text stringclasses 19
values |
|---|
<<SYS>>
You are a helpful and friendly, who knows how to program in cumulus Linux. you will be configuring Nivida devices using nv command to set their configuration.
<</SYS>>
<<SYS>>
<s>[INST] On leaf01 : Assign an ip address to the loopback interface. [/INST] nv set interface lo ip address 10.255.255.1/32
nv set i... |
<<SYS>>
You are a helpful and friendly, who knows how to program in cumulus Linux. you will be configuring Nivida devices using nv command to set their configuration.
<</SYS>>
<<SYS>>
<s>[INST] On leaf02 : Assign an ip address to the loopback interface. [/INST] nv set interface lo ip address 10.255.255.2/32
nv set s... |
<<SYS>>
You are a helpful and friendly, who knows how to program in cumulus Linux. you will be configuring Nivida devices using nv command to set their configuration.
<</SYS>>
<<SYS>>
<s>[INST] Verify loopback IP address configuration [/INST] net show interface lo</s>
<</SYS>> |
<<SYS>>
You are a helpful and friendly, who knows how to program in cumulus Linux. you will be configuring Nivida devices using nv command to set their configuration.
<</SYS>>
<<SYS>>
<s>[INST] On leaf01 : Create a bond with members swp49 and swp50. [/INST] nv set interface bond0 bond member swp49-50
nv config app... |
<<SYS>>
You are a helpful and friendly, who knows how to program in cumulus Linux. you will be configuring Nivida devices using nv command to set their configuration.
<</SYS>>
<<SYS>>
<s>[INST] Check status of the bond between two switches. Verify that the bond is operational by checking the status of the bond and ... |
<<SYS>>
You are a helpful and friendly, who knows how to program in cumulus Linux. you will be configuring Nivida devices using nv command to set their configuration.
<</SYS>>
<<SYS>>
<s>[INST] On leaf01 : Create a bridge with vlans 10 and 20. [/INST] nv set bridge domain br_default vlan 10,20</s>
<</SYS>> |
<<SYS>>
You are a helpful and friendly, who knows how to program in cumulus Linux. you will be configuring Nivida devices using nv command to set their configuration.
<</SYS>>
<<SYS>>
<s>[INST] Add swp1 and bond0 as a member to the bridge. Note: The name bond0 is case sensitive in all places. [/INST] nv set interfac... |
<<SYS>>
You are a helpful and friendly, who knows how to program in cumulus Linux. you will be configuring Nivida devices using nv command to set their configuration.
<</SYS>>
<<SYS>>
<s>[INST] Configure swp1 as an access port for vlan 10 [/INST] nv set interface swp1 bridge domain br_default access 10</s>
<</SYS>> |
<<SYS>>
You are a helpful and friendly, who knows how to program in cumulus Linux. you will be configuring Nivida devices using nv command to set their configuration.
<</SYS>>
<<SYS>>
<s>[INST] Commit the changes. [/INST] nv config apply</s>
<</SYS>> |
<<SYS>>
You are a helpful and friendly, who knows how to program in cumulus Linux. you will be configuring Nivida devices using nv command to set their configuration.
<</SYS>>
<<SYS>>
<s>[INST] On leaf02 : Repeat the same steps but use swp2 as the access port towards the server. [/INST] nv set bridge domain br_defau... |
<<SYS>>
You are a helpful and friendly, who knows how to program in cumulus Linux. you will be configuring Nivida devices using nv command to set their configuration.
<</SYS>>
<<SYS>>
<s>[INST] Verify the configuration on leaf01 by checking that swp1 and BOND0 are part of the bridge. [/INST] net show bridge vlan</s>... |
<<SYS>>
You are a helpful and friendly, who knows how to program in cumulus Linux. you will be configuring Nivida devices using nv command to set their configuration.
<</SYS>>
<<SYS>>
<s>[INST] Verify the same configuration on leaf02 by checking that swp2 and BOND0 are part of the bridge. [/INST] net show bridge v... |
<<SYS>>
You are a helpful and friendly, who knows how to program in cumulus Linux. you will be configuring Nivida devices using nv command to set their configuration.
<</SYS>>
<<SYS>>
<s>[INST] On leaf01 : Create an SVI for vlan10. [/INST] nv set interface vlan10 ip address 10.0.10.2/24</s>
<</SYS>> |
<<SYS>>
You are a helpful and friendly, who knows how to program in cumulus Linux. you will be configuring Nivida devices using nv command to set their configuration.
<</SYS>>
<<SYS>>
<s>[INST] Create an SVI for vlan 20. [/INST] nv set interface vlan20 ip address 10.0.20.2/24</s>
<</SYS>> |
<<SYS>>
You are a helpful and friendly, who knows how to program in cumulus Linux. you will be configuring Nivida devices using nv command to set their configuration.
<</SYS>>
<<SYS>>
<s>[INST] On leaf01 : Apply a VRR address for vlan10. [/INST] nv set interface vlan10 ip vrr address 10.0.10.1/24
nv set interface vl... |
<<SYS>>
You are a helpful and friendly, who knows how to program in cumulus Linux. you will be configuring Nivida devices using nv command to set their configuration.
<</SYS>>
<<SYS>>
<s>[INST] On leaf01 : Apply a VRR address for vlan20. [/INST] nv set interface vlan20 ip vrr address 10.0.20.1/24
nv set interface vl... |
<<SYS>>
You are a helpful and friendly, who knows how to program in cumulus Linux. you will be configuring Nivida devices using nv command to set their configuration.
<</SYS>>
<<SYS>>
<s>[INST] On leaf01: Commit the changes. [/INST] nv config apply</s>
<</SYS>> |
<<SYS>>
You are a helpful and friendly, who knows how to program in cumulus Linux. you will be configuring Nivida devices using nv command to set their configuration.
<</SYS>>
<<SYS>>
<s>[INST] Create an SVI for vlan10.
On leaf01 : Create an SVI for vlan 20.
On leaf02 : Create an SVI for vlan 20.
On leaf02 : Apply ... |
<<SYS>>
You are a helpful and friendly, who knows how to program in cumulus Linux. you will be configuring Nivida devices using nv command to set their configuration.
<</SYS>>
<<SYS>>
<s>[INST] Verify MAC address tables [/INST] net show bridge macs
</s>
<</SYS>> |
README.md exists but content is empty.
- Downloads last month
- 9