Daily Papers

Predicting the microstructural and morphological evolution of materials through phase-field modelling is computationally intensive, particularly for high-throughput parametric studies. While neural operators such as the Fourier neural operator (FNO) show promise in accelerating the solution of parametric partial differential equations (PDEs), the lack of explicit physical constraints, may limit generalisation and long-term accuracy for complex phase-field dynamics. Here, we develop a physics-informed neural operator framework to learn parametric phase-field PDEs, namely PF-PINO. By embedding the residuals of phase-field governing equations into the data-fidelity loss function, our framework effectively enforces physical constraints during training. We validate PF-PINO against benchmark phase-field problems, including electrochemical corrosion, dendritic crystal solidification, and spinodal decomposition. Our results demonstrate that PF-PINO significantly outperforms conventional FNO in accuracy, generalisation capability, and long-term stability. This work provides a robust and efficient computational tool for phase-field modelling and highlights the potential of physics-informed neural operators to advance scientific machine learning for complex interfacial evolution problems.

Despite the long history of electrochemistry, there is a lack of quantitative algorithms that rigorously correlate experiment with theory. Electrochemical modeling has had advanced across empirical, analytical, numerical, and data-driven paradigms. Data-driven machine learning and physics based electrochemical modeling, however, have not been explicitly linked. Here we introduce Differentiable Electrochemistry, a mew paradigm in electrochemical modeling that integrates thermodynamics, kinetics and mass transport with differentiable programming enabled by automatic differentiation. By making the entire electrochemical simulation end-to-end differentiable, this framework enables gradient-based optimization for mechanistic discovery from experimental and simulation data, achieving approximately one to two orders of improvement over gradient-free methods. We develop a rich repository of differentiable simulators across diverse mechanisms, and apply Differentiable Electrochemistry to bottleneck problems in kinetic analysis. Specifically, Differentiable Electrochemistry advances beyond Tafel and Nicholson method by removing several limitations including Tafel region selection, and identifies the electron transfer mechanism in Li metal electrodeposition/stripping by parameterizing the full Marcus-Hush-Chidsey formalism. In addition, Differentiable Electrochemistry interprets Operando X-ray measurements in concentrated electrolyte by coupling concentration and velocity theories. This framework resolves ambiguity when multiple electrochemical theories intertwine, and establishes a physics-consistent and data-efficient foundation for predictive electrochemical modeling.

In this work, we demonstrate that an impugn of energy density for sodium chemistries can be prevail through an anode-free architecture enabled by the use of a (nanocarbon/Cobaltoxide) nucleation layer formed on Aluminium current collectors. Electrochemical studies show this configuration to provide highly stable and efficient plating and stripping of sodium metal over a range of currents up to 5 mA/cm2, sodium loading up to 14 mAh/cm2, and with long-term endurance exceeding 1000 cycles at a current of 0.7 mA/cm2. Building upon this anode-free architecture, we demonstrate a full cell using a presodiated pyrite cathode to achieve energy densities of 400 Wh/kg, far surpassing recent reports on SIBs and even the theoretical maximum for LIB technology while still relying on naturally abundant raw materials and cost-effective aqueous processing.

Liquid electrolytes are critical components of next-generation energy storage systems, enabling fast ion transport, minimizing interfacial resistance, and ensuring electrochemical stability for long-term battery performance. However, measuring electrolyte properties and designing formulations remain experimentally and computationally expensive. In this work, we present a unified framework for designing liquid electrolyte formulation, integrating a forward predictive model with an inverse generative approach. Leveraging both computational and experimental data collected from literature and extensive molecular simulations, we train a predictive model capable of accurately estimating electrolyte properties from ionic conductivity to solvation structure. Our physics-informed architecture preserves permutation invariance and incorporates empirical dependencies on temperature and salt concentration, making it broadly applicable to property prediction tasks across molecular mixtures. Furthermore, we introduce -- to the best of our knowledge -- the first generative machine learning framework for molecular mixture design, demonstrated on electrolyte systems. This framework supports multi-condition-constrained generation, addressing the inherently multi-objective nature of materials design. As a proof of concept, we experimentally identified three liquid electrolytes with both high ionic conductivity and anion-concentrated solvation structure. This unified framework advances data-driven electrolyte design and can be readily extended to other complex chemical systems beyond electrolytes.

