text stringlengths 318 2.71k |
|---|
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the requirement for network traffic patterns in service capabilities?
option 1: To consider the overheads and signalling surge caused by frequent transmissions of large a... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
Which conditions must be satisfied for traffic steering from E-UTRAN to WLAN?
option 1: RSRPmeas < ThreshServingOffloadWLAN, LowP and ChannelUtilizationWLAN < ThreshChUtilWLAN, L... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What are the characteristics of the interfering signals for E-UTRA SAN?
option 1: A PDSCH containing data and reference symbols
option 2: A PUSCH containing data and reference sy... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the purpose of integrity protection in NR connected to 5GC security?
option 1: Provides user data confidentiality
option 2: Provides user data integrity protection
option... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
When does the NG-RAN perform NG-RAN paging before reporting the UE's location?
option 1: When the UE is in RRC_CONNECTED state
option 2: When the UE is in RRC_INACTIVE state
opti... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the key characteristic of a roaming broker enabled Home Environment?
option 1: It has a direct commercial agreement with different serving networks.
option 2: It interwor... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards overview
Which specifications define the Network Resource Model (NRM) information service and solution set for 5G networks and network slicing?
option 1: TS 28.541, TS 28.623, TS 28.622
option ... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What does the Timing Delta MAC CE indicate to an IAB-node?
option 1: Time difference between DU transmission and IAB-MT reception
option 2: Time difference between IAB-MT recepti... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
Is supporting periodic location reporting a requirement for Emergency Services?
option 1: Yes, it is a requirement
option 2: No, it is not a requirement
option 3: It depends on a... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the purpose of fraud control in the home environment?
option 1: To collect charging information from serving networks
option 2: To notify the customer care centre about c... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards overview
Which feature in Rel-16 allows transmission of uplink data payload without performing random access procedures?
option 1: UE-group wake-up signals (GWUS)
option 2: Mobile-terminated ea... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards overview
What is the main goal of enabling 5G LAN-type services and virtual networks?
option 1: To provide long distance access and mobility
option 2: To offer private communication using IP an... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards overview
What is the key functionality introduced for prioritization between overlapping uplink resources of one UE in the 5G Core network?
option 1: Support for up to eight simultaneously acti... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards overview
What action does the network take if a QCI-1 bearer setup request for VoLTE is rejected during a terminating session?
option 1: The call will be dropped
option 2: The network will retr... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What does network diagnostics aim to achieve?
option 1: Early detection of faults
option 2: Evaluation of impact on the service/network
option 3: Clear explanations of failures
o... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards overview
What is the purpose of load-balancing steering mode enhancements?
option 1: To provide better network performance measurements
option 2: To prioritize non-3GPP access over 3GPP access ... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the maximum number of CBR range configurations for sidelink communication congestion control?
option 1: 8
option 2: 7
option 3: 16
option 4: 15
option 5: 12
### Response:... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What information is included in the Location Report message when the NG-RAN detects that the UE has moved out of or into multiple areas of interest?
option 1: UE Location
option ... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
Which satellite access network type has the lowest end-to-end latency requirement in a 5G system?
option 1: GEO based satellite access
option 2: MEO based satellite access
option... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
Which standard defines the integration of the 5G System into a TSN data network (DN)?
option 1: TS 23.040
option 2: TS 23.273
option 3: TS 23.502
option 4: TS 23.540
option 5: IE... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the on-duration of DRX?
option 1: The duration that the UE monitors PDCCH
option 2: The duration until a retransmission can be expected
option 3: The duration that the UE... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What inputs are required for the Nmfaf_3caDataManagement_Notify service operation?
option 1: Data Consumer or Analytics Consumer Information, Transaction Reference Id
option 2: N... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards overview
Which 3GPP working group is responsible for defining the security aspects of LTE based V2X communication?
option 1: SA WG1
option 2: SA WG2
option 3: SA WG3
option 4: CT WG1
option 5: ... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards overview
What are the data services included in MCData in Release 14?
option 1: Short message service only
option 2: File transfer service only
option 3: Both short message service and file tra... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the purpose of service continuity in the Evolved Packet System?
option 1: To optimize routing for user plane traffic
option 2: To support mobility within and across acces... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What does the SMF do when it receives the enabling request for analytics information exposure from a UE?
option 1: Subscribes to the Analytics ID for the UE
option 2: Checks if i... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What can the user change in the privacy exception list?
