Daily Papers

Cavity quantum electrodynamics has been studied as a potential approach to modify free charge carrier generation in donor-acceptor heterojunctions because of the delocalization and controllable energy level properties of hybridized light-matter states known as polaritons. However, in many experimental systems, cavity coupling decreases charge separation. Here, we theoretically study the quantum dynamics of a coherent and dissipative donor-acceptor cavity system, to investigate the dynamical mechanism and further discover the conditions under which polaritons may enhance free charge carrier generation. We use open quantum system methods based on single-pulse pumping to find that polaritons have the potential to connect excitonic states and charge separated states, further enhancing free charge generation on an ultrafast timescale of several hundred femtoseconds. The mechanism involves that polaritons with proper energy levels allow the exciton to overcome the high Coulomb barrier induced by electron-hole attraction. Moreover, we propose that a second-hybridization between a polariton state and dark states with similar energy enables the formation of the hybrid charge separated states that are optically active. These two mechanisms lead to a maximum of 50% enhancement of free charge carrier generation on a short timescale. However, our simulation reveals that on the longer timescale of picoseconds, internal conversion and cavity loss dominate and suppress free charge carrier generation, reproducing the experimental results. Thus, our work shows that polaritons can affect the charge separation mechanism and promote free charge carrier generation efficiency, but predominantly on a short timescale after photoexcitation.

Organic Solar Cells are a promising technology for solving the clean energy crisis in the world. However, generating candidate chemical compounds for solar cells is a time-consuming process requiring thousands of hours of laboratory analysis. For a solar cell, the most important property is the power conversion efficiency which is dependent on the highest occupied molecular orbitals (HOMO) values of the donor molecules. Recently, machine learning techniques have proved to be very useful in building predictive models for HOMO values of donor structures of Organic Photovoltaic Cells (OPVs). Since experimental datasets are limited in size, current machine learning models are trained on data derived from calculations based on density functional theory (DFT). Molecular line notations such as SMILES or InChI are popular input representations for describing the molecular structure of donor molecules. The two types of line representations encode different information, such as SMILES defines the bond types while InChi defines protonation. In this work, we present an ensemble deep neural network architecture, called SINet, which harnesses both the SMILES and InChI molecular representations to predict HOMO values and leverage the potential of transfer learning from a sizeable DFT-computed dataset- Harvard CEP to build more robust predictive models for relatively smaller HOPV datasets. Harvard CEP dataset contains molecular structures and properties for 2.3 million candidate donor structures for OPV while HOPV contains DFT-computed and experimental values of 350 and 243 molecules respectively. Our results demonstrate significant performance improvement from the use of transfer learning and leveraging both molecular representations.

Correlated electron systems are among the centerpieces of modern condensed matter sciences, where many interesting physical phenomena, such as metal-insulator transition and high-Tc superconductivity appear. Recent efforts have been focused on electrostatic doping of such materials to probe the underlying physics without introducing disorder as well as to build field-effect transistors that may complement conventional semiconductor metal-oxide-semiconductor field effect transistor (MOSFET) technology. This review focuses on metal-insulator transition mechanisms in correlated electron materials and three-terminal field effect devices utilizing such correlated oxides as the channel layer. We first describe how electron-disorder interaction, electron-phonon interaction and/or electron correlation in solids could modify the electronic properties of materials and lead to metal-insulator transitions. Then we analyze experimental efforts toward utilizing these transitions in field effect transistors and their underlying principles. It is pointed out that correlated electron systems show promise among these various materials displaying phase transitions for logic technologies. Furthermore, novel phenomena emerging from electronic correlation could enable new functionalities in field effect devices. We then briefly review unconventional electrostatic gating techniques, such as ionic liquid gating and ferroelectric gating, which enables ultra large carrier accumulation density in the correlated materials which could in turn lead to phase transitions. The review concludes with a brief discussion on the prospects and suggestions for future research directions in correlated oxide electronics for information processing.

Advances in research have sparked an increasing curiosity in understanding the plasmonic excitation properties of molecular-scale systems. Polycyclic aromatic hydrocarbons, as the fundamental building blocks of graphene, have been documented to possess plasmonic properties through experimental observations, making them prime candidates for investigation. By doping different elements, the conjugated structure of the molecule can be altered. In this study, the plasmonic excitation properties influenced by conjugated structures in peropyrene and its derivatives are investigated through first-principles calculations that combine the plasmonicity index, generalized plasmonicity index and transition contribution maps. For molecular plasmonic excitation, the conjugated structure can influence the oscillation modes of valence electrons, which is pivotal in yielding distinct field enhancement characteristics. Furthermore, charge doping can lead to a certain degree of alteration in the conjugated structures, and the doping of elements will result in varying degrees of such alteration, thereby initiating different trends in the evolution of plasmonic resonance. This further enhances the tunability of molecular plasmonic resonance. The results provide novel insights into the development and utilization of molecular plasmonic devices in practical applications.

The absorption and fluorescence properties in a class of oligothiophene push-pull biomarkers are investigated with a long-range-corrected (LC) density functional method. Using linear response time-dependent density functional theory (TDDFT), we calculate excitation energies, fluorescence energies, oscillator strengths, and excited-state dipole moments. To benchmark and assess the quality of the LC-TDDFT formalism, an extensive comparison is made between LC-BLYP excitation energies and approximate coupled cluster singles and doubles (CC2) calculations. When using a properly-optimized value of the range parameter, "mu", we find that the LC technique provides an accurate description of charge-transfer excitations as a function of biomarker size and chemical functionalization. In contrast, we find that re-optimizing the fraction of Hartree Fock exchange in conventional hybrid functionals still yields an inconsistent description of excitation energies and oscillator strengths for the two lowest excited states in our series of biomarkers. The results of the present study emphasize the importance of a distance-dependent contribution of exchange in TDDFT for investigating excited-state properties.

Two critical limitations of organic-inorganic lead halide perovskite materials for solar cells are their poor stability in humid environments and inclusion of toxic lead. In this study, high-throughput density functional theory (DFT) methods are used to computationally model and screen 1845 halide perovskites in search of new materials without these limitations that are promising for solar cell applications. This study focuses on finding materials that are comprised of nontoxic elements, stable in a humid operating environment, and have an optimal bandgap for one of single junction, tandem Si-perovskite, or quantum dot-based solar cells. Single junction materials are also screened on predicted single junction photovoltaic (PV) efficiencies exceeding 22.7%, which is the current highest reported PV efficiency for halide perovskites. Generally, these methods qualitatively reproduce the properties of known promising nontoxic halide perovskites that have either been experimentally evaluated or predicted from theory. From a set of 1845 materials, 15 materials pass all screening criteria for single junction cell applications, 13 of which have not been previously investigated, such as (CH3NH3)0.75Cs0.25SnI3, ((NH2)2CH)Ag0.5Sb0.5Br3, CsMn0.875Fe0.125I3, ((CH3)2NH2)Ag0.5Bi0.5I3, and ((NH2)2CH)0.5Rb0.5SnI3. These materials, together with others predicted in this study, may be promising candidate materials for stable, highly efficient, and non-toxic perovskite-based solar cells.