All known up to now models of chemical oscillations are based exclusively on kinetic considerations. The chemical gross-process equation is split usually by elementary steps, each step is supplied by an arrow and a differential equation, joint solution to such a construction under certain, often ad hoc chosen conditions and with ad hoc numerical coefficients leads to chemical oscillations. Kinetic perception of chemical oscillations reigns without exclusions. However, as it was recently shown by the author for the laser and for the electrochemical systems, chemical oscillations follow also from solutions to the basic expressions of discrete thermodynamics of chemical equilibria. Graphically those solutions are various fork bifurcation diagrams, and, in certain types of chemical systems, oscillations are well pronounced in the bistable bifurcation areas. In this work we describe a general thermodynamic approach to chemical oscillations as opposite to kinetic models, and depict some of their new features like spontaneity and fractality. The paper doubts exclusivity of the kinetic approach to chemical oscillations, and its aim is to discuss and exemplify thermodynamically predicted chemical oscillations in closed chemical systems.

The transition towards carbon-neutral chemical production is challenging due to the fundamental reliance of the chemical sector on petrochemical feedstocks. Electrolysis-based manufacturing, powered by renewables, is a rapidly evolving technology that might be capable of drastically reducing CO2 emissions from the chemical sector. However, will it be possible to scale up electrolysis systems to the extent necessary to entirely decarbonize all chemical plants? Applying a forward-looking scenario, this perspective estimates how much energy will be needed to power full-scale electrolysis based chemical manufacturing by 2050. A significant gap is identified between the currently planned renewable energy expansion and the energy input necessary to electrify the chemical production: at minimum, the energy required for production of hydrogen and electrolysis of CO2 corresponds to > 50% of all renewable energy that is planned to be available. To cover this gap, strategies enabling a meaningful reduction of the energy input to electrolysis are being discussed from the perspective of both a single electrolysis system and an integrated electro-plant. Several scale-up oriented research priorities are formulated to underpin timely development and commercial availability of described technologies, as well as to explore synergies and support further growth of the renewable energy sector, essential to realize described paradigm shift in chemical manufacturing.

Scalable and cost-effective solutions to renewable energy storage are essential to addressing the world's rising energy needs while reducing climate change. As we increase our reliance on renewable energy sources such as wind and solar, which produce intermittent power, storage is needed to transfer power from times of peak generation to peak demand. This may require the storage of power for hours, days, or months. One solution that offers the potential of scaling to nation-sized grids is the conversion of renewable energy to other fuels, such as hydrogen or methane. To be widely adopted, this process requires cost-effective solutions to running electrochemical reactions. An open challenge is finding low-cost electrocatalysts to drive these reactions at high rates. Through the use of quantum mechanical simulations (density functional theory), new catalyst structures can be tested and evaluated. Unfortunately, the high computational cost of these simulations limits the number of structures that may be tested. The use of machine learning may provide a method to efficiently approximate these calculations, leading to new approaches in finding effective electrocatalysts. In this paper, we provide an introduction to the challenges in finding suitable electrocatalysts, how machine learning may be applied to the problem, and the use of the Open Catalyst Project OC20 dataset for model training.