option 1: The LCS Client and/or group of LCS Clients list
option 2: The codeword
option 3: The requestor
option 4: The ser... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What does a '1' value for a bit in the TRS availability indication field indicate?
option 1: Change to a current assumption for the availability of TRS resource sets
option 2: No... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the purpose of transferring CDRs via Bx?
option 1: To transfer CDRs from CDF to CGF for processing.
option 2: To transfer CDRs from CGF to BD for persistent storage.
opti... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the purpose of spreading in PUCCH formats 3 and 4?
option 1: To increase the bandwidth of the PUCCH transmission.
option 2: To enhance the orthogonality of the transmitte... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
How does the NWDAF collect input data for PDU Session traffic analytics?
option 1: Directly from the UPF using the 'UserDataUsageMeasures' event exposure event.
option 2: Indirec... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
Which of the following options does NWDAF collect input data from?
option 1: OAM
option 2: NRF
option 3: AMF
option 4: All of the above
### Response:
option 4: All of the above
... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards overview
What is the purpose of the xMB API?
option 1: To define the reference point specification for MBMS
option 2: To handle packet losses in MBMS
option 3: To manage content providers in MB... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the purpose of Indirect 3GPP Communication?
option 1: To connect an Evolved ProSe Remote UE to the 3GPP network via an Evolved ProSe UE-to-Network Relay
option 2: To enab... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the SNR target for higher CBWs assuming 16 and 20 dB?
option 1: 14.4 dB
option 2: 18.6 dB
option 3: 16 dB
option 4: 20 dB
### Response:
option 3: 16 dB
explanation :The ... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
How is a 5G VN group identified?
option 1: By the UE's GPSI
option 2: By the AF using the External Group ID
option 3: By the NEF using the Internal Group ID
option 4: By the UDM ... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
Which message contains the low layer configuration for the UE?
option 1: INITIAL UE MESSAGE
option 2: DL RRC MESSAGE TRANSFER
option 3: RRC CONNECTION SETUP COMPLETE
option 4: UL... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What are the two main groups of logical channels in the MAC sublayer?
option 1: Broadcast channels and Dedicated channels
option 2: Control channels and Traffic channels
option 3... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards overview
What is the purpose of the feature 'Multi-server bearer coordination' for MBMS usage in MC services?
option 1: Allowing a single MC service server to manage all MBMS media transmission... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is VarMeasIdleConfig used for?
option 1: To configure the measurements to be performed by the UE while in RRC_IDLE or RRC_INACTIVE
option 2: To configure the reporting of me... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the role of a Relay Node (RN) in E-UTRAN?
option 1: To terminate the radio protocols of the E-UTRA radio interface
option 2: To manage the EPS bearers and session for the... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the purpose of S-NSSAI based congestion control?
option 1: To restrict data transfer via Control Plane CIoT 5GS Optimization
option 2: To avoid and handle NAS signalling ... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
Which access control mechanisms are supported by NG-RAN?
option 1: RACH back off
option 2: RRC Connection Reject
option 3: RRC Connection Release
option 4: UE based access barrin... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the purpose of the N26 interface in the non-roaming architecture for interworking between 5GS and EPC?
option 1: To enable interworking between EPC and the NG core
option... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
Which interface is used between the BSC and BTS to support the services offered to the GSM users and subscribers?
option 1: S1-MME-interface
option 2: S1-U-interface
option 3: Ab... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the purpose of the 'Connect-streaming' communication paradigm in management service interactions?
option 1: To authenticate the management service consumer
option 2: To e... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
Which interface is used to transfer OAM traffic between the RN and the OAM system?
option 1: S1 interface
option 2: X2 interface
option 3: Un interface
option 4: MME interface
op... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
Which state is the UE expected to receive the DL PRS for RTT-based propagation delay compensation in?
option 1: RRC_IDLE state
option 2: RRC_CONNECTED state
option 3: RRC_INACTIV... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards overview
What aspect does the CT Work Item "V8-CT" focus on?
option 1: Emergency call in Local breakout roaming architecture
option 2: Location determination at IMS entities in the HPLMN
option... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
Where can the UE receive PLMN identity and CN type information in a given cell?
option 1: Data channel
option 2: Access channel
option 3: Control channel
option 4: Broadcast chan... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the cyclic-prefix length for normal cyclic prefix in SC-FDMA?