Advances in scaling down heterostructures and having an improved interface quality together with atomically-thin two-dimensional materials suggest a novel approach to systematically design materials. A given material can be transformed through proximity effects whereby it acquires properties of its neighbors, for example, becoming superconducting, magnetic, topologically nontrivial, or with an enhanced spin-orbit coupling. Such proximity effects not only complement the conventional methods of designing materials by doping or functionalization, but can also overcome their various limitations. In proximitized materials it is possible to realize properties that are not present in any constituent region of the considered heterostructure. While the focus is on magnetic and spin-orbit proximity effects with their applications in spintronics, the outlined principles provide also a broader framework for employing other proximity effects to tailor materials and realize novel phenomena.

Atomically thin metallic chains serve as pivotal systems for studying quantum transport, with their conductance strongly linked to the orbital picture. Here, we report a non-monotonic electro-mechanical response in a gold-ferrocene junction, characterized by an unexpected conductance increase over a factor of ten upon stretching. This response is detected in the formation of ferrocene-assisted atomic gold chain in a mechanically controllable break junction at a cryogenic temperature. DFT based calculations show that tilting of molecules inside the chain modifies the orbital overlap and the transmission spectra, leading to such non-monotonic conductance evolution with stretching. This behavior, unlike typical flat conductance plateaus observed in metal atomic chains, pinpoints the unique role of conformational rearrangements during chain elongation. Our findings provide a deeper understanding of the role of orbital hybridization in transport properties and offer new opportunities for designing nanoscale devices with tailored electro-mechanical characteristics.

We simulate the electronic and transport properties of metal/two-dimensional material/metal vertical heterostructures, with a focus on graphene, hexagonal boron nitride and two phases of molybdenum diselenide. Using density functional theory and non-equilibrium Green's function, we assess how stacking configurations and material thickness impact important properties, such as density of states, potential barriers and conductivity. For monolayers, strong orbital hybridization with the metallic electrodes significantly alters the electronic characteristics, with the formation of states within the gap of the semiconducting 2D materials. Trilayers reveal the critical role of interlayer coupling, where the middle layer retains its intrinsic properties, thus influencing the overall conductivity. Our findings highlight the potential for customized multilayer designs to optimize electronic device performance based on two-dimensional materials.

CONSPECTUS: Two-dimensional (2D) compound materials are promising materials for use in electronics, optoelectronics, flexible devices, etc. because they are ultrathin and cover a wide range of properties. Among all methods to prepare 2D materials, chemical vapor deposition (CVD) is promising because it produces materials with a high quality and reasonable cost. So far, much efforts have been made to produce 2D compound materials with large domain size, controllable number of layers, fast-growth rate, and high quality features, etc. However, due to the complicated growth mechanism like sublimation and diffusion processes of multiple precursors, maintaining the controllability, repeatability, and high quality of CVD grown 2D binary and ternary materials is still a big challenge, which prevents their widespread use. Here, taking 2D transition metal dichalcogenides (TMDCs) as examples, we review current progress and highlight some promising growth strategies for the growth of 2D compound materials. The key technology issues which affect the CVD process, including non-metal precursor, metal precursor, substrate engineering, temperature, and gas flow, are discussed. Also, methods in improving the quality of CVD-grown 2D materials and current understanding on their growth mechanism are highlighted. Finally, challenges and opportunities in this field are proposed. We believe this review will guide the future design of controllable CVD systems for the growth of 2D compound materials with good controllability and high quality, laying the foundations for their potential applications.

Elucidating quantum coherence effects and geometrical factors for efficient energy transfer in photosynthesis has the potential to uncover non-classical design principles for advanced organic materials. We study energy transfer in a linear light-harvesting model to reveal that dimerized geometries with strong electronic coherences within donor and acceptor pairs exhibit significantly improved efficiency, which is in marked contrast to predictions of the classical F\"orster theory. We reveal that energy tuning due to coherent delocalization of photoexcitations is mainly responsible for the efficiency optimization. This coherence-assisted energy-tuning mechanism also explains the energetics and chlorophyll arrangements in the widely-studied Fenna-Matthews-Olson complex. We argue that a clustered network with rapid energy relaxation among donors and resonant energy transfer from donor to acceptor states provides a basic formula for constructing efficient light-harvesting systems, and the general principles revealed here can be generalized to larger systems and benefit future innovation of efficient molecular light-harvesting materials.

This paper explores the potential of cryogenic semiconductor computing and superconductor electronics as promising alternatives to traditional semiconductor devices. As semiconductor devices face challenges such as increased leakage currents and reduced performance at higher temperatures, these novel technologies offer high performance and low power computation. Conventional semiconductor electronics operating at cryogenic temperatures (below -150{\deg}C or 123.15 K) can benefit from reduced leakage currents and improved electron mobility. On the other hand, superconductor electronics, operating below 10 K, allow electrons to flow without resistance, offering the potential for ultra-low-power, high-speed computation. This study presents a comprehensive performance modeling and analysis of these technologies and provides insights into their potential benefits and limitations. We implement models of in-order and out-of-order cores operating at high clock frequencies associated with superconductor electronics and cryogenic semiconductor computing in gem5. We evaluate the performance of these components using workloads representative of real-world applications like NPB, SPEC CPU2006, and GAPBS. Our results show the potential speedups achievable by these components and the limitations posed by cache bandwidth. This work provides valuable insights into the performance implications and design trade-offs associated with cryogenic and superconductor technologies, laying the foundation for future research in this field using gem5.

We demonstrate an all solid state semiconductor device, based on epitaxial single crystalline metal halide perovskites, enabling reversible control of a perovskite photoluminescence with a gate voltage. Fundamentally distinct from electroluminescent diodes, such a photoluminescence field effect transistor uses the gate electric field to electrostatically modulate the interfacial density of mobile charges, thereby affecting the radiative and nonradiative recombination channels of photocarriers. Varying the gate voltage in such transistors efficiently changes the rate of nonradiative interfacial recombination and modulates the photoluminescence intensity by 65 to 98 percent (depending on temperature). At favorable gating, nearly complete elimination of non-radiative losses can be achieved. This functionality, coupled with the strong visible-range absorption and emission, possible due to the high absorption coefficient, as well as controllable thickness and macroscopically homogeneous morphology of epitaxial perovskite films, leads to high external photoluminescence quantum efficiencies realized in large-area, thin-film devices. Such high-efficiency, scalable, electrostatically tunable optoelectronic switches broaden the potential applications of metal-halide perovskites in photonics and optoelectronics.

In the context of quantum thermodynamics, quantum batteries have emerged as promising devices for energy storage and manipulation. Over the past decade, substantial progress has been made in understanding the fundamental properties of quantum batteries, with several experimental implementations showing great promise. This Perspective provides an overview of the solid-state materials platforms that could lead to fully operational quantum batteries. After briefly introducing the basic features of quantum batteries, we discuss organic microcavities, where superextensive charging has already been demonstrated experimentally. We then explore other materials, including inorganic nanostructures (such as quantum wells and dots), perovskite systems, and (normal and high-temperature) superconductors. Key achievements in these areas, relevant to the experimental realization of quantum batteries, are highlighted. We also address challenges and future research directions. Despite their enormous potential for energy storage devices, research into advanced materials for quantum batteries is still in its infancy. This paper aims to stimulate interdisciplinarity and convergence among different materials science research communities to accelerate the development of new materials and device architectures for quantum batteries.

