Daily Papers

We propose a one-step constrained (OSC) beam search to accelerate recurrent neural network (RNN) transducer (RNN-T) inference. The original RNN-T beam search has a while-loop leading to speed down of the decoding process. The OSC beam search eliminates this while-loop by vectorizing multiple hypotheses. This vectorization is nontrivial as the expansion of the hypotheses within the original RNN-T beam search can be different from each other. However, we found that the hypotheses expanded only once at each decoding step in most cases; thus, we constrained the maximum expansion number to one, thereby allowing vectorization of the hypotheses. For further acceleration, we assign constraints to the prefixes of the hypotheses to prune the redundant search space. In addition, OSC beam search has duplication check among hypotheses during the decoding process as duplication can undesirably shrink the search space. We achieved significant speedup compared with other RNN-T beam search methods with lower phoneme and word error rate.

The rapidly increasing computational cost of pretraining Large Language Models necessitates more efficient approaches. Numerous computational costs have been invested in existing well-trained checkpoints, but many of them remain underutilized due to engineering constraints or limited model capacity. To efficiently reuse this "sunk" cost, we propose to recycle pretrained checkpoints by expanding their parameter counts and continuing training. We propose orthogonal growth method well-suited for converged Mixture-of-Experts model: interpositional layer copying for depth growth and expert duplication with injected noise for width growth. To determine the optimal timing for such growth across checkpoints sequences, we perform comprehensive scaling experiments revealing that the final accuracy has a strong positive correlation with the amount of sunk cost, indicating that greater prior investment leads to better performance. We scale our approach to models with 70B parameters and over 1T training tokens, achieving 10.66% accuracy gain over training from scratch under the same additional compute budget. Our checkpoint recycling approach establishes a foundation for economically efficient large language model pretraining.

Mixture-of-Experts (MoE) has become the dominant architecture for scaling large language models: frontier models routinely decouple total parameters from per-token computation through sparse expert routing. Scaling laws show that under fixed active computation, model quality scales predictably with total parameters, and MoEs realize this by increasing expert count. However, training large MoEs is expensive, as memory requirements and inter-device communication both scale with total parameter count. We propose expert upcycling, a method for progressively expanding MoE capacity by increasing the number of experts during continued pre-training (CPT). Given a trained E-expert model, the upcycling operator constructs an mE-expert model through expert duplication and router extension while holding top-K routing fixed, preserving per-token inference cost. Duplication provides a warm initialization: the expanded model inherits the source checkpoint's learned representations, starting from a substantially lower loss than random initialization. Subsequent CPT then breaks the symmetry among duplicated experts to drive specialization. We formalize the upcycling operator and develop a theoretical framework decomposing the quality gap into a capacity term and an initialization term. We further introduce utility-based expert selection, which uses gradient-based importance scores to guide non-uniform duplication, more than tripling gap closure when CPT is limited. In our 7B-13B total parameter experiments, the upcycled model matches the fixed-size baseline on validation loss while saving 32% of GPU hours. Comprehensive ablations across model scales, activation ratios, MoE architectures, and training budgets yield a practical recipe for deploying expert upcycling, establishing it as a principled, compute-efficient alternative to training large MoE models from scratch.

Generative models, such as DALL-E, Midjourney, and Stable Diffusion, have societal implications that extend beyond the field of computer science. These models require large image databases like LAION-2B, which contain two billion images. At this scale, manual inspection is difficult and automated analysis is challenging. In addition, recent studies show that duplicated images pose copyright problems for models trained on LAION2B, which hinders its usability. This paper proposes an algorithmic chain that runs with modest compute, that compresses CLIP features to enable efficient duplicate detection, even for vast image volumes. Our approach demonstrates that roughly 700 million images, or about 30\%, of LAION-2B's images are likely duplicated. Our method also provides the histograms of duplication on this dataset, which we use to reveal more examples of verbatim copies by Stable Diffusion and further justify the approach. The current version of the de-duplicated set will be distributed online.

The effectiveness of large language models (LLMs) is often hindered by duplicated data in their extensive pre-training datasets. Current approaches primarily focus on detecting and removing duplicates, which risks the loss of valuable information and neglects the varying degrees of duplication. To address this, we propose a soft deduplication method that maintains dataset integrity while selectively reducing the sampling weight of data with high commonness. Central to our approach is the concept of "data commonness", a metric we introduce to quantify the degree of duplication by measuring the occurrence probabilities of samples using an n-gram model. Empirical analysis shows that this method significantly improves training efficiency, achieving comparable perplexity scores with at least a 26% reduction in required training steps. Additionally, it enhances average few-shot downstream accuracy by 1.77% when trained for an equivalent duration. Importantly, this approach consistently improves performance, even on rigorously deduplicated datasets, indicating its potential to complement existing methods and become a standard pre-training process for LLMs.

The exercise of detecting similar bug reports in bug tracking systems is known as duplicate bug report detection. Having prior knowledge of a bug report's existence reduces efforts put into debugging problems and identifying the root cause. Rule and Query-based solutions recommend a long list of potential similar bug reports with no clear ranking. In addition, triage engineers are less motivated to spend time going through an extensive list. Consequently, this deters the use of duplicate bug report retrieval solutions. In this paper, we have proposed a solution using a combination of NLP techniques. Our approach considers unstructured and structured attributes of a bug report like summary, description and severity, impacted products, platforms, categories, etc. It uses a custom data transformer, a deep neural network, and a non-generalizing machine learning method to retrieve existing identical bug reports. We have performed numerous experiments with significant data sources containing thousands of bug reports and showcased that the proposed solution achieves a high retrieval accuracy of 70% for recall@5.

We find that existing language modeling datasets contain many near-duplicate examples and long repetitive substrings. As a result, over 1% of the unprompted output of language models trained on these datasets is copied verbatim from the training data. We develop two tools that allow us to deduplicate training datasets -- for example removing from C4 a single 61 word English sentence that is repeated over 60,000 times. Deduplication allows us to train models that emit memorized text ten times less frequently and require fewer train steps to achieve the same or better accuracy. We can also reduce train-test overlap, which affects over 4% of the validation set of standard datasets, thus allowing for more accurate evaluation. We release code for reproducing our work and performing dataset deduplication at https://github.com/google-research/deduplicate-text-datasets.

Code clone detection is a critical task in software engineering, aimed at identifying duplicated or similar code fragments within or across software systems. Traditional methods often fail to capture functional equivalence, particularly for semantic clones (Type 4), where code fragments implement identical functionality despite differing syntactic structures. Recent advances in large language models (LLMs) have shown promise in understanding code semantics. However, directly applying LLMs to code clone detection yields suboptimal results due to their sensitivity to syntactic differences. To address these challenges, we propose a novel two-stage framework that combines LLM-based screening with execution-based validation for detecting semantic clones in Python programs. In the first stage, an LLM evaluates code pairs to filter out obvious non-clones based on semantic analysis. For pairs not identified as clones, the second stage employs an execution-based validation approach, utilizing LLM-generated test inputs to assess functional equivalence through cross-execution validation. Our experimental evaluation demonstrates significant improvements in precision, recall, and F1-score compared to direct LLM-based detection, highlighting the framework's effectiveness in identifying semantic clones. Future work includes exploring cross-language clone detection and optimizing the framework for large-scale applications.