option 1: 160Ts
option 2: 144Ts
option 3: 512Ts
option 4: 256Ts
option 5: 768Ts
### Response:
option 2: 144... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What physical channel is used for sidelink transmitted data itself?
option 1: PSCCH
option 2: PSBCH
option 3: PSFCH
option 4: PSSCH
option 5: Synchronization signal
### Response:... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the reference point between the GGSN and a packet data network?
option 1: Mm Reference Point
option 2: GMLC - external LCS Client
option 3: Le reference point
option 4: G... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What can a consumer of user data congestion analytics request?
option 1: Identifiers of the applications that contribute the most to the traffic
option 2: Preferred level of accu... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What actions are taken when an AMF fails and is detected by the 5G-AN?
option 1: AMF is deregistered from NRF
option 2: AMF is marked as failed in the 5G-AN
option 3: NGAP UE-TNL... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
How are the metrics related to the provided thresholds evaluated for WLAN BSS?
option 1: The UE evaluates all metrics related to the provided thresholds.
option 2: The UE exclude... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
When does the NG-RAN initiate the Connection Inactive procedure with CN based MT communication handling?
option 1: When the UE is in CM-CONNECTED with RRC_CONNECTED state and has... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the purpose of the power headroom reports (PHR)?
option 1: To provide support for power-aware packet scheduling
option 2: To allocate resources for the initial HARQ trans... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards overview
What are the high-level features specified for 5G Location Services?
option 1: LCS Quality of services
option 2: LMF selection, UE LCS privacy handling
option 3: LCS Quality of service... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
Which network function is responsible for network exposure?
option 1: AMF
option 2: SMF
option 3: NRF
option 4: NEF
option 5: UDM
### Response:
option 4: NEF
explanation :The Ne... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the purpose of Formatting Instructions?
option 1: To buffer and send several notifications in one message
option 2: To specify the time window for sending notifications
o... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards overview
What is a capability added in the V2X Application Enabler (VAE) layer?
option 1: V2X UE group management
option 2: V2X service discovery
option 3: Session-oriented services
option 4: N... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What defines the comb size of a DL PRS resource?
option 1: dl-PRS-ResourceSymbolOffset
option 2: dl-PRS-StartPRB
option 3: numSymbols
option 4: dl-PRS-ResourceSlotOffset
option 5... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What does the NWDAF containing MTLF consider when using untrusted AF(s) as data sources?
option 1: The rating of untrusted AF(s)
option 2: The accuracy of ML models
option 3: Bot... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What does a '0' value for a bit of the bitmap, provided by dormancyGroupOutsideActiveTime, indicate?
option 1: A firstOutsideActiveTimeBWP-Id for the UE.
option 2: A dormant DL B... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What does the 5G system need to support for the tactile and multi-modal communication service?
option 1: Ability to provide customized QoS handling for each communication mode
op... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What happens when a registration attempt is rejected with a cause of 'permanent' PLMN restriction?
option 1: The PLMN is added to the forbidden PLMNs list
option 2: The UE enters... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the interaction between the 5GC NF(s) and the EASDF?
option 1: They do not interact within a PLMN
option 2: They interact using DNS messages
option 3: They interact to ex... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the relative increase in cable loss per meter from 43.5 GHz to 71 GHz?
option 1: 0.33 dB
option 2: 0.9 dB
option 3: 3.5 dB
option 4: 7.7 dB
### Response:
option 1: 0.33 ... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the polarization slant angle for a purely vertically polarized antenna element?
option 1: 90 degrees
option 2: 180 degrees
option 3: 45 degrees
option 4: 0 degrees
option... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What determines the mapping between service data of different domains?
option 1: The visited network
option 2: The home environment
option 3: The roaming agreement
option 4: The ... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What aspect of the URSP rule does the Application Traffic Descriptor from the AF guidance affect?
option 1: Route Selection Descriptor Precedence
option 2: URSP Traffic Descripto... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
Which specification defines the Nchf_SpendingLimitControl service?
option 1: TS 23.203
option 2: TS 32.27x
option 3: TS 23.502
option 4: TS 23.272
### Response:
option 3: TS 23.... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards overview
What is Network Slice-Specific Authentication and Authorization (NSSAA)?
option 1: The authentication and authorization process for the SUPI in the 5G system
option 2: The authenticati... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the motion-to-photon latency range required to support VR environments with low motion-to-photon capabilities?