The discovery of next-generation photoinitiators for two-photon polymerization (TPP) is hindered by the absence of large, open datasets containing the quantum-chemical and photophysical properties required to model photodissociation and excited-state behavior. Existing molecular datasets typically provide only basic physicochemical descriptors and therefore cannot support data-driven screening or AI-assisted design of photoinitiators. To address this gap, we introduce QuantumChem-200K, a large-scale dataset of over 200,000 organic molecules annotated with eleven quantum-chemical properties, including two-photon absorption (TPA) cross sections, TPA spectral ranges, singlet-triplet intersystem crossing (ISC) energies, toxicity and synthetic accessibility scores, hydrophilicity, solubility, boiling point, molecular weight, and aromaticity. These values are computed using a hybrid workflow that integrates density function theory (DFT), semi-empirical excited-state methods, atomistic quantum solvers, and neural-network predictors. Using QuantumChem-200K, we fine tune the open-source Qwen2.5-32B large language model to create a chemistry AI assistant capable of forward property prediction from SMILES. Benchmarking on 3000 unseen molecules from VQM24 and ZINC20 demonstrates that domain-specific fine-tuning significantly improves accuracy over GPT-4o, Llama-3.1-70B, and the base Qwen2.5-32B model, particularly for TPA and ISC predictions central to photoinitiator design. QuantumChem-200K and the corresponding AI assistant together provide the first scalable platform for high-throughput, LLM-driven photoinitiator screening and accelerated discovery of photosensitive materials.

Two-dimensional (2D) materials are among the most promising candidates for next-generation electronics due to their atomic thinness, allowing for flexible transparent electronics and ultimate length scaling. Thus far, atomically-thin p-n junctions, metal-semiconductor contacts, and metal-insulator barriers have been demonstrated. While 2D materials achieve the thinnest possible devices, precise nanoscale control over the lateral dimensions is also necessary. Here, we report the direct synthesis of sub-nanometer-wide 1D MoS2 channels embedded within WSe2 monolayers, using a dislocation-catalyzed approach. The 1D channels have edges free of misfit dislocations and dangling bonds, forming a coherent interface with the embedding 2D matrix. Periodic dislocation arrays produce 2D superlattices of coherent MoS2 1D channels in WSe2. Using molecular dynamics simulations, we have identified other combinations of 2D materials where 1D channels can also be formed. The electronic band structure of these 1D channels offer the promise of carrier confinement in a direct-gap material and charge separation needed to access the ultimate length scales necessary for future electronic applications.

We numerically study excitation transfer in an artificial LH1-RC complex -- an N-site donor ring coupled to a central acceptor -- driven by a narrowband optical mode and evolved under a Lindblad master equation with loss and dephasing. In the absence of disorder, the light-driven system exhibits a tall, narrow on-resonance efficiency peak (near unity for our parameters); dephasing lowers and narrows this peak without shifting its position. Off resonance, the efficiency shows environmentally assisted transport with a clear non-monotonic dependence on dephasing and a finite optimum. Under static disorder, two regimes emerge: photon-ring coupling and diagonal energetic disorder mix the drive into dark ring modes, activate dissipative channels, and depress efficiency over a detuning window, whereas intra-ring coupling disorder has a much smaller impact in the tested range; increasing the intra-ring coupling g moves dark-mode crossings away from the operating detuning and restores near-peak performance. In the ordered, symmetric, single-excitation, narrowband limit we analytically derive closed-form transfer efficiencies by projecting onto the k{=}0 bright mode and solving the photon--bright mode--acceptor trimer via a Laplace/linear-algebra (determinant) formula; these expressions include a probability-conservation identity eta + sum_k L_k = 1 that benchmarks the simulations and quantitatively predicts the resonant line shape and its dephasing-induced narrowing. A minimal ring toy model further reproduces coherent trapping and its relief by moderate dephasing (ENAQT). These analytics are exact in the ordered limit and serve as mechanistic guides outside this limit, yielding practical design rules for robust, bio-inspired light-harvesting devices.

Despite the variety of available computational approaches, state-of-the-art methods for calculating excitation energies such as time-dependent density functional theory (TDDFT), are computationally demanding and thus limited to moderate system sizes. Here, we introduce a new variation of constrained DFT (CDFT), wherein the constraint corresponds to a particular transition (T), or combination of transitions, between occupied and virtual orbitals, rather than a region of the simulation space as in traditional CDFT. We compare T-CDFT with TDDFT and DeltaSCF results for the low lying excited states (S_{1} and T_{1}) of a set of gas phase acene molecules and OLED emitters, as well as with reference results from the literature. At the PBE level of theory, T-CDFT outperforms DeltaSCF for both classes of molecules, while also proving to be more robust. For the local excitations seen in the acenes, T-CDFT and TDDFT perform equally well. For the charge-transfer (CT)-like excitations seen in the OLED molecules, T-CDFT also performs well, in contrast to the severe energy underestimation seen with TDDFT. In other words, T-CDFT is equally applicable to both local excitations and CT states, providing more reliable excitation energies at a much lower computational cost than TDDFT. T-CDFT is designed for large systems and has been implemented in the linear scaling BigDFT code. It is therefore ideally suited for exploring the effects of explicit environments on excitation energies, paving the way for future simulations of excited states in complex realistic morphologies, such as those which occur in OLED materials.

Hybrid superconductor-semiconductor systems have received a great deal of attention in the last few years because of their potential for quantum engineering, including novel qubits and topological devices. The proximity effect, the process by which the semiconductor inherits superconducting correlations, is an essential physical mechanism of such hybrids. Recent experiments have demonstrated the proximity effect in hole-based semiconductors, but, in contrast to electrons, the precise mechanism by which the hole bands acquire superconducting correlations remains an open question. In addition, hole spins exhibit a complex strong spin-orbit interaction, with largely anisotropic responses to electric and magnetic fields, further motivating the importance of understanding the interplay between such effects and the proximity effect. In this work, we analyze this physics with focus on germanium-based two-dimensional gases. Specifically, we develop an effective theory supported by full numerics, allowing us to extract various analytical expressions and predict different types of superconducting correlations including non-standard forms of singlet and triplet pairing mechanisms with non-trivial momentum dependence; as well as different Zeeman and Rashba spin-orbit contributions. This, together with their precise dependence on electric and magnetic fields, allows us to make specific experimental predictions, including the emergence of f-type superconductivity, Bogoliubov Fermi surfaces, and gapless regimes caused by large in-plane magnetic fields.

Over the past two decades, 2D materials have rapidly evolved into a diverse and expanding family of material platforms. Many members of this materials class have demonstrated their potential to deliver transformative impact on fundamental research and technological applications across different fields. In this roadmap, we provide an overview of the key aspects of 2D material research and development, spanning synthesis, properties and commercial applications. We specifically present roadmaps for high impact 2D materials, including graphene and its derivatives, transition metal dichalcogenides, MXenes as well as their heterostructures and moiré systems. The discussions are organized into thematic sections covering emerging research areas (e.g., twisted electronics, moiré nano-optoelectronics, polaritronics, quantum photonics, and neuromorphic computing), breakthrough applications in key technologies (e.g., 2D transistors, energy storage, electrocatalysis, filtration and separation, thermal management, flexible electronics, sensing, electromagnetic interference shielding, and composites) and other important topics (computational discovery of novel materials, commercialization and standardization). This roadmap focuses on the current research landscape, future challenges and scientific and technological advances required to address, with the intent to provide useful references for promoting the development of 2D materials.