In Open Source Software, the source code and any other resources available in a project can be viewed or reused by anyone subject to often permissive licensing restrictions. In contrast to some studies of dependency-based reuse supported via package managers, no studies of OSS-wide copy-based reuse exist. This dataset seeks to encourage the studies of OSS-wide copy-based reuse by providing copying activity data that captures whole-file reuse in nearly all OSS. To accomplish that, we develop approaches to detect copy-based reuse by developing an efficient algorithm that exploits World of Code infrastructure: a curated and cross referenced collection of nearly all open source repositories. We expect this data to enable future research and tool development that support such reuse and minimize associated risks.

Community Question Answering (CQA) in different domains is growing at a large scale because of the availability of several platforms and huge shareable information among users. With the rapid growth of such online platforms, a massive amount of archived data makes it difficult for moderators to retrieve possible duplicates for a new question and identify and confirm existing question pairs as duplicates at the right time. This problem is even more critical in CQAs corresponding to large software systems like askubuntu where moderators need to be experts to comprehend something as a duplicate. Note that the prime challenge in such CQA platforms is that the moderators are themselves experts and are therefore usually extremely busy with their time being extraordinarily expensive. To facilitate the task of the moderators, in this work, we have tackled two significant issues for the askubuntu CQA platform: (1) retrieval of duplicate questions given a new question and (2) duplicate question confirmation time prediction. In the first task, we focus on retrieving duplicate questions from a question pool for a particular newly posted question. In the second task, we solve a regression problem to rank a pair of questions that could potentially take a long time to get confirmed as duplicates. For duplicate question retrieval, we propose a Siamese neural network based approach by exploiting both text and network-based features, which outperforms several state-of-the-art baseline techniques. Our method outperforms DupPredictor and DUPE by 5% and 7% respectively. For duplicate confirmation time prediction, we have used both the standard machine learning models and neural network along with the text and graph-based features. We obtain Spearman's rank correlation of 0.20 and 0.213 (statistically significant) for text and graph based features respectively.

Code cloning, the duplication of code fragments, is common in software development. While some reuse aids productivity, excessive cloning hurts maintainability and introduces bugs. Hence, automatic code clone detection is vital. Meanwhile, large language models (LLMs) possess diverse code-related knowledge, making them versatile for various software engineering challenges. However, LLMs' performance in code clone detection is unclear and needs more study for accurate assessment. In this paper, we provide the first comprehensive evaluation of LLMs for clone detection, covering different clone types, languages, and prompts. We find advanced LLMs excel in detecting complex semantic clones, surpassing existing methods. Adding intermediate reasoning steps via chain-of-thought prompts noticeably enhances performance. Additionally, representing code as vector embeddings, especially with text encoders, effectively aids clone detection.Lastly, the ability of LLMs to detect code clones differs among various programming languages. Our study suggests that LLMs have potential for clone detection due to their language capabilities, offering insights for developing robust LLM-based methods to enhance software engineering.

This work proposes a new pipeline for leveraging data collected on the Stack Overflow website for pre-training a multimodal model for searching duplicates on question answering websites. Our multimodal model is trained on question descriptions and source codes in multiple programming languages. We design two new learning objectives to improve duplicate detection capabilities. The result of this work is a mature, fine-tuned Multimodal Question Duplicity Detection (MQDD) model, ready to be integrated into a Stack Overflow search system, where it can help users find answers for already answered questions. Alongside the MQDD model, we release two datasets related to the software engineering domain. The first Stack Overflow Dataset (SOD) represents a massive corpus of paired questions and answers. The second Stack Overflow Duplicity Dataset (SODD) contains data for training duplicate detection models.

We present a straightforward statistical test to detect certain violations of the assumption that the data are Independent and Identically Distributed (IID). The specific form of violation considered is common across real-world applications: whether the examples are ordered in the dataset such that almost adjacent examples tend to have more similar feature values (e.g. due to distributional drift, or attractive interactions between datapoints). Based on a k-Nearest Neighbors estimate, our approach can be used to audit any multivariate numeric data as well as other data types (image, text, audio, etc.) that can be numerically represented, perhaps with model embeddings. Compared with existing methods to detect drift or auto-correlation, our approach is both applicable to more types of data and also able to detect a wider variety of IID violations in practice. Code: https://github.com/cleanlab/cleanlab

Code clones are pairs of code snippets that implement similar functionality. Clone detection is a fundamental branch of automatic source code comprehension, having many applications in refactoring recommendation, plagiarism detection, and code summarization. A particularly interesting case of clone detection is the detection of semantic clones, i.e., code snippets that have the same functionality but significantly differ in implementation. A promising approach to detecting semantic clones is contrastive learning (CL), a machine learning paradigm popular in computer vision but not yet commonly adopted for code processing. Our work aims to evaluate the most popular CL algorithms combined with three source code representations on two tasks. The first task is code clone detection, which we evaluate on the POJ-104 dataset containing implementations of 104 algorithms. The second task is plagiarism detection. To evaluate the models on this task, we introduce CodeTransformator, a tool for transforming source code. We use it to create a dataset that mimics plagiarised code based on competitive programming solutions. We trained nine models for both tasks and compared them with six existing approaches, including traditional tools and modern pre-trained neural models. The results of our evaluation show that proposed models perform diversely in each task, however the performance of the graph-based models is generally above the others. Among CL algorithms, SimCLR and SwAV lead to better results, while Moco is the most robust approach. Our code and trained models are available at https://doi.org/10.5281/zenodo.6360627, https://doi.org/10.5281/zenodo.5596345.

Detecting code clones is relevant to software maintenance and code refactoring. This challenge still presents unresolved cases, mainly when structural similarity does not reflect functional equivalence, though recent code models show promise. Therefore, this research aims to systematically measure the performance of several newly introduced small code models in classifying code pairs as clones or non-clones. The evaluation is based on five datasets: BigCloneBench, CodeJam, Karnalim, POJ104, and PoolC, as well as six code models: CodeBERT, GraphCodeBERT, Salesforce T5, UniXCoder, PLBART, and Polycoder. Most models performed well across standard metrics, including accuracy, precision, recall, and F1-score. However, a marginal fraction of clones remains challenging to detect, especially when the code looks similar but performs different operations. The source code that illustrates our approach is available at: https://github.com/jorge-martinez-gil/small-code-models

Assessing similarity in source code has gained significant attention in recent years due to its importance in software engineering tasks such as clone detection and code search and recommendation. This work presents a comparative analysis of unsupervised similarity measures for identifying source code clone detection. The goal is to overview the current state-of-the-art techniques, their strengths, and weaknesses. To do that, we compile the existing unsupervised strategies and evaluate their performance on a benchmark dataset to guide software engineers in selecting appropriate methods for their specific use cases. The source code of this study is available at https://github.com/jorge-martinez-gil/codesim

BigCloneBench is a well-known and widely used large-scale dataset for the evaluation of recall of clone detection tools. It has been beneficial for research on clone detection and has become a standard in evaluating the performance of clone detection tools. More recently, it has also been widely used as a dataset to evaluate machine learning approaches to semantic clone detection or code similarity detection for functional or semantic similarity. This paper demonstrates that BigCloneBench is problematic to use as ground truth for learning or evaluating semantic code similarity, and highlights the aspects of BigCloneBench that affect the ground truth quality. A manual investigation of a statistically significant random sample of 406 Weak Type-3/Type-4 clone pairs revealed that 93% of them do not have a similar functionality and are therefore mislabelled. In a literature review of 179 papers that use BigCloneBench as a dataset, we found 139 papers that used BigCloneBench to evaluate semantic clone detection and where the results are threatened in their validity by the mislabelling. As such, these papers often report high F1 scores (e.g., above 0.9), which indicates overfitting to dataset-specific artefacts rather than genuine semantic similarity detection. We emphasise that using BigCloneBench remains valid for the intended purpose of evaluating syntactic or textual clone detection of Type-1, Type-2, and Type-3 clones. We acknowledge the important contributions of BigCloneBench to two decades of traditional clone detection research. However, the usage of BigCloneBench beyond the intended purpose without careful consideration of its limitations has led to misleading results and conclusions, and potentially harmed the field of semantic clone detection.

