reload the boar... |
<｜begin▁of▁sentence｜>
### Instruction:
DUMPER-7-SYSDB_ITEM_TYPE_BAD
### Response:
(Severity: 7), (Category: OS), (Description: Dumper keeps various config related data in sysdb. Unexpected item type under config for dumper. This might impact the funcitoning of the dumper.), (Recommended Action: Restart dumper config an... |
<｜begin▁of▁sentence｜>
### Instruction:
FSDB_AGG-3-PM_INIT_FAILURE
### Response:
(Severity: 3), (Category: FABRIC), (Description: FSDB server failed PM initialization with above reson.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in the system log, call you... |
<｜begin▁of▁sentence｜>
### Instruction:
NPU_DRVR-3-HW_MODULE_PROFILE_TTL_CHASSIS_CFG_CHANGED
### Response:
(Severity: 3), (Category: FABRIC), (Description: 1. If the hw-module command is used to configure the user defined configs, there will be inconsistency between the user config and the hardware. Since the driver in ... |
<｜begin▁of▁sentence｜>
### Instruction:
NPUXBAR_BRIDGE-2-PCIE_TXIF_FIFO_SBE
### Response:
(Severity: 2), (Category: PLATFORM), (Description: CIB PCIe Tx interface FIFO single bit error.), (Recommended Action: None.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
LIBNOTIFY-7-MEMORY
### Response:
(Severity: 7), (Category: INSTALL), (Description: The system is running out of memory and was not able to allocate sufficient memory to carry out the requested operation), (Recommended Action: Reduce other system activity to ease memory demands. If... |
<｜begin▁of▁sentence｜>
### Instruction:
EDRM_SERVER-3-PROCESS_INIT
### Response:
(Severity: 3), (Category: L2), (Description: The initialization of the EDRM server process failed due to the indicated reason.), (Recommended Action: None. The process initialization will be retried automatically.)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
FGID_AGG-3-ERR_INTERNAL_SW
### Response:
(Severity: 3), (Category: FABRIC), (Description: The FGID Aggregator encountered the annunciated SW error. The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times the error is encountered, ... |
<｜begin▁of▁sentence｜>
### Instruction:
CPAK-3-LANE_5_HIGH_TEMP_WARNING
### Response:
(Severity: 3), (Category: PLATFORM), (Description: Environmental monitoring has detected a CPAK laser temperature greater than or equal to the high temperature warning threshold. The CPAK is the pluggable optics on the line cards. The ... |
<｜begin▁of▁sentence｜>
### Instruction:
CONFIGEDM-3-FAILEDREGCOMP
### Response:
(Severity: 3), (Category: MGBL), (Description: 'Compiling a regular expression failed with the reason mentioned in the message. This may lead to wrong 'show config failed' listing.'), (Recommended Action: Please contact TAC with the output o... |
<｜begin▁of▁sentence｜>
### Instruction:
IMFPGA-3-IDT_RECOV_CLK_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: IDT Recovery clock I2C Failure/Success while accessing device), (Recommended Action: Copy the error message exactly as it appears on the console or in the system log, call your Cisco techni... |
<｜begin▁of▁sentence｜>
### Instruction:
CIH-1-ASIC_ERROR_PERSIST_THRESHOLD
### Response:
(Severity: 1), (Category: PLATFORM), (Description: An ASIC error threshold was crossed.), (Recommended Action: *None*)
<|EOT|>
|
<｜begin▁of▁sentence｜>
### Instruction:
PRP_UPGRADE-3-SPAWN_RM
### Response:
(Severity: 3), (Category: MGBL), (Description: Failed to spawn the 'rm' process. Unable to remove existing configuration from PRP.), (Recommended Action: If the message recurs, copy the error message exactly as it appears on the console or in t... |
<｜begin▁of▁sentence｜>
### Instruction:
FIA-1-SKT_SMC0_INTR_OOB_ERROR_LANE_INDICATE_11_0
### Response:
(Severity: 1), (Category: FABRIC), (Description: SKT_SMC0_INTR_OOB_ERROR_LANE_INDICATE_11 interrupt on FIA), (Recommended Action: Wait a few minutes. If it doesn't recover, please reload the board using command 'reload... |
<｜begin▁of▁sentence｜>
### Instruction:
TUNNEL_GRE_EA-3-UPDATE_ERR
### Response:
(Severity: 3), (Category: PLATFORM), (Description: This is an error message in the platform specific code software to indicate anomolies while initializing GRE Feature. This error is most likely caused by a temporary situation within the fe... |
<｜begin▁of▁sentence｜>
### Instruction:
MXPDRVR-6-NCS1K_PORT_RESET_SUCCESS
### Response:
None
<|EOT|>
|
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.