Mesogenic materials, quinoxaline derivatives with semi-flexible cores, are reported to form new type of 3D columnar structure with large crystallographic unit cell and Fddd symmetry below columnar hexagonal phase. The 3D columnar structure is a result of frustration imposed by arrangement of helical columns of opposite chirality into triangular lattice. The studied materials exhibit fluorescent properties that could be easily tuned by modification of molecular structure, compounds with the extended {\pi} electron conjugated systems form aggregates and fluorescence is quenched. For molecules with flexible structure the fluorescence quantum yield reaches 25%. On the other hand, compounds with more rigid mesogenic core, for which fluorescence is suppressed show strong hole photocurrent. For some materials also bi-polar: hole and electron transfer was observed.

Continuous solid electrolyte interface (SEI) formation remains the limiting factor of the lifetime of silicon nanoparticles (SiNPs) based negative electrodes. Methods that could provide clear diagnosis of the electrode degradation are of utmost necessity to streamline further developments. We demonstrate that electron energy-loss spectroscopy (EELS) in a scanning transmission electron microscope (STEM) can be used to quickly map SEI components and quantify LixSi alloys from single experiments, with resolutions down to 5 nm. Exploiting the low-loss part of the EEL spectrum allowed us to circumvent the degradation phenomena that have so far crippled the application of this technique on such beam-sensitive compounds. Our results provide unprecedented insight into silicon aging mechanisms in full cell configuration. We observe the morphology of the SEI to be extremely heterogeneous at the particle scale but with clear chemical evolutions with extended cycling coming from both SEI accumulation and a transition from lithium-rich carbonate-like compounds to lithium-poor ones. Thanks to the retrieval of several results from a single dataset, we were able to correlate local discrepancies in lithiation to the initial crystallinity of silicon as well as to the local SEI chemistry and morphology. This study emphasizes how initial heterogeneities in the percolating electronic network and the porosity affect SiNPs aggregates along cycling. These findings pinpoint the crucial role of an optimized formulation in silicon-based thick electrodes.

The long term scaling prospects for solid-state quantum computing architectures relies heavily on the ability to simply and reliably measure and control the coherent electron interaction strength, known as the tunnel coupling, t_c. Here, we describe a method to extract the t_c between two quantum dots (QDs) utilising their different tunnel rates to a reservoir. We demonstrate the technique on a few donor triple QD tunnel coupled to a nearby single-electron transistor (SET) in silicon. The device was patterned using scanning tunneling microscopy-hydrogen lithography allowing for a direct measurement of the tunnel coupling for a given inter-dot distance. We extract {t}_{{c}}=5.5pm 1.8;{GHz} and {t}_{{c}}=2.2pm 1.3;{GHz} between each of the nearest-neighbour QDs which are separated by 14.5 nm and 14.0 nm, respectively. The technique allows for an accurate measurement of t_c for nanoscale devices even when it is smaller than the electron temperature and is an ideal characterisation tool for multi-dot systems with a charge sensor.

The elementary CuO2 plane sustaining cuprate high-temperature superconductivity occurs typically at the base of a periodic array of edge-sharing CuO5 pyramids. Virtual transitions of electrons between adjacent planar Cu and O atoms, occurring at a rate t/{hbar} and across the charge-transfer energy gap E, generate 'superexchange' spin-spin interactions of energy Japprox4t^4/E^3 in an antiferromagnetic correlated-insulator state. However, Hole doping the CuO2 plane converts this into a very high temperature superconducting state whose electron-pairing is exceptional. A leading proposal for the mechanism of this intense electron-pairing is that, while hole doping destroys magnetic order it preserves pair-forming superexchange interactions governed by the charge-transfer energy scale E. To explore this hypothesis directly at atomic-scale, we combine single-electron and electron-pair (Josephson) scanning tunneling microscopy to visualize the interplay of E and the electron-pair density nP in {Bi_2Sr_2CaCu_2O_{8+x}}. The responses of both E and nP to alterations in the distance {\delta} between planar Cu and apical O atoms are then determined. These data reveal the empirical crux of strongly correlated superconductivity in CuO2, the response of the electron-pair condensate to varying the charge transfer energy. Concurrence of predictions from strong-correlation theory for hole-doped charge-transfer insulators with these observations, indicates that charge-transfer superexchange is the electron-pairing mechanism of superconductive {Bi_2Sr_2CaCu_2O_{8+x}}.

The emergence of two-dimensional (2D) materials has attracted a great deal of attention due to their fascinating physical properties and potential applications for future nanoelectronic devices. Since the first isolation of graphene, a Dirac material, a large family of new functional 2D materials have been discovered and characterized, including insulating 2D boron nitride, semiconducting 2D transition metal dichalcogenides and black phosphorus, and superconducting 2D bismuth strontium calcium copper oxide, molybdenum disulphide and niobium selenide, etc. Here, we report the identification of ferromagnetic thin flakes of Cr2Ge2Te6 (CGT) with thickness down to a few nanometers, which provides a very important piece to the van der Waals structures consisting of various 2D materials. We further demonstrate the giant modulation of the channel resistance of 2D CGT devices via electric field effect. Our results illustrate the gate voltage tunability of 2D CGT and the potential of CGT, a ferromagnetic 2D material, as a new functional quantum material for applications in future nanoelectronics and spintronics.

For the large and chemically diverse GMTKN55 benchmark suite, we have studied the performance of density-corrected density functional theory (HF-DFT), compared to self-consistent DFT, for several pure and hybrid GGA and meta-GGA exchange-correlation (XC) functionals (PBE, BLYP, TPSS, SCAN) as a function of the percentage of HF exchange in the hybrid. The D4 empirical dispersion correction has been added throughout. For subsets dominated by dynamical correlation -- particularly noncovalent interaction subsets -- HF-DFT is highly beneficial, particularly at low HF exchange percentages. For subsets with significant static correlation (i.e., where a Hartree-Fock determinant is not a good zero-order wavefunction), HF-DFT may do more harm than good. While the self-consistent series show optima at or near 37.5% (i.e., 3/8) for all four XC functionals -- consistent with Grimme's proposal of the PBE38 functional -- HF-BnLYP-D4, HF-PBEn-D4, and HF-TPSSn-D4 all exhibit minima nearer 25% (i.e., 1/4). Intriguingly, for HF-SCANn-D4, the minimum is near 10%, but the weighted mean absolute error (WTMAD2) for GMTKN55 is only barely lower than that of HF-SCAN-D4 (i.e., where the post-HF step is a pure meta-GGA). The latter becomes an attractive option, only slightly more costly than pure Hartree-Fock, and devoid of adjustable parameters other than the three in the dispersion correction. Moreover, its WTMAD2 is only surpassed by the highly empirical M06-2X and by the combinatorically optimized empirical range-separated hybrids wB97X-V and wB97M-V.

Using {\em ab initio} density functional theory calculations, we characterize changes in the electronic structure of MoS_{2} monolayers introduced by missing or additional adsorbed sulfur atoms. We furthermore identify the chemical and electronic function of substances that have been reported to reduce the adverse effect of sulfur vacancies in quenching photoluminescence and reducing electronic conductance. We find that thiol-group containing molecules adsorbed at vacancy sites may re-insert missing sulfur atoms. In presence of additional adsorbed sulfur atoms, thiols may form disulfides on the MoS_{2} surface to mitigate the adverse effect of defects.