Deduplication is a major focus for assembling and curating training datasets for large language models (LLM) -- detecting and eliminating additional instances of the same content -- in large collections of technical documents. Unrestrained, duplicates in the training dataset increase training costs and lead to undesirable properties such as memorization in trained models or cheating on evaluation. Contemporary approaches to document-level deduplication are often extremely expensive in both runtime and memory. We propose LSHBloom, an extension to MinhashLSH, which replaces the expensive LSHIndex with lightweight Bloom filters. LSHBloom demonstrates the same deduplication performance as MinhashLSH with only a marginal increase in false positives (as low as 1e-5 in our experiments); demonstrates competitive runtime (270\% faster than MinhashLSH on peS2o); and, crucially, uses just 0.6\% of the disk space required by MinhashLSH to deduplicate peS2o. We demonstrate that this space advantage scales with increased dataset size -- at the extreme scale of several billion documents, LSHBloom promises a 250\% speedup and a 54times space advantage over traditional MinHashLSH scaling deduplication of text datasets to many billions of documents.

Concerns about reproducibility in artificial intelligence (AI) have emerged, as researchers have reported unsuccessful attempts to directly reproduce published findings in the field. Replicability, the ability to affirm a finding using the same procedures on new data, has not been well studied. In this paper, we examine both reproducibility and replicability of a corpus of 16 papers on table structure recognition (TSR), an AI task aimed at identifying cell locations of tables in digital documents. We attempt to reproduce published results using codes and datasets provided by the original authors. We then examine replicability using a dataset similar to the original as well as a new dataset, GenTSR, consisting of 386 annotated tables extracted from scientific papers. Out of 16 papers studied, we reproduce results consistent with the original in only four. Two of the four papers are identified as replicable using the similar dataset under certain IoU values. No paper is identified as replicable using the new dataset. We offer observations on the causes of irreproducibility and irreplicability. All code and data are available on Codeocean at https://codeocean.com/capsule/6680116/tree.

We consider the clone detection and information retrieval problems for source code, well-known tasks important for any programming language. Although it is also an important and interesting problem to find code snippets that operate identically but are written in different programming languages, to the best of our knowledge multilingual clone detection has not been studied in literature. In this work, we formulate the multilingual clone detection problem and present XCD, a new benchmark dataset produced from the CodeForces submissions dataset. Moreover, we present a novel training procedure, called cross-consistency training (CCT), that we apply to train language models on source code in different programming languages. The resulting CCT-LM model, initialized with GraphCodeBERT and fine-tuned with CCT, achieves new state of the art, outperforming existing approaches on the POJ-104 clone detection benchmark with 95.67\% MAP and AdvTest code search benchmark with 47.18\% MRR; it also shows the best results on the newly created multilingual clone detection benchmark XCD across all programming languages.

Plagiarism detection is well known phenomenon in the academic arena. Copying other people is considered as serious offence that needs to be checked. There are many plagiarism detection systems such as turn-it-in that has been developed to provide this checks. Most, if not all, discard the figures and charts before checking for plagiarism. Discarding the figures and charts results in look holes that people can take advantage. That means people can plagiarized figures and charts easily without the current plagiarism systems detecting it. There are very few papers which talks about flowcharts plagiarism detection. Therefore, there is a need to develop a system that will detect plagiarism in figures and charts. This paper presents a method for detecting flow chart figure plagiarism based on shape-based image processing and multimedia retrieval. The method managed to retrieve flowcharts with ranked similarity according to different matching sets.

Behaviour-Driven Development (BDD) suites accumulate step-text duplication whose maintenance cost is established in prior work. Existing detection techniques require running the tests (Binamungu et al., 2018-2023) or are confined to a single organisation (Irshad et al., 2020-2022), leaving a gap: a purely static, paraphrase-robust, step-level detector usable on any repository. We fill the gap with cukereuse, an open-source Python CLI combining exact hashing, Levenshtein ratio, and sentence-transformer embeddings in a layered pipeline, released alongside an empirical corpus of 347 public GitHub repositories, 23,667 parsed .feature files, and 1,113,616 Gherkin steps. The step-weighted exact-duplicate rate is 80.2 %; the median-repository rate is 58.6 % (Spearman rho = 0.51 with size). The top hybrid cluster groups 20.7k occurrences across 2.2k files. Against 1,020 pairs manually labelled by the three authors under a released rubric (inter-annotator Fleiss' kappa = 0.84 on a 60-pair overlap), we report precision, recall, and F1 with bootstrap 95 % CIs under two protocols: the primary rubric and a score-free second-pass relabelling. The strongest honest pair-level number is near-exact at F1 = 0.822 on score-free labels; the primary-rubric semantic F1 = 0.906 is inflated by a stratification artefact that pins recall at 1.000. Lexical baselines (SourcererCC-style, NiCad-style) reach primary F1 = 0.761 and 0.799. The paper also presents a CDN-structured critique of Gherkin (Cognitive Dimensions of Notations); eight of fourteen dimensions are rated problematic or unsupported. The tool, corpus, labelled pairs, rubric, and pipeline are released under permissive licences.

This paper aims to understand the impacts of various data combinations (e.g., web text, wikipedia, github, books) on the training of large language models using SlimPajama. SlimPajama is a rigorously deduplicated, multi-source dataset, which has been refined and further deduplicated to 627B tokens from the extensive 1.2T tokens RedPajama dataset contributed by Together. We've termed our research as SlimPajama-DC, an empirical analysis designed to uncover fundamental characteristics and best practices associated with employing SlimPajama in the training of large language models. During our research with SlimPajama, two pivotal observations emerged: (1) Global deduplication vs. local deduplication. We analyze and discuss how global (across different sources of datasets) and local (within the single source of dataset) deduplications affect the performance of trained models. (2) Proportions of high-quality/highly-deduplicated multi-source datasets in the combination. To study this, we construct six configurations of SlimPajama dataset and train individual ones using 1.3B Cerebras-GPT model with Alibi and SwiGLU. Our best configuration outperforms the 1.3B model trained on RedPajama using the same number of training tokens by a significant margin. All our 1.3B models are trained on Cerebras 16times CS-2 cluster with a total of 80 PFLOP/s in bf16 mixed precision. We further extend our discoveries (such as increasing data diversity is crucial after global deduplication) on a 7B model with large batch-size training. Our models and the separate SlimPajama-DC datasets are available at: https://huggingface.co/MBZUAI-LLM and https://huggingface.co/datasets/cerebras/SlimPajama-627B.