Continuous solid electrolyte interface (SEI) formation remains the limiting factor of the lifetime of silicon nanoparticles (SiNPs) based negative electrodes. Methods that could provide clear diagnosis of the electrode degradation are of utmost necessity to streamline further developments. We demonstrate that electron energy-loss spectroscopy (EELS) in a scanning transmission electron microscope (STEM) can be used to quickly map SEI components and quantify LixSi alloys from single experiments, with resolutions down to 5 nm. Exploiting the low-loss part of the EEL spectrum allowed us to circumvent the degradation phenomena that have so far crippled the application of this technique on such beam-sensitive compounds. Our results provide unprecedented insight into silicon aging mechanisms in full cell configuration. We observe the morphology of the SEI to be extremely heterogeneous at the particle scale but with clear chemical evolutions with extended cycling coming from both SEI accumulation and a transition from lithium-rich carbonate-like compounds to lithium-poor ones. Thanks to the retrieval of several results from a single dataset, we were able to correlate local discrepancies in lithiation to the initial crystallinity of silicon as well as to the local SEI chemistry and morphology. This study emphasizes how initial heterogeneities in the percolating electronic network and the porosity affect SiNPs aggregates along cycling. These findings pinpoint the crucial role of an optimized formulation in silicon-based thick electrodes.

Classical theories of chemical kinetics assume independent reactions in dilute solutions, whose rates are determined by mean concentrations. In condensed matter, strong interactions alter chemical activities and create inhomogeneities that can dramatically affect the reaction rate. The extreme case is that of a reaction coupled to a phase transformation, whose kinetics must depend on the order parameter -- and its gradients, at phase boundaries. This Account presents a general theory of chemical kinetics based on nonequilibrium thermodynamics. The reaction rate is a nonlinear function of the thermodynamic driving force (free energy of reaction) expressed in terms of variational chemical potentials. The Cahn-Hilliard and Allen-Cahn equations are unified and extended via a master equation for non-equilibrium chemical thermodynamics. For electrochemistry, both Marcus and Butler-Volmer kinetics are generalized for concentrated solutions and ionic solids. The theory is applied to intercalation dynamics in the phase separating Li-ion battery material Li_xFePO_4.

Facing with grave climate change and enormous energy demand, catalyzer gets more and more important due to its significant effect on reducing fossil fuels consumption. Hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) by water splitting are feasible ways to produce clean sustainable energy. Here we systematically explored atomic structures and related STM images of Se defects in PtSe2. The equilibrium fractions of vacancies under variable conditions were detailly predicted. Besides, we found the vacancies are highly kinetic stable, without recovering or aggregation. The Se vacancies in PtSe2 can dramatically enhance the HER performance, comparing with, even better than Pt(111). Beyond, we firstly revealed that PtSe2 monolayer with Se vacancies is also a good OER catalyst. The excellent bipolar catalysis of Se vacancies were further confirmed by experimental measurements. We produced defective PtSe2 by direct selenization of Pt foil at 773 K using a CVD process. Then we observed the HER and OER performance of defective PtSe2 is much highly efficient than Pt foils by a series of measurements. Our work with compelling theoretical and experimental studies indicates PtSe2 with Se defects is an ideal bipolar candidate for HER and OER.

We prepared Na_xTO_2 (T = Mn, Co) nanostructures to use as cathode material in Na-ion batteries. The Rietveld refinement of x-ray diffraction data confirms the hexagonal symmetry. Scanning and transmission electron microscopy measurements show hexagonal and rod-shape morphology for T = Co and Mn, respectively. The magnetic measurements indicate the presence of variable oxidation states of Mn/Co ions, but no long range ordering till 5~K. We find that the Na_{0.6}MnO_2 is highly insulating whereas Na_{0.7}CoO_2 is semiconducting in nature. The conduction in Na_{0.7}CoO_2 takes place through both variable range hopping (VRH) as well as activation mechanisms in different temperature ranges. However, for Na_{0.6}MnO_2 the VRH prevails at elevated temperatures. Furthermore, the coin cells have been fabricated and tested the electrochemical behavior using cyclic voltammetry, which confirms the reversibility of Na--ions during intercalation/de-intercalation.

We present a vector-based method to balance chemical reactions. The algorithm builds candidates in a deterministic way, removes duplicates, and always prints coefficients in the lowest whole-number form. For redox cases, electrons and protons/hydroxide are treated explicitly, so both mass and charge are balanced. We also outline the basic principles of the vector formulation of stoichiometry, interpreting reactions as integer vectors in composition space, this geometric view supports compact visualizations of reagent-product interactions and helps surface distinct reaction families. The method enumerates valid balances for arbitrary user-specified species lists without special-case balancing rules or symbolic tricks, and it provides a clean foundation for developing new algorithmic variants (e.g., alternative objectives or constraints). On representative examples (neutralization, double displacement, decomposition, classical redox, small multicomponent sets) and a negative control, the method produced correct integer balances. When multiple balances exist, we report a canonical one - minimizing the total coefficient sum with a simple tie-breaker - without claiming global optimality beyond the solutions the search enumerates. The procedure applies per reaction and extends to reaction networks via consistent per-reaction application. We do not report runtimes, broader benchmarking and code/data release are planned.

This lecture presents an overview of the basic concepts and fundamentals of Engineering Materials within the framework of accelerator applications. After a short introduction, main concepts relative to the structure of matter are reviewed, like crystalline structures, defects and dislocations, phase diagrams and transformations. The microscopic description is correlated with physical properties of materials, focusing in metallurgical aspects like deformation and strengthening. Main groups of materials are addressed and described, namely, metals and alloys, ceramics, polymers, composite materials, and advanced materials, where brush-strokes of tangible applications in particle accelerators and detectors are given. Deterioration aspects of materials are also presented, like corrosion in metals and degradation in plastics.

The prediction of material degradation is an important problem to solve in many industries. Environmental conditions, such as humidity and temperature, are important drivers of degradation processes, with corrosion being one of the most prominent ones. Quantum machine learning is a promising research field but suffers from well known deficits such as barren plateaus and measurement overheads. To address this problem, recent research has examined quantum reservoir computing to address time-series prediction tasks. Although a promising idea, developing circuits that are expressive enough while respecting the limited depths available on current devices is challenging. In classical reservoir computing, the onion echo state network model (ESN) [https://doi.org/10.1007/978-3-031-72359-9_9] was introduced to increase the interpretability of the representation structure of the embeddings. This onion ESN model utilizes a concatenation of smaller reservoirs that describe different time scales by covering different regions of the eigenvalue spectrum. Here, we use the same idea in the realm of quantum reservoir computing by simultaneously evolving smaller quantum reservoirs to better capture all the relevant time-scales while keeping the circuit depth small. We do this by modifying the rotation angles which we show alters the eigenvalues of the quantum evolution, but also note that modifying the number of mid-circuit measurements accomplishes the same goals of changing the long-term or short-term memory. This onion QRC outperforms a simple model and a single classical reservoir for predicting the degradation of aluminum alloys in different environmental conditions. By combining the onion QRC with an additional classical reservoir layer, the prediction accuracy is further improved.

The development of machine learning models for electrocatalysts requires a broad set of training data to enable their use across a wide variety of materials. One class of materials that currently lacks sufficient training data is oxides, which are critical for the development of OER catalysts. To address this, we developed the OC22 dataset, consisting of 62,331 DFT relaxations (~9,854,504 single point calculations) across a range of oxide materials, coverages, and adsorbates. We define generalized total energy tasks that enable property prediction beyond adsorption energies; we test baseline performance of several graph neural networks; and we provide pre-defined dataset splits to establish clear benchmarks for future efforts. In the most general task, GemNet-OC sees a ~36% improvement in energy predictions when combining the chemically dissimilar OC20 and OC22 datasets via fine-tuning. Similarly, we achieved a ~19% improvement in total energy predictions on OC20 and a ~9% improvement in force predictions in OC22 when using joint training. We demonstrate the practical utility of a top performing model by capturing literature adsorption energies and important OER scaling relationships. We expect OC22 to provide an important benchmark for models seeking to incorporate intricate long-range electrostatic and magnetic interactions in oxide surfaces. Dataset and baseline models are open sourced, and a public leaderboard is available to encourage continued community developments on the total energy tasks and data.