Facing with grave climate change and enormous energy demand, catalyzer gets more and more important due to its significant effect on reducing fossil fuels consumption. Hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) by water splitting are feasible ways to produce clean sustainable energy. Here we systematically explored atomic structures and related STM images of Se defects in PtSe2. The equilibrium fractions of vacancies under variable conditions were detailly predicted. Besides, we found the vacancies are highly kinetic stable, without recovering or aggregation. The Se vacancies in PtSe2 can dramatically enhance the HER performance, comparing with, even better than Pt(111). Beyond, we firstly revealed that PtSe2 monolayer with Se vacancies is also a good OER catalyst. The excellent bipolar catalysis of Se vacancies were further confirmed by experimental measurements. We produced defective PtSe2 by direct selenization of Pt foil at 773 K using a CVD process. Then we observed the HER and OER performance of defective PtSe2 is much highly efficient than Pt foils by a series of measurements. Our work with compelling theoretical and experimental studies indicates PtSe2 with Se defects is an ideal bipolar candidate for HER and OER.

Silicon nitride has emerged as a promising photonic platform for integrated single-photon sources, yet the microscopic origin of the recently observed bright quantum emissions remains unclear. Using hybrid density functional theory, we show that the negatively charged N_SiV_N center (NV^{-}) in the C_{1h} configuration exhibits a linearly polarized zero-phonon line (ZPL) at 2.46 eV, with a radiative lifetime of 9.01 ns and a high Debye-Waller (DW) factor of 33%. We further find that the C_{1h} configuration is prone to a pseudo-Jahn-Teller distortion, yielding two symmetrically equivalent defect structures that emit bright, linearly polarized ZPL at 1.80 eV with a lifetime of 10.17 ns and an increased DW factor of 41%. These nitrogen-vacancy-related defects explain the origins of visible quantum emissions, paving the way for deterministic and monolithically integrated silicon-nitride quantum photonics.

We present a low-cost ultraviolet to infrared absolute quantum efficiency detector characterization system developed using commercial off-the-shelf components. The key components of the experiment include a light source,a regulated power supply, a monochromator, an integrating sphere, and a calibrated photodiode. We provide a step-by-step procedure to construct the photon and quantum efficiency transfer curves of imaging sensors. We present results for the GSENSE 2020 BSI CMOS sensor and the Sony IMX 455 BSI CMOS sensor. As a reference for similar characterizations, we provide a list of parts and associated costs along with images of our setup.

The discovery of van der Waals magnets has established a new domain in the field of magnetism, opening novel pathways for the electrical control of magnetic properties. In this context, Fe3GeTe2 (FGT) emerges as an exemplary candidate owing to its intrinsic metallic properties, which facilitate the interplay of both charge and spin degrees of freedom. Here, the bidirectional voltage control of exchange bias (EB) effect in a perpendicularly magnetized all-van der Waals FGT/O-FGT/hBN heterostructure is demonstrated. The antiferromagnetic O-FGT layer is formed by naturally oxidizing the FGT surface. The observed EB magnitude reaches 1.4 kOe with a blocking temperature (150 K) reaching close to the Curie temperature of FGT. Both the exchange field and the blocking temperature values are among the highest in the context of layered materials. The EB modulation exhibits a linear dependence on the gate voltage and its polarity, observable in both positive and negative field cooling (FC) experiments. Additionally, gate voltage-controlled magnetization switching, highlighting the potential of FGT-based heterostructures is demonstrated in advanced spintronic devices. These findings display a methodology to modulate the magnetism of van der Waals magnets offering new avenues for the development of high-performance magnetic devices.

Conventional semiconductor-based integrated circuits are gradually approaching fundamental scaling limits. Many prospective solutions have recently emerged to supplement or replace both the technology on which basic devices are built and the architecture of data processing. Neuromorphic circuits are a promising approach to computing where techniques used by the brain to achieve high efficiency are exploited. Many existing neuromorphic circuits rely on unconventional and useful properties of novel technologies to better mimic the operation of the brain. One such technology is single flux quantum (SFQ) logic -- a cryogenic superconductive technology in which the data are represented by quanta of magnetic flux (fluxons) produced and processed by Josephson junctions embedded within inductive loops. The movement of a fluxon within a circuit produces a quantized voltage pulse (SFQ pulse), resembling a neuronal spiking event. These circuits routinely operate at clock frequencies of tens to hundreds of gigahertz, making SFQ a natural technology for processing high frequency pulse trains. Prior proposals for SFQ neural networks often require energy-expensive fluxon conversions, involve heterogeneous technologies, or exclusively focus on device level behavior. In this paper, a design methodology for deep single flux quantum neuromorphic networks is presented. Synaptic and neuronal circuits based on SFQ technology are presented and characterized. Based on these primitives, a deep neuromorphic XOR network is evaluated as a case study, both at the architectural and circuit levels, achieving wide classification margins. The proposed methodology does not employ unconventional superconductive devices or semiconductor transistors. The resulting networks are tunable by an external current, making this proposed system an effective approach for scalable cryogenic neuromorphic computing.

The development of selective high precision chemical functionalization strategies for device fabrication, in conjunction with associated techniques for patterning graphene wafers with atomic accuracy would provide the necessary basis for a post-CMOS manufacturing technology. This requires a thorough understanding of the principles governing the reactivity and patterning of graphene at the sub-nanometer length scale. This article reviews our quest to delineate the principles of graphene chemistry - that is, the chemistry at the Dirac point and beyond, and the effect of covalent chemistry on the electronic structure, electrical transport and magnetic properties of this low-dimensional material in order to enable the scalable production of graphene-based devices for low- and high-end technology applications.

Graph representation learning on Analog-Mixed Signal (AMS) circuits is crucial for various downstream tasks, e.g., parasitic estimation. However, the scarcity of design data, the unbalanced distribution of labels, and the inherent diversity of circuit implementations pose significant challenges to learning robust and transferable circuit representations. To address these limitations, we propose CircuitGCL, a novel graph contrastive learning framework that integrates representation scattering and label rebalancing to enhance transferability across heterogeneous circuit graphs. CircuitGCL employs a self-supervised strategy to learn topology-invariant node embeddings through hyperspherical representation scattering, eliminating dependency on large-scale data. Simultaneously, balanced mean squared error (BMSE) and balanced softmax cross-entropy (BSCE) losses are introduced to mitigate label distribution disparities between circuits, enabling robust and transferable parasitic estimation. Evaluated on parasitic capacitance estimation (edge-level task) and ground capacitance classification (node-level task) across TSMC 28nm AMS designs, CircuitGCL outperforms all state-of-the-art (SOTA) methods, with the R^2 improvement of 33.64% sim 44.20% for edge regression and F1-score gain of 0.9times sim 2.1times for node classification. Our code is available at https://github.com/ShenShan123/CircuitGCL.

Recent advances in photonic optimization have enabled calculation of performance bounds for a wide range of electromagnetic objectives, albeit restricted to single-material systems. Motivated by growing theoretical interest and fabrication advances, we present a framework to bound the performance of photonic heterostructures and apply it to investigate maximum absorption characteristics of multilayer films and compact, free-form multi-material scatterers. Limits predict trends seen in topology-optimized geometries -- often coming within factors of two of specific designs -- and may be exploited in conjunction with inverse designs to predict when heterostructures are expected to outperform their optimal single-material counterparts.