Many tasks revolve around editing a document, whether code or text. We formulate the revision similarity problem to unify a wide range of machine learning evaluation problems whose goal is to assess a revision to an existing document. We observe that revisions usually change only a small portion of an existing document, so the existing document and its immediate revisions share a majority of their content. We formulate five adequacy criteria for revision similarity measures, designed to align them with human judgement. We show that popular pairwise measures, like BLEU, fail to meet these criteria, because their scores are dominated by the shared content. They report high similarity between two revisions when humans would assess them as quite different. This is a fundamental flaw we address. We propose a novel static measure, Excision Score (ES), which computes longest common subsequence (LCS) to remove content shared by an existing document with the ground truth and predicted revisions, before comparing only the remaining divergent regions. This is analogous to a surgeon creating a sterile field to focus on the work area. We use approximation to speed the standard cubic LCS computation to quadratic. In code-editing evaluation, where static measures are often used as a cheap proxy for passing tests, we demonstrate that ES surpasses existing measures. When aligned with test execution on HumanEvalFix, ES improves over its nearest competitor, SARI, by 12% Pearson correlation and by >21% over standard measures like BLEU. The key criterion is invariance to shared context; when we perturb HumanEvalFix with increased shared context, ES' improvement over SARI increases to 20% and >30% over standard measures. ES also handles other corner cases that other measures do not, such as correctly aligning moved code blocks, and appropriately rewarding matching insertions or deletions.

In this paper, we describe and present the first dataset of source code plagiarism specifically aimed at contest plagiarism. The dataset contains 251 pairs of plagiarized solutions of competitive programming tasks in Java, as well as 660 non-plagiarized ones, however, the described approach can be used to extend the dataset in the future. Importantly, each pair comes in two versions: (a) "raw" and (b) with participants' repeated template code removed, allowing for evaluating tools in different settings. We used the collected dataset to compare the available source code plagiarism detection tools, including state-of-the-art ones, specifically in their ability to detect contest plagiarism. Our results indicate that the tools show significantly worse performance on the contest plagiarism because of the template code and the presence of other misleadingly similar code. Of the tested tools, token-based ones demonstrated the best performance in both variants of the dataset.

In this paper, we present ManyTypes4Py, a large Python dataset for machine learning (ML)-based type inference. The dataset contains a total of 5,382 Python projects with more than 869K type annotations. Duplicate source code files were removed to eliminate the negative effect of the duplication bias. To facilitate training and evaluation of ML models, the dataset was split into training, validation and test sets by files. To extract type information from abstract syntax trees (ASTs), a lightweight static analyzer pipeline is developed and accompanied with the dataset. Using this pipeline, the collected Python projects were analyzed and the results of the AST analysis were stored in JSON-formatted files. The ManyTypes4Py dataset is shared on zenodo and its tools are publicly available on GitHub.

This paper presents a new approach for code similarity on High Level programs. Our technique is based on Fast Dynamic Time Warping, that builds a warp path or points relation with local restrictions. The source code is represented into Time Series using the operators inside programming languages that makes possible the comparison. This makes possible subsequence detection that represent similar code instructions. In contrast with other code similarity algorithms, we do not make features extraction. The experiments show that two source codes are similar when their respective Time Series are similar.

Redundant code is a persistent challenge in software development that makes systems harder to maintain, scale, and update. It adds unnecessary complexity, hinders bug fixes, and increases technical debt. Despite their impact, removing redundant code manually is risky and error-prone, often introducing new bugs or missing dependencies. While studies highlight the prevalence and negative impact of redundant code, little focus has been given to Artificial Intelligence (AI) system codebases and the common patterns that cause redundancy. Additionally, the reasons behind developers unintentionally introducing redundant code remain largely unexplored. This research addresses these gaps by leveraging large language models (LLMs) to automatically detect and optimize redundant code in AI projects. Our research aims to identify recurring patterns of redundancy and analyze their underlying causes, such as outdated practices or insufficient awareness of best coding principles. Additionally, we plan to propose an LLM agent that will facilitate the detection and refactoring of redundancies on a large scale while preserving original functionality. This work advances the application of AI in identifying and optimizing redundant code, ultimately helping developers maintain cleaner, more readable, and scalable codebases.

Image copy detection (ICD) aims to determine whether a query image is an edited copy of any image from a reference set. Currently, there are very limited public benchmarks for ICD, while all overlook a critical challenge in real-world applications, i.e., the distraction from hard negative queries. Specifically, some queries are not edited copies but are inherently similar to some reference images. These hard negative queries are easily false recognized as edited copies, significantly compromising the ICD accuracy. This observation motivates us to build the first ICD benchmark featuring this characteristic. Based on existing ICD datasets, this paper constructs a new dataset by additionally adding 100, 000 and 24, 252 hard negative pairs into the training and test set, respectively. Moreover, this paper further reveals a unique difficulty for solving the hard negative problem in ICD, i.e., there is a fundamental conflict between current metric learning and ICD. This conflict is: the metric learning adopts symmetric distance while the edited copy is an asymmetric (unidirectional) process, e.g., a partial crop is close to its holistic reference image and is an edited copy, while the latter cannot be the edited copy of the former (in spite the distance is equally small). This insight results in an Asymmetrical-Similarity Learning (ASL) method, which allows the similarity in two directions (the query <-> the reference image) to be different from each other. Experimental results show that ASL outperforms state-of-the-art methods by a clear margin, confirming that solving the symmetric-asymmetric conflict is critical for ICD. The NDEC dataset and code are available at https://github.com/WangWenhao0716/ASL.

Code clones are semantically similar code fragments pairs that are syntactically similar or different. Detection of code clones can help to reduce the cost of software maintenance and prevent bugs. Numerous approaches of detecting code clones have been proposed previously, but most of them focus on detecting syntactic clones and do not work well on semantic clones with different syntactic features. To detect semantic clones, researchers have tried to adopt deep learning for code clone detection to automatically learn latent semantic features from data. Especially, to leverage grammar information, several approaches used abstract syntax trees (AST) as input and achieved significant progress on code clone benchmarks in various programming languages. However, these AST-based approaches still can not fully leverage the structural information of code fragments, especially semantic information such as control flow and data flow. To leverage control and data flow information, in this paper, we build a graph representation of programs called flow-augmented abstract syntax tree (FA-AST). We construct FA-AST by augmenting original ASTs with explicit control and data flow edges. Then we apply two different types of graph neural networks (GNN) on FA-AST to measure the similarity of code pairs. As far as we have concerned, we are the first to apply graph neural networks on the domain of code clone detection. We apply our FA-AST and graph neural networks on two Java datasets: Google Code Jam and BigCloneBench. Our approach outperforms the state-of-the-art approaches on both Google Code Jam and BigCloneBench tasks.

A critical part of creating code suggestion systems is the pre-training of Large Language Models on vast amounts of source code and natural language text, often of questionable origin or quality. This may contribute to the presence of bugs and vulnerabilities in code generated by LLMs. While efforts to identify bugs at or after code generation exist, it is preferable to pre-train or fine-tune LLMs on curated, high-quality, and compliant datasets. The need for vast amounts of training data necessitates that such curation be automated, minimizing human intervention. We propose an automated source code autocuration technique that leverages the complete version history of open-source software projects to improve the quality of training data. This approach leverages the version history of all OSS projects to identify training data samples that have been modified or have undergone changes in at least one OSS project, and pinpoint a subset of samples that include fixes for bugs or vulnerabilities. We evaluate this method using The Stack v2 dataset, and find that 17% of the code versions in the dataset have newer versions, with 17% of those representing bug fixes, including 2.36% addressing known CVEs. The deduplicated version of Stack v2 still includes blobs vulnerable to 6,947 known CVEs. Furthermore, 58% of the blobs in the dataset were never modified after creation, suggesting they likely represent software with minimal or no use. Misidentified blob origins present an additional challenge, as they lead to the inclusion of non-permissively licensed code, raising serious compliance concerns. By addressing these issues, the training of new models can avoid perpetuating buggy code patterns or license violations. We expect our results to inspire process improvements for automated data curation, with the potential to enhance the reliability of outputs generated by AI tools.