option 1: 1 ms to 5 ms
option 2: 5 ms to 10 ms
option 3: 7 ... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
Which event notification is used to monitor the movement of candidate UEs in/out of the monitoring area?
option 1: Namf_EventExposure_Subscribe service
option 2: Npcf_PolicyAutho... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the purpose of the HR-SBO PDU Session in roaming?
option 1: To establish a secure connection between the UE and the V-SMF
option 2: To enable local traffic routing in the... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the purpose of the UE Capability Retrieval framework?
option 1: To report the UE's radio access capabilities to the network
option 2: To request specific capabilities fro... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What functionality does LLDP provide in the TSN Transport Network?
option 1: Dynamic address assignment
option 2: Stream management
option 3: Topology information exchange
option... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the function of the Radio Bearer Service?
option 1: To provide transport between RAN and CN
option 2: To handle the radio interface transport
option 3: To provide QoS in ... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What does the UE ignore regarding cell access restrictions for cell reselection when camping on E-UTRA connected to 5GC?
option 1: Access Class or ACDC category restrictions
opti... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the MDA capability for paging optimization analysis used for?
option 1: Optimizing network resource usage
option 2: Predicting potential network failures
option 3: Analyz... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
Which two new QoS Class Identifiers (QCIs) are added in 5G for Ultra Low Latency GBR services?
option 1: QCI 80 and QCI 81
option 2: QCI 84 and QCI 85
option 3: QCI 82 and QCI 83... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What reference point enables interactions between the EES and the EEC?
option 1: EDGE-1
option 2: EDGE-2
option 3: EDGE-3
option 4: EDGE-4
### Response:
option 1: EDGE-1
explana... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the definition of OTA sensitivity?
option 1: The receiver's ability to receive an unwanted signal in the presence of a wanted signal.
option 2: The minimum mean power rec... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
When does the UE apply the MCCH information acquisition procedure?
option 1: Upon receiving SIB20 of an SCell
option 2: Upon receiving a change notification about MCCH informatio... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards overview
Which 3GPP release introduced NR-V2X with a focus on V2X (Vehicle-to-Everything) communication?
option 1: Rel-8
option 2: Rel-12
option 3: Rel-14
option 4: Rel-16
### Response:
option ... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is a multi-modal communication service?
option 1: Service that supports communication between different MNOs
option 2: Service that enables communication between different d... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is one of the challenges of energy saving schemes in the radio access network (RAN)?
option 1: Inaccurate cell load prediction
option 2: Lack of energy-saving related parame... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the range of frequencies for which the O2I car penetration loss models are applicable?
option 1: 0.1-10 GHz
option 2: 0.6-60 GHz
option 3: 100-1000 GHz
option 4: 10-100 G... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
In which bearer option is the S1-U connection terminated in the MeNB?
option 1: Split bearer
option 2: SCG bearer
option 3: MCG bearer
option 4: Primary bearer
### Response:
opt... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
When does the UE monitor DCP on the active BWP?
option 1: During active-time and BWP switching
option 2: During measurement gaps and CFRA preamble transmission
option 3: During P... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards overview
What is the purpose of introducing shorter scheduling periods in downlink and sidelink for V2X messages?
option 1: To reduce latency for V2X services
option 2: To increase power saving... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
Which USIM registration triggers the allocation of a new 5G-GUTI for the Paging Timing Collision Control feature?
option 1: Emergency registration
option 2: Normal registration
o... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the purpose of the MnS discovery service?
option 1: To enable MnS instances to be discovered by MnS consumers
option 2: To provide access control capabilities in a multip... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the purpose of the WI 'OAM14-FILMEAS'?
option 1: Management of measurements for cross-operator accounting
option 2: Management concepts, architecture, and requirements
op... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the purpose of dynamic resource schedulers in MAC in gNB?
option 1: To allocate physical layer resources for downlink and uplink
option 2: To configure the parameters of ... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
How does the UE determine the PDU Session Pair ID and/or RSN for redundant PDU Sessions in URLLC?
option 1: The UE determines them based on URSP rules and matched traffic descrip... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What is the purpose of 3GPP PS Data Off feature?
option 1: To prevent transport via PDN connections of all data packets
option 2: To configure operator services
option 3: To prov... |
### Instruction:
Choose the most appropriate option for the given question. Also provide an explanation.
Category :Standards specifications
What does VarMeasReportList include?
option 1: Information about the measurements that have been completed by the UE
option 2: Information about the measurements that are current... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.