Perovskite solar cells (PSCs) have rapidly emerged as a leading contender in next-generation photovoltaic technologies, owing to their exceptional power conversion efficiencies and advantageous material properties. Despite these advances, challenges such as long-term stability, environmental sustainability, and scalable manufacturing continue to hinder their commercialization. Precursor additive engineering has shown promise in addressing these issues by enhancing both the performance and durability of PSCs. However, the explosive growth of scientific literature and the complex interplay of materials, processes, and device architectures make it increasingly difficult for researchers to efficiently access, organize, and utilize domain knowledge in this rapidly evolving field. To address this gap, we introduce Perovskite-R1, a specialized large language model (LLM) with advanced reasoning capabilities tailored for the discovery and design of PSC precursor additives. By systematically mining and curating 1,232 high-quality scientific publications and integrating a comprehensive library of 33,269 candidate materials, we constructed a domain-specific instruction-tuning dataset using automated question-answer generation and chain-of-thought reasoning. Fine-tuning the QwQ-32B model on this dataset resulted in Perovskite-R1, which can intelligently synthesize literature insights and generate innovative and practical solutions for defect passivation and the selection of precursor additives. Experimental validation of several model-proposed strategies confirms their effectiveness in improving material stability and performance. Our work demonstrates the potential of domain-adapted LLMs in accelerating materials discovery and provides a closed-loop framework for intelligent, data-driven advancements in perovskite photovoltaic research.

Most recent exciting experimental advances introduced buckled and flat borophene nanomembranes as new members to the advancing family of two-dimensional (2D) materials. Borophene, is the boron atom analogue of graphene with interesting properties suitable for a wide variety of applications. In this investigation, we conducted extensive first-principles density functional theory simulations to explore the application of four different flat borophene films as anode materials for Al, Mg, Na or Li-ion batteries. In our modelling, first the strongest binding sites were predicted and next we gradually increased the adatoms coverage until the maximum capacity was reached. Bader charge analysis was employed to evaluate the charge transfer between the adatoms and the borophene films. Nudged elastic band method was also utilized to probe the ions diffusions. We calculated the average atom adsorption energies and open-circuit voltage profiles as a function of adatoms coverage. Our findings propose the flat borophene films as electrically conductive and thermally stable anode materials with ultra high capacities of 2480 mAh/g, 1640 mAh/g and 2040 mAh/g for Mg, Na or Li-ion batteries, respectively, which distinctly outperform not only the buckled borophene but also all other 2D materials. Our study may provide useful viewpoint with respect to the possible application of flat borophene films for the design of high capacity and light weight advanced rechargeable ion batteries.

Standing as one of the most significant barriers to reaching quantum advantage, state-preparation fidelities on noisy intermediate-scale quantum processors suffer from quantum-gate errors, which accumulate over time. A potential remedy is pulse-based state preparation. We numerically investigate the minimal evolution times (METs) attainable by optimizing (microwave and exchange) pulses on silicon hardware. We investigate two state preparation tasks. First, we consider the preparation of molecular ground states and find the METs for H_2, HeH^+, and LiH to be 2.4 ns, 4.4 ns, and 27.2 ns, respectively. Second, we consider transitions between arbitrary states and find the METs for transitions between arbitrary four-qubit states to be below 50 ns. For comparison, connecting arbitrary two-qubit states via one- and two-qubit gates on the same silicon processor requires approximately 200 ns. This comparison indicates that pulse-based state preparation is likely to utilize the coherence times of silicon hardware more efficiently than gate-based state preparation. Finally, we quantify the effect of silicon device parameters on the MET. We show that increasing the maximal exchange amplitude from 10 MHz to 1 GHz accelerates the METs, e.g., for H_2 from 84.3 ns to 2.4 ns. This demonstrates the importance of fast exchange. We also show that increasing the maximal amplitude of the microwave drive from 884 kHz to 56.6 MHz shortens state transitions, e.g., for two-qubit states from 1000 ns to 25 ns. Our results bound both the state-preparation times for general quantum algorithms and the execution times of variational quantum algorithms with silicon spin qubits.

Accelerated materials discovery is an urgent demand to drive advancements in fields such as energy conversion, storage, and catalysis. Property-directed generative design has emerged as a transformative approach for rapidly discovering new functional inorganic materials with multiple desired properties within vast and complex search spaces. However, this approach faces two primary challenges: data scarcity for functional properties and the multi-objective optimization required to balance competing tasks. Here, we present a multi-property-directed generative framework designed to overcome these limitations and enhance site symmetry-compliant crystal generation beyond P1 (translational) symmetry. By incorporating Wyckoff-position-based data augmentation and transfer learning, our framework effectively handles sparse and small functional datasets, enabling the generation of new stable materials simultaneously conditioned on targeted space group, band gap, and formation energy. Using this approach, we identified previously unknown thermodynamically and lattice-dynamically stable semiconductors in tetragonal, trigonal, and cubic systems, with bandgaps ranging from 0.13 to 2.20 eV, as validated by density functional theory (DFT) calculations. Additionally, we assessed their thermoelectric descriptors using DFT, indicating their potential suitability for thermoelectric applications. We believe our integrated framework represents a significant step forward in generative design of inorganic materials.

Molecular ferroelectric materials have attracted widespread attention due to their abundant chemical diversity, structural tunability, low synthesis temperature, and high flexibility. Meanwhile, the integration of molecular ferroelectric materials and Si is still challenging, while the fundamental understanding of the ferroelectric switching process is still lacking. Herein, we have successfully synthesized the imidazole perchlorate (ImClO4) single crystals and a series of high-quality highly-oriented thin films on a Si substrate. A high inverse piezoelectric coefficient (55.7 pm/V) is demonstrated for the thin films. Two types of domain bands can be observed (in the size of a few microns): type-I band tilts ~60{\deg} with respect to the horizontal axis, while the type-II band is perpendicular to the horizontal axis. Most of the domain walls (DWs) are 180{\deg} DWs for the two bands, while some 109{\deg} DWs can also be observed. Interestingly, the DWs in type-I band are curved, charged domain walls; while the 180{\deg} DWs in type-II band are straight, noncharged domain walls. After applying +20 V for 5 s through a PFM tip, the 180{\deg} DWs in type-I band shrink first, then disconnect from the band boundary, forming a needle-like domain with a size of ~100 nm. The needle-like domain will extend toward the band boundary after an inverse bias is applied (-20 V), and expand along the band boundary after touching the boundary. Whereas for the type-II domain band, the 180{\deg} DWs are more mobile than the 109{\deg} domain walls, which displaces ~500 nm after applying +20 V. While such displacement is much shorter after the application of a negative bias for the same duration, starting from the positively poled sample. We hope to spur further interest in the on-chip design of the molecular ferroelectrics based electronic devices.

Molecular representation is a foundational element in our understanding of the physical world. Its importance ranges from the fundamentals of chemical reactions to the design of new therapies and materials. Previous molecular machine learning models have employed strings, fingerprints, global features, and simple molecular graphs that are inherently information-sparse representations. However, as the complexity of prediction tasks increases, the molecular representation needs to encode higher fidelity information. This work introduces a novel approach to infusing quantum-chemical-rich information into molecular graphs via stereoelectronic effects. We show that the explicit addition of stereoelectronic interactions significantly improves the performance of molecular machine learning models. Furthermore, stereoelectronics-infused representations can be learned and deployed with a tailored double graph neural network workflow, enabling its application to any downstream molecular machine learning task. Finally, we show that the learned representations allow for facile stereoelectronic evaluation of previously intractable systems, such as entire proteins, opening new avenues of molecular design.

We present 1d-qt-ideal-solver, an open-source Python library for simulating one-dimensional quantum tunneling dynamics under idealized coherent conditions. The solver implements the split-operator method with second-order Trotter-Suzuki factorization, utilizing FFT-based spectral differentiation for the kinetic operator and complex absorbing potentials to eliminate boundary reflections. Numba just-in-time compilation achieves performance comparable to compiled languages while maintaining code accessibility. We validate the implementation through two canonical test cases: rectangular barriers modeling field emission through oxide layers and Gaussian barriers approximating scanning tunneling microscopy interactions. Both simulations achieve exceptional numerical fidelity with machine-precision energy conservation over femtosecond-scale propagation. Comparative analysis employing information-theoretic measures and nonparametric hypothesis tests reveals that rectangular barriers exhibit moderately higher transmission coefficients than Gaussian barriers in the over-barrier regime, though Jensen-Shannon divergence analysis indicates modest practical differences between geometries. Phase space analysis confirms complete decoherence when averaged over spatial-temporal domains. The library name reflects its scope: idealized signifies deliberate exclusion of dissipation, environmental coupling, and many-body interactions, limiting applicability to qualitative insights and pedagogical purposes rather than quantitative experimental predictions. Distributed under the MIT License, the library provides a deployable tool for teaching quantum mechanics and preliminary exploration of tunneling dynamics.

Freestanding thin films, a class of low-dimensional materials capable of maintaining structural integrity without substrates, have emerged as a forefront research focus. Their unique advantages-circumventing substrate clamping, liberating intrinsic material properties, and enabling cross-platform heterogeneous integration-underpin this prominence. This review systematically summarizes core fabrication techniques, including physical delamination (e.g., laser lift-off, mechanical exfoliation) and chemical etching, alongside associated transfer strategies. It further explores the induced strain modulation mechanisms, extreme mechanical properties and interface decoupling effects enabled by these films. Representative case studies demonstrate breakthrough applications in flexible/ultrathin electronics, ultrahigh-sensitivity sensors and the exploration of novel quantum states. Critical challenges regarding scalable fabrication, precise interface control, and long-term stability are analyzed, concluding with prospects for emerging applications in bio-inspired intelligent devices, quantum precision sensing, and brain-inspired neural networks.

This study systematically investigates the photoconductive properties of low-temperature-grown Beryllium (Be)-doped InGaAs/InAlAs strain-balanced superlattices (SLs) grown by molecular beam epitaxy under stationary growth conditions on semi-insulating InP:Fe substrates. The stationary growth approach enabled precise control over lateral gradients in layer strain, composition, and thickness across a single wafer, while strain-balancing facilitated pseudomorphic growth to explore a wide range of structural parameters, providing a robust platform to study their influence on photoconductive performance. Structural characterization confirmed high crystalline quality and smooth surface morphology in all samples. Time-resolved pump-probe spectroscopy revealed subpicosecond carrier lifetimes, validating the effectiveness of strain balancing and Be doping in tuning ultrafast recombination dynamics. Hall effect measurements supported by 8-band k.p modeling revealed enhanced carrier mobility in strain-balanced SLs compared to lattice-matched structures, primarily due to reduced electron and hole effective masses and stronger quantum confinement. Additionally, optical absorption under 1550 nm excitation showed improved absorption coefficients for the strain-balanced structure, consistent with the reduction in bandgap energy predicted by theoretical modeling, thereby enhancing photon-to-carrier conversion efficiency. Furthermore, transmission electron microscopy provided first-time evidence of significant Be-induced interdiffusion at the strained SL interfaces, an important factor influencing carrier transport and dynamics. These findings position low-temperature-grown Be-doped InGaAs/InAlAs strain-balanced SLs as promising materials for high-performance broadband THz photoconductive detectors operating at telecom-compatible wavelengths.

Quantum computers can be used to address molecular structure, materials science and condensed matter physics problems, which currently stretch the limits of existing high-performance computing resources. Finding exact numerical solutions to these interacting fermion problems has exponential cost, while Monte Carlo methods are plagued by the fermionic sign problem. These limitations of classical computational methods have made even few-atom molecular structures problems of practical interest for medium-sized quantum computers. Yet, thus far experimental implementations have been restricted to molecules involving only Period I elements. Here, we demonstrate the experimental optimization of up to six-qubit Hamiltonian problems with over a hundred Pauli terms, determining the ground state energy for molecules of increasing size, up to BeH2. This is enabled by a hardware-efficient variational quantum eigensolver with trial states specifically tailored to the available interactions in our quantum processor, combined with a compact encoding of fermionic Hamiltonians and a robust stochastic optimization routine. We further demonstrate the flexibility of our approach by applying the technique to a problem of quantum magnetism. Across all studied problems, we find agreement between experiment and numerical simulations with a noisy model of the device. These results help elucidate the requirements for scaling the method to larger systems, and aim at bridging the gap between problems at the forefront of high-performance computing and their implementation on quantum hardware.

We present an open-source database of superconducting quantum device designs that may be used as the starting point for customized devices. Each design can be generated programmatically using the open-source Qiskit Metal package, and simulated using finite-element electromagnetic solvers. We present a robust workflow for achieving high accuracy on design simulations. Many designs in the database are experimentally validated, showing excellent agreement between simulated and measured parameters. Our database includes a front-end interface that allows users to generate ``best-guess'' designs based on desired circuit parameters. This project lowers the barrier to entry for research groups seeking to make a new class of devices by providing them a well-characterized starting point from which to refine their designs.

Developing the field of neuromorphic quantum computing necessitates designing scalable quantum memory devices. Here, we propose a superconducting quantum memory device in the microwave regime, termed as a microwave quantum memcapacitor. It comprises two linked resonators, the primary one is coupled to a Superconducting Quantum Interference Device, which allows for the modulation of the resonator properties through external magnetic flux. The auxiliary resonator, operated through weak measurements, provides feedback to the primary resonator, ensuring stable memory behaviour. This device operates with a classical input in one cavity while reading the response in the other, serving as a fundamental building block toward arrays of microwave quantum memcapacitors. We observe that a bipartite setup can retain its memory behaviour and gains entanglement and quantum correlations. Our findings pave the way for the experimental implementation of memcapacitive superconducting quantum devices and memory device arrays for neuromorphic quantum computing.

Generative models have recently shown great promise for accelerating the design and discovery of new functional materials. Conditional generation enhances this capacity by allowing inverse design, where specific desired properties can be requested during the generation process. However, conditioning of transformer-based approaches, in particular, is constrained by discrete tokenisation schemes and the risk of catastrophic forgetting during fine-tuning. This work introduces CrystaLLM-π (property injection), a conditional autoregressive framework that integrates continuous property representations directly into the transformer's attention mechanism. Two architectures, Property-Key-Value (PKV) Prefix attention and PKV Residual attention, are presented. These methods bypass inefficient sequence-level tokenisation and preserve foundational knowledge from unsupervised pre-training on Crystallographic Information Files (CIFs) as textual input. We establish the efficacy of these mechanisms through systematic robustness studies and evaluate the framework's versatility across two distinct tasks. First, for structure recovery, the model processes high-dimensional, heterogeneous X-ray diffraction patterns, achieving structural accuracy competitive with specialised models and demonstrating applications to experimental structure recovery and polymorph differentiation. Second, for materials discovery, the model is fine-tuned on a specialised photovoltaic dataset to generate novel, stable candidates validated by Density Functional Theory (DFT). It implicitly learns to target optimal band gap regions for high photovoltaic efficiency, demonstrating a capability to map complex structure-property relationships. CrystaLLM-π provides a unified, flexible, and computationally efficient framework for inverse materials design.

Variational quantum eigensolvers (VQEs) are among the most promising quantum algorithms for solving electronic structure problems in quantum chemistry, particularly during the Noisy Intermediate-Scale Quantum (NISQ) era. In this study, we investigate the capabilities and limitations of VQE algorithms implemented on current quantum hardware for determining molecular ground-state energies, focusing on the adaptive derivative-assembled pseudo-Trotter ansatz VQE (ADAPT-VQE). To address the significant computational challenges posed by molecular Hamiltonians, we explore various strategies to simplify the Hamiltonian, optimize the ansatz, and improve classical parameter optimization through modifications of the COBYLA optimizer. These enhancements are integrated into a tailored quantum computing implementation designed to minimize the circuit depth and computational cost. Using benzene as a benchmark system, we demonstrate the application of these optimizations on an IBM quantum computer. Despite these improvements, our results highlight the limitations imposed by current quantum hardware, particularly the impact of quantum noise on state preparation and energy measurement. The noise levels in today's devices prevent meaningful evaluations of molecular Hamiltonians with sufficient accuracy to produce reliable quantum chemical insights. Finally, we extrapolate the requirements for future quantum hardware to enable practical and scalable quantum chemistry calculations using VQE algorithms. This work provides a roadmap for advancing quantum algorithms and hardware toward achieving quantum advantage in molecular modeling.

Recently, sophisticated deep learning-based approaches have been developed for generating efficient initial guesses to accelerate the convergence of density functional theory (DFT) calculations. While the actual initial guesses are often density matrices (DM), quantities that can convert into density matrices also qualify as alternative forms of initial guesses. Hence, existing works mostly rely on the prediction of the Hamiltonian matrix for obtaining high-quality initial guesses. However, the Hamiltonian matrix is both numerically difficult to predict and intrinsically non-transferable, hindering the application of such models in real scenarios. In light of this, we propose a method that constructs DFT initial guesses by predicting the electron density in a compact auxiliary basis representation using E(3)-equivariant neural networks. Trained on small molecules with up to 20 atoms, our model is able to achieve an average 33.3% self-consistent field (SCF) step reduction on systems up to 60 atoms, substantially outperforming Hamiltonian-centric and DM-centric models. Critically, this acceleration remains nearly constant with increasing system sizes and exhibits strong transferring behaviors across orbital basis sets and exchange-correlation (XC) functionals. To the best of our knowledge, this work represents the first and robust candidate for a universally transferable DFT acceleration method. We are also releasing the SCFbench dataset and its accompanying code to facilitate future research in this promising direction.

Fermi operator expansion (FOE) methods are powerful alternatives to diagonalization type methods for solving Kohn-Sham density functional theory (KSDFT). One example is the pole expansion and selected inversion (PEXSI) method, which approximates the Fermi operator by rational matrix functions and reduces the computational complexity to at most quadratic scaling for solving KSDFT. Unlike diagonalization type methods, the chemical potential often cannot be directly read off from the result of a single step of evaluation of the Fermi operator. Hence multiple evaluations are needed to be sequentially performed to compute the chemical potential to ensure the correct number of electrons within a given tolerance. This hinders the performance of FOE methods in practice. In this paper we develop an efficient and robust strategy to determine the chemical potential in the context of the PEXSI method. The main idea of the new method is not to find the exact chemical potential at each self-consistent-field (SCF) iteration iteration, but to dynamically and rigorously update the upper and lower bounds for the true chemical potential, so that the chemical potential reaches its convergence along the SCF iteration. Instead of evaluating the Fermi operator for multiple times sequentially, our method uses a two-level strategy that evaluates the Fermi operators in parallel. In the regime of full parallelization, the wall clock time of each SCF iteration is always close to the time for one single evaluation of the Fermi operator, even when the initial guess is far away from the converged solution. We demonstrate the effectiveness of the new method using examples with metallic and insulating characters, as well as results from ab initio molecular dynamics.

Tunneling spectroscopy is widely used to examine the subgap spectra in semiconductor-superconductor nanostructures when searching for Majorana zero modes (MZMs). Typically, semiconductor sections controlled by local gates at the ends of hybrids serve as tunnel barriers. Besides detecting states only at the hybrid ends, such gate-defined tunnel probes can cause the formation of non-topological subgap states that mimic MZMs. Here, we develop an alternative type of tunnel probes to overcome these limitations. After the growth of an InSb-Al hybrid nanowire, a precisely controlled in-situ oxidation of the Al shell is performed to yield a nm-thick Al oxide layer. In such thin isolating layer, tunnel probes can be arbitrarily defined at any position along the hybrid nanowire by shadow-wall angle-deposition of metallic leads. This allows us to make multiple tunnel probes along single nanowire hybrids and to successfully identify Andreev bound states (ABSs) of various spatial extension residing along the hybrids.

Materials combining both a high refractive index and a wide band gap are of great interest for optoelectronic and sensor applications. However, these two properties are typically described by an inverse correlation with high refractive index appearing in small gap materials and vice-versa. Here, we conduct a first-principles high-throughput study on more than 4000 semiconductors (with a special focus on oxides). Our data confirm the general inverse trend between refractive index and band gap but interesting outliers are also identified. The data are then analyzed through a simple model involving two main descriptors: the average optical gap and the effective frequency. The former can be determined directly from the electronic structure of the compounds, but the latter cannot. This calls for further analysis in order to obtain a predictive model. Nonetheless, it turns out that the negative effect of a large band gap on the refractive index can counterbalanced in two ways: (i) by limiting the difference between the direct band gap and the average optical gap which can be realized by a narrow distribution in energy of the optical transitions and (ii) by increasing the effective frequency which can be achieved through either a high number of transitions from the top of the valence band to the bottom of the conduction or a high average probability for these transitions. Focusing on oxides, we use our data to investigate how the chemistry influences this inverse relationship and rationalize why certain classes of materials would perform better. Our findings can be used to search for new compounds in many optical applications both in the linear and non-linear regime (waveguides, optical modulators, laser, frequency converter, etc.).

Electrical control of individual spins and photons in solids is key for quantum technologies, but scaling down to small, static systems remains challenging. Here, we demonstrate nanoscale electrical tuning of neutral and charged excitons in monolayer WSe2 using 1-nm carbon nanotube gates. Electrostatic simulations reveal a confinement radius below 15 nm, reaching the exciton Bohr radius limit for few-layer dielectric spacing. In situ photoluminescence spectroscopy shows gate-controlled conversion between neutral excitons, negatively charged trions, and biexcitons at 4 K. Important for quantum information processing applications, our measurements indicate gating of a local 2D electron gas in the WSe2 layer, coupled to photons via trion transitions with binding energies exceeding 20 meV. The ability to deterministically tune and address quantum emitters using nanoscale gates provides a pathway towards large-scale quantum optoelectronic circuits and spin-photon interfaces for quantum networking.

High magnetic field and low temperature transport is carried out in order to characterize the charge carriers of PtSe_2. In particular, the Shubnikov-de Haas oscillations arising at applied magnetic field strengths gtrsim 4.5,T are found to occur exclusively in plane and emerge at a layer thickness of approx 18,nm, increasing in amplitude and decreasing in frequency for thinner PtSe_2 flakes. Moreover, the quantum transport time, Berry phase, Dingle temperature and cyclotron mass of the charge carriers are ascertained. The emergence of weak antilocalization (WAL) lies in contrast to the presence of magnetic moments from Pt vacancies. An explanation is provided on how WAL and the Kondo effect can be observed within the same material. Detailed information about the charge carriers and transport phenomena in PtSe_2 is obtained, which is relevant for the design of prospective spintronic and orbitronic devices and for the realization of orbital