Jupyter notebooks facilitate the bundling of executable code with its documentation and output in one interactive environment, and they represent a popular mechanism to document and share computational workflows. The reproducibility of computational aspects of research is a key component of scientific reproducibility but has not yet been assessed at scale for Jupyter notebooks associated with biomedical publications. We address computational reproducibility at two levels: First, using fully automated workflows, we analyzed the computational reproducibility of Jupyter notebooks related to publications indexed in PubMed Central. We identified such notebooks by mining the articles full text, locating them on GitHub and re-running them in an environment as close to the original as possible. We documented reproduction success and exceptions and explored relationships between notebook reproducibility and variables related to the notebooks or publications. Second, this study represents a reproducibility attempt in and of itself, using essentially the same methodology twice on PubMed Central over two years. Out of 27271 notebooks from 2660 GitHub repositories associated with 3467 articles, 22578 notebooks were written in Python, including 15817 that had their dependencies declared in standard requirement files and that we attempted to re-run automatically. For 10388 of these, all declared dependencies could be installed successfully, and we re-ran them to assess reproducibility. Of these, 1203 notebooks ran through without any errors, including 879 that produced results identical to those reported in the original notebook and 324 for which our results differed from the originally reported ones. Running the other notebooks resulted in exceptions. We zoom in on common problems, highlight trends and discuss potential improvements to Jupyter-related workflows associated with biomedical publications.

Progress in machine learning has been driven in large part by massive increases in data. However, large web-scale datasets such as LAION are largely uncurated beyond searches for exact duplicates, potentially leaving much redundancy. Here, we introduce SemDeDup, a method which leverages embeddings from pre-trained models to identify and remove semantic duplicates: data pairs which are semantically similar, but not exactly identical. Removing semantic duplicates preserves performance and speeds up learning. Analyzing a subset of LAION, we show that SemDeDup can remove 50% of the data with minimal performance loss, effectively halving training time. Moreover, performance increases out of distribution. Also, analyzing language models trained on C4, a partially curated dataset, we show that SemDeDup improves over prior approaches while providing efficiency gains. SemDeDup provides an example of how simple ways of leveraging quality embeddings can be used to make models learn faster with less data.

In this study, we propose a simple method for fault-tolerant Strassen-like matrix multiplications. The proposed method is based on using two distinct Strassen-like algorithms instead of replicating a given one. We have realized that using two different algorithms, new check relations arise resulting in more local computations. These local computations are found using computer aided search. To improve performance, special parity (extra) sub-matrix multiplications (PSMMs) are generated (two of them) at the expense of increasing communication/computation cost of the system. Our preliminary results demonstrate that the proposed method outperforms a Strassen-like algorithm with two copies and secures a very close performance to three copy version using only 2 PSMMs, reducing the total number of compute nodes by around 24\% i.e., from 21 to 16.

The expanse of information available over the internet makes it difficult to identify whether a specific work is a replica or a duplication of a protected work, especially if we talk about visual representations. Strategies are planned to identify the utilization of the copyrighted image in a report. Still, we want to resolve the issue of involving a copyrighted image in a video and a calculation that could recognize the degree of similarity of the copyrighted picture utilized in the video, even for the pieces of the video that are not featured a lot and in the end perform characterization errands on those edges. Machine learning (ML) and artificial intelligence (AI) are vital to address this problem. Numerous associations have been creating different calculations to screen the identification of copyrighted work. This work means concentrating on those calculations, recognizing designs inside the information, and fabricating a more reasonable model for copyrighted image classification and detection. We have used different algorithms like- Image Processing, Convolutional Neural Networks (CNN), Image hashing, etc. Keywords- Copyright, Artificial Intelligence(AI), Copyrighted Image, Convolutional Neural Network(CNN), Image processing, Degree of similarity, Image Hashing.

Large text corpora are the backbone of language models. However, we have a limited understanding of the content of these corpora, including general statistics, quality, social factors, and inclusion of evaluation data (contamination). In this work, we propose What's In My Big Data? (WIMBD), a platform and a set of sixteen analyses that allow us to reveal and compare the contents of large text corpora. WIMBD builds on two basic capabilities -- count and search -- at scale, which allows us to analyze more than 35 terabytes on a standard compute node. We apply WIMBD to ten different corpora used to train popular language models, including C4, The Pile, and RedPajama. Our analysis uncovers several surprising and previously undocumented findings about these corpora, including the high prevalence of duplicate, synthetic, and low-quality content, personally identifiable information, toxic language, and benchmark contamination. For instance, we find that about 50% of the documents in RedPajama and LAION-2B-en are duplicates. In addition, several datasets used for benchmarking models trained on such corpora are contaminated with respect to important benchmarks, including the Winograd Schema Challenge and parts of GLUE and SuperGLUE. We open-source WIMBD's code and artifacts to provide a standard set of evaluations for new text-based corpora and to encourage more analyses and transparency around them: github.com/allenai/wimbd.

The capability of accurately determining code similarity is crucial in many tasks related to software development. For example, it might be essential to identify code duplicates for performing software maintenance. This research introduces a novel ensemble learning approach for code similarity assessment, combining the strengths of multiple unsupervised similarity measures. The key idea is that the strengths of a diverse set of similarity measures can complement each other and mitigate individual weaknesses, leading to improved performance. Preliminary results show that while Transformers-based CodeBERT and its variant GraphCodeBERT are undoubtedly the best option in the presence of abundant training data, in the case of specific small datasets (up to 500 samples), our ensemble achieves similar results, without prejudice to the interpretability of the resulting solution, and with a much lower associated carbon footprint due to training. The source code of this novel approach can be downloaded from https://github.com/jorge-martinez-gil/ensemble-codesim.

Images produced by diffusion models are increasingly popular in digital artwork and visual marketing. However, such generated images might replicate content from existing ones and pose the challenge of content originality. Existing Image Copy Detection (ICD) models, though accurate in detecting hand-crafted replicas, overlook the challenge from diffusion models. This motivates us to introduce ICDiff, the first ICD specialized for diffusion models. To this end, we construct a Diffusion-Replication (D-Rep) dataset and correspondingly propose a novel deep embedding method. D-Rep uses a state-of-the-art diffusion model (Stable Diffusion V1.5) to generate 40, 000 image-replica pairs, which are manually annotated into 6 replication levels ranging from 0 (no replication) to 5 (total replication). Our method, PDF-Embedding, transforms the replication level of each image-replica pair into a probability density function (PDF) as the supervision signal. The intuition is that the probability of neighboring replication levels should be continuous and smooth. Experimental results show that PDF-Embedding surpasses protocol-driven methods and non-PDF choices on the D-Rep test set. Moreover, by utilizing PDF-Embedding, we find that the replication ratios of well-known diffusion models against an open-source gallery range from 10% to 20%.

Software developers attempt to reproduce software bugs to understand their erroneous behaviours and to fix them. Unfortunately, they often fail to reproduce (or fix) them, which leads to faulty, unreliable software systems. However, to date, only a little research has been done to better understand what makes the software bugs non-reproducible. In this paper, we conduct a multimodal study to better understand the non-reproducibility of software bugs. First, we perform an empirical study using 576 non-reproducible bug reports from two popular software systems (Firefox, Eclipse) and identify 11 key factors that might lead a reported bug to non-reproducibility. Second, we conduct a user study involving 13 professional developers where we investigate how the developers cope with non-reproducible bugs. We found that they either close these bugs or solicit for further information, which involves long deliberations and counter-productive manual searches. Third, we offer several actionable insights on how to avoid non-reproducibility (e.g., false-positive bug report detector) and improve reproducibility of the reported bugs (e.g., sandbox for bug reproduction) by combining our analyses from multiple studies (e.g., empirical study, developer study).

Synthesizing inductive loop invariants is fundamental to automating program verification. In this work, we observe that Large Language Models (such as gpt-3.5 or gpt-4) are capable of synthesizing loop invariants for a class of programs in a 0-shot setting, yet require several samples to generate the correct invariants. This can lead to a large number of calls to a program verifier to establish an invariant. To address this issue, we propose a {\it re-ranking} approach for the generated results of LLMs. We have designed a ranker that can distinguish between correct inductive invariants and incorrect attempts based on the problem definition. The ranker is optimized as a contrastive ranker. Experimental results demonstrate that this re-ranking mechanism significantly improves the ranking of correct invariants among the generated candidates, leading to a notable reduction in the number of calls to a verifier.

The BigCode project is an open-scientific collaboration working on the responsible development of large language models for code. This tech report describes the progress of the collaboration until December 2022, outlining the current state of the Personally Identifiable Information (PII) redaction pipeline, the experiments conducted to de-risk the model architecture, and the experiments investigating better preprocessing methods for the training data. We train 1.1B parameter models on the Java, JavaScript, and Python subsets of The Stack and evaluate them on the MultiPL-E text-to-code benchmark. We find that more aggressive filtering of near-duplicates can further boost performance and, surprisingly, that selecting files from repositories with 5+ GitHub stars deteriorates performance significantly. Our best model outperforms previous open-source multilingual code generation models (InCoder-6.7B and CodeGen-Multi-2.7B) in both left-to-right generation and infilling on the Java, JavaScript, and Python portions of MultiPL-E, despite being a substantially smaller model. All models are released under an OpenRAIL license at https://hf.co/bigcode.

We explore whether Large Language Models (LLMs) are capable of logical reasoning with distorted facts, which we call Deduction under Perturbed Evidence (DUPE). DUPE presents a unique challenge to LLMs since they typically rely on their parameters, which encode mostly accurate information, to reason and make inferences. However, in DUPE, LLMs must reason over manipulated or falsified evidence present in their prompts, which can result in false conclusions that are valid only under the manipulated evidence. Our goal with DUPE is to determine whether LLMs can arrive at these false conclusions and identify whether the dominant factor influencing the deduction process is the encoded data in the parameters or the manipulated evidence in the prompts. To evaluate the DUPE capabilities of LLMs, we create a DUPEd version of the StrategyQA dataset, where facts are manipulated to reverse the answer to the question. Our findings show that even the most advanced GPT models struggle to reason on manipulated facts - showcasing poor DUPE skills - with accuracy dropping by 45% compared to the original dataset. We also investigate prompt settings inspired from student simulation models, which mitigate the accuracy drop to some extent. Our findings have practical implications for understanding the performance of LLMs in real-world applications such as student simulation models that involve reasoning over inaccurate information.

Data contamination, i.e., the presence of test data from downstream tasks in the training data of large language models (LLMs), is a potential major issue in measuring LLMs' real effectiveness on other tasks. We propose a straightforward yet effective method for identifying data contamination within LLMs. At its core, our approach starts by identifying potential contamination at the instance level; using this information, our approach then assesses wider contamination at the partition level. To estimate contamination of individual instances, we employ "guided instruction:" a prompt consisting of the dataset name, partition type, and the random-length initial segment of a reference instance, asking the LLM to complete it. An instance is flagged as contaminated if the LLM's output either exactly or nearly matches the latter segment of the reference. To understand if an entire partition is contaminated, we propose two ideas. The first idea marks a dataset partition as contaminated if the average overlap score with the reference instances (as measured by ROUGE-L or BLEURT) is statistically significantly better with the completions from guided instruction compared to a "general instruction" that does not include the dataset and partition name. The second idea marks a dataset partition as contaminated if a classifier based on GPT-4 with few-shot in-context learning prompt marks multiple generated completions as exact/near-exact matches of the corresponding reference instances. Our best method achieves an accuracy between 92% and 100% in detecting if an LLM is contaminated with seven datasets, containing train and test/validation partitions, when contrasted with manual evaluation by human experts. Further, our findings indicate that GPT-4 is contaminated with AG News, WNLI, and XSum datasets.

Professionals in academia, law, and finance audit their documents because inconsistencies can result in monetary, reputational, and scientific costs. Language models (LMs) have the potential to dramatically speed up this auditing process. To understand their abilities, we introduce a benchmark, FIND (Finding INconsistencies in Documents), where each example is a document with an inconsistency inserted manually by a domain expert. Despite the documents being long, technical, and complex, the best-performing model (gpt-5) recovered 64% of the inserted inconsistencies. Surprisingly, gpt-5 also found undiscovered inconsistencies present in the original documents. For example, on 50 arXiv papers, we judged 136 out of 196 of the model's suggestions to be legitimate inconsistencies missed by the original authors. However, despite these findings, even the best models miss almost half of the inconsistencies in FIND, demonstrating that inconsistency detection is still a challenging task.

Pre-training state-of-the-art large language models (LLMs) requires vast amounts of clean and diverse text data. While the open development of large high-quality English pre-training datasets has seen substantial recent progress, training performant multilingual LLMs remains a challenge, in large part due to the inherent difficulty of tailoring filtering and deduplication pipelines to a large number of languages. In this work, we introduce a new pre-training dataset curation pipeline based on FineWeb that can be automatically adapted to support any language. We extensively ablate our pipeline design choices on a set of nine diverse languages, guided by a set of meaningful and informative evaluation tasks that were chosen through a novel selection process based on measurable criteria. Ultimately, we show that our pipeline can be used to create non-English corpora that produce more performant models than prior datasets. We additionally introduce a straightforward and principled approach to rebalance datasets that takes into consideration both duplication count and quality, providing an additional performance uplift. Finally, we scale our pipeline to over 1000 languages using almost 100 Common Crawl snapshots to produce FineWeb2, a new 20 terabyte (5 billion document) multilingual dataset which we release along with our pipeline, training, and evaluation codebases.

We present SciCoQA, a dataset for detecting discrepancies between scientific publications and their codebases to ensure faithful implementations. We construct SciCoQA from GitHub issues and reproducibility papers, and to scale our dataset, we propose a synthetic data generation method for constructing paper-code discrepancies. We analyze the paper-code discrepancies in detail and propose discrepancy types and categories to better understand the occurring mismatches. In total, our dataset consists of 611 paper-code discrepancies (81 real, 530 synthetic), spanning diverse computational science disciplines, including AI, Physics, Quantitative Biology, and others. Our evaluation of 21 LLMs highlights the difficulty of SciCoQA, particularly for instances involving omitted paper details, long-context inputs, and data outside the models' pre-training corpus. The best performing model in our evaluation, GPT-5, can only detect 45.7\% of real-world paper-code discrepancies.

Context: Jupyter Notebook has emerged as a versatile tool that transforms how researchers, developers, and data scientists conduct and communicate their work. As the adoption of Jupyter notebooks continues to rise, so does the interest from the software engineering research community in improving the software engineering practices for Jupyter notebooks. Objective: The purpose of this study is to analyze trends, gaps, and methodologies used in software engineering research on Jupyter notebooks. Method: We selected 146 relevant publications from the DBLP Computer Science Bibliography up to the end of 2024, following established systematic literature review guidelines. We explored publication trends, categorized them based on software engineering topics, and reported findings based on those topics. Results: The most popular venues for publishing software engineering research on Jupyter notebooks are related to human-computer interaction instead of traditional software engineering venues. Researchers have addressed a wide range of software engineering topics on notebooks, such as code reuse, readability, and execution environment. Although reusability is one of the research topics for Jupyter notebooks, only 64 of the 146 studies can be reused based on their provided URLs. Additionally, most replication packages are not hosted on permanent repositories for long-term availability and adherence to open science principles. Conclusion: Solutions specific to notebooks for software engineering issues, including testing, refactoring, and documentation, are underexplored. Future research opportunities exist in automatic testing frameworks, refactoring clones between notebooks, and generating group documentation for coherent code cells.

Visual counterfeits are increasingly causing an existential conundrum in mainstream media with rapid evolution in neural image synthesis methods. Though detection of such counterfeits has been a taxing problem in the image forensics community, a recent class of forensic detectors -- universal detectors -- are able to surprisingly spot counterfeit images regardless of generator architectures, loss functions, training datasets, and resolutions. This intriguing property suggests the possible existence of transferable forensic features (T-FF) in universal detectors. In this work, we conduct the first analytical study to discover and understand T-FF in universal detectors. Our contributions are 2-fold: 1) We propose a novel forensic feature relevance statistic (FF-RS) to quantify and discover T-FF in universal detectors and, 2) Our qualitative and quantitative investigations uncover an unexpected finding: color is a critical T-FF in universal detectors. Code and models are available at https://keshik6.github.io/transferable-forensic-features/

Various benchmarks have been proposed to assess the performance of large language models (LLMs) in different coding scenarios. We refer to them as code-related benchmarks. However, there are no systematic guidelines by which such a benchmark should be developed to ensure its quality, reliability, and reproducibility. We propose How2Bench, which is comprised of a 55- 55-criteria checklist as a set of guidelines to govern the development of code-related benchmarks comprehensively. Using HOW2BENCH, we profiled 274 benchmarks released within the past decade and found concerning issues. Nearly 70% of the benchmarks did not take measures for data quality assurance; over 10% did not even open source or only partially open source. Many highly cited benchmarks have loopholes, including duplicated samples, incorrect reference codes/tests/prompts, and unremoved sensitive/confidential information. Finally, we conducted a human study involving 49 participants, which revealed significant gaps in awareness of the importance of data quality, reproducibility, and transparency.

Chain of Thought prompting strategy has enhanced the performance of Large Language Models (LLMs) across various NLP tasks. However, it still has shortcomings when dealing with complex reasoning tasks, following~cot_wei, including understanding errors, calculation errors and process errors (e.g. missing-step and hallucinations). Subsequently, Our in-depth analysis of various error types has found that deeply understanding the whole problem is critical in addressing complicated reasoning tasks. In this paper, we proposed a novel prompt strategy called Deeply Understanding the Problems (DUP) prompting, inspired by how humans solve complex reasoning problems, designed to enhance the comprehensive understanding of problems by LLMs. It consists of three stages: 1) extract the core question; 2) find out problem-solving information based on the core question; 3) generate and extract answers by LLMs. We evaluate the performance of DUP prompting on ten diverse reasoning datasets. Experimental results suggest that DUP prompting significantly outperforms Zero-Shot CoT ~kojima2022large across all datasets. Notably, DUP achieves state-of-the-art on SVAMP (90.4\% to 94.2\%) and GSM8K (94.6\% to 97.1\%).

We introduce QualityFlow, a dynamic agentic workflow for program synthesis. Given the English description of a programming problem and a set of unit tests, the model's goal is to synthesize the correct program that solves the problem and passes the tests. QualityFlow includes large language model (LLM) agents resembling a software development team, including code generation, testing, and self-debugging. We propose the LLM Quality Checker, which explicitly "imagines" whether the synthesized programs' execution would conform to the unit tests. The Quality Checks dynamically control the workflow, including actions to submit the final answer, clarify the problem statement, and revert previous workflow steps. Our experiments show that the Quality Checker can precisely accept any correct program, mitigate faulty synthesized tests, and prevent potential workflow deviation. QualityFlow establishes the state-of-the-art results on four program synthesis benchmarks: MBPP, HumanEval, and stricter evaluations from MBPP-EvalPlus and HumanEval-EvalPlus.

Given the rapid ascent of large language models (LLMs), we study the question: (How) can large language models help in reviewing of scientific papers or proposals? We first conduct some pilot studies where we find that (i) GPT-4 outperforms other LLMs (Bard, Vicuna, Koala, Alpaca, LLaMa, Dolly, OpenAssistant, StableLM), and (ii) prompting with a specific question (e.g., to identify errors) outperforms prompting to simply write a review. With these insights, we study the use of LLMs (specifically, GPT-4) for three tasks: 1. Identifying errors: We construct 13 short computer science papers each with a deliberately inserted error, and ask the LLM to check for the correctness of these papers. We observe that the LLM finds errors in 7 of them, spanning both mathematical and conceptual errors. 2. Verifying checklists: We task the LLM to verify 16 closed-ended checklist questions in the respective sections of 15 NeurIPS 2022 papers. We find that across 119 {checklist question, paper} pairs, the LLM had an 86.6% accuracy. 3. Choosing the "better" paper: We generate 10 pairs of abstracts, deliberately designing each pair in such a way that one abstract was clearly superior than the other. The LLM, however, struggled to discern these relatively straightforward distinctions accurately, committing errors in its evaluations for 6 out of the 10 pairs. Based on these experiments, we think that LLMs have a promising use as reviewing assistants for specific reviewing tasks, but not (yet) for complete evaluations of papers or proposals.

Assessing the degree of similarity of code fragments is crucial for ensuring software quality, but it remains challenging due to the need to capture the deeper semantic aspects of code. Traditional syntactic methods often fail to identify these connections. Recent advancements have addressed this challenge, though they frequently sacrifice interpretability. To improve this, we present an approach aiming to improve the transparency of the similarity assessment by using GraphCodeBERT, which enables the identification of semantic relationships between code fragments. This approach identifies similar code fragments and clarifies the reasons behind that identification, helping developers better understand and trust the results. The source code for our implementation is available at https://www.github.com/jorge-martinez-gil/graphcodebert-interpretability.

We consider the task of mapping pseudocode to long programs that are functionally correct. Given test cases as a mechanism to validate programs, we search over the space of possible translations of the pseudocode to find a program that passes the validation. However, without proper credit assignment to localize the sources of program failures, it is difficult to guide search toward more promising programs. We propose to perform credit assignment based on signals from compilation errors, which constitute 88.7% of program failures. Concretely, we treat the translation of each pseudocode line as a discrete portion of the program, and whenever a synthesized program fails to compile, an error localization method tries to identify the portion of the program responsible for the failure. We then focus search over alternative translations of the pseudocode for those portions. For evaluation, we collected the SPoC dataset (Search-based Pseudocode to Code) containing 18,356 programs with human-authored pseudocode and test cases. Under a budget of 100 program compilations, performing search improves the synthesis success rate over using the top-one translation of the pseudocode from 25.6% to 44.7%.

This paper revisits recent code similarity evaluation metrics, particularly focusing on the application of Abstract Syntax Tree (AST) editing distance in diverse programming languages. In particular, we explore the usefulness of these metrics and compare them to traditional sequence similarity metrics. Our experiments showcase the effectiveness of AST editing distance in capturing intricate code structures, revealing a high correlation with established metrics. Furthermore, we explore the strengths and weaknesses of AST editing distance and prompt-based GPT similarity scores in comparison to BLEU score, execution match, and Jaccard Similarity. We propose, optimize, and publish an adaptable metric that demonstrates effectiveness across all tested languages, representing an enhanced version of Tree Similarity of Edit Distance (TSED).

Data is one of the most critical elements in building a large language model. However, existing systems either fail to customize a corpus curation pipeline or neglect to leverage comprehensive corpus assessment for iterative optimization of the curation. To this end, we present a pretraining corpus curation and assessment platform called Oasis -- a one-stop system for data quality improvement and quantification with user-friendly interactive interfaces. Specifically, the interactive modular rule filter module can devise customized rules according to explicit feedback. The debiased neural filter module builds the quality classification dataset in a negative-centric manner to remove the undesired bias. The adaptive document deduplication module could execute large-scale deduplication with limited memory resources. These three parts constitute the customized data curation module. And in the holistic data assessment module, a corpus can be assessed in local and global views, with three evaluation means including human, GPT-4, and heuristic metrics. We exhibit a complete process to use Oasis for the curation and assessment of pretraining data. In addition, an 800GB bilingual corpus curated by Oasis is publicly released.

Software is used in critical applications in our day-to-day life and it is important to ensure its correctness. One popular approach to assess correctness is to evaluate software on tests. If a test fails, it indicates a fault in the software under test; if all tests pass correctly, one may assume that the software is correct. However, the reliability of these results depends on the test suite considered, and there is a risk of false negatives (i.e. software that passes all available tests but contains bugs because some cases are not tested). Therefore, it is important to consider error-inducing test cases when evaluating software. To support data-driven creation of such a test-suite, which is especially of interest for testing software synthesized from large language models, we curate a dataset (Codehacks) of programming problems together with corresponding error-inducing test cases (i.e., "hacks"). This dataset is collected from the wild, in particular, from the Codeforces online judge platform. The dataset comprises 288,617 hacks for 5,578 programming problems, each with a natural language description, as well as the source code for 2,196 submitted solutions to these problems that can be broken with their corresponding hacks. Keywords: competitive programming, language model, dataset

Bug reports provide critical insights into software quality, yet existing datasets often suffer from limited scope, outdated content, or insufficient metadata for machine learning. To address these limitations, we present GitBugs-a comprehensive and up-to-date dataset comprising over 150,000 bug reports from nine actively maintained open-source projects, including Firefox, Cassandra, and VS Code. GitBugs aggregates data from Github, Bugzilla and Jira issue trackers, offering standardized categorical fields for classification tasks and predefined train/test splits for duplicate bug detection. In addition, it includes exploratory analysis notebooks and detailed project-level statistics, such as duplicate rates and resolution times. GitBugs supports various software engineering research tasks, including duplicate detection, retrieval augmented generation, resolution prediction, automated triaging, and temporal analysis. The openly licensed dataset provides a valuable cross-project resource for benchmarking and advancing automated bug report analysis. Access the data and code at https://github.com/av9ash/gitbugs/.

Developers gain productivity by reusing readily available Free and Open Source Software (FOSS) components. Such practices also bring some difficulties, such as managing licensing, components and related security. One approach to handle those difficulties is to use Software Bill of Materials (SBOMs). While there have been studies on the readiness of practitioners to embrace SBOMs and on the SBOM tools ecosystem, a large scale study on SBOM practices based on SBOM files produced in the wild is still lacking. A starting point for such a study is a large dataset of SBOM files found in the wild. We introduce such a dataset, consisting of over 78 thousand unique SBOM files, deduplicated from those found in over 94 million repositories. We include metadata that contains the standard and format used, quality score generated by the tool sbomqs, number of revisions, filenames and provenance information. Finally, we give suggestions and examples of research that could bring new insights on assessing and improving SBOM real practices.

Past work has shown that large language models are susceptible to privacy attacks, where adversaries generate sequences from a trained model and detect which sequences are memorized from the training set. In this work, we show that the success of these attacks is largely due to duplication in commonly used web-scraped training sets. We first show that the rate at which language models regenerate training sequences is superlinearly related to a sequence's count in the training set. For instance, a sequence that is present 10 times in the training data is on average generated ~1000 times more often than a sequence that is present only once. We next show that existing methods for detecting memorized sequences have near-chance accuracy on non-duplicated training sequences. Finally, we find that after applying methods to deduplicate training data, language models are considerably more secure against these types of privacy attacks. Taken together, our results motivate an increased focus on deduplication in privacy-sensitive applications and a reevaluation of the practicality of existing privacy attacks.

Large Language Models (LLMs) play an ever-increasing role in the field of Artificial Intelligence (AI)--not only for natural language processing but also for code understanding and generation. To stimulate open and responsible research on LLMs for code, we introduce The Stack, a 3.1 TB dataset consisting of permissively licensed source code in 30 programming languages. We describe how we collect the full dataset, construct a permissively licensed subset, present a data governance plan, discuss limitations, and show promising results on text2code benchmarks by training 350M-parameter decoders on different Python subsets. We find that (1) near-deduplicating the data significantly boosts performance across all experiments, and (2) it is possible to match previously reported HumanEval and MBPP performance using only permissively licensed data. We make the dataset available at https://hf.co/BigCode, provide a tool called "Am I in The Stack" (https://hf.co/spaces/bigcode/in-the-stack) for developers to search The Stack for copies of their code, and provide a process for code to be removed from the dataset by following the instructions at https://www.bigcode-project.org/docs/about/the-stack/.

We consider the Similarity Sketching problem: Given a universe [u] = {0,ldots, u-1} we want a random function S mapping subsets Asubseteq [u] into vectors S(A) of size t, such that the Jaccard similarity J(A,B) = |Acap B|/|Acup B| between sets A and B is preserved. More precisely, define X_i = [S(A)[i] = S(B)[i]] and X = sum_{iin [t]} X_i. We want E[X_i]=J(A,B), and we want X to be strongly concentrated around E[X] = t cdot J(A,B) (i.e. Chernoff-style bounds). This is a fundamental problem which has found numerous applications in data mining, large-scale classification, computer vision, similarity search, etc. via the classic MinHash algorithm. The vectors S(A) are also called sketches. Strong concentration is critical, for often we want to sketch many sets B_1,ldots,B_n so that we later, for a query set A, can find (one of) the most similar B_i. It is then critical that no B_i looks much more similar to A due to errors in the sketch. The seminal ttimesMinHash algorithm uses t random hash functions h_1,ldots, h_t, and stores left ( min_{ain A} h_1(A),ldots, min_{ain A} h_t(A) right ) as the sketch of A. The main drawback of MinHash is, however, its O(tcdot |A|) running time, and finding a sketch with similar properties and faster running time has been the subject of several papers. (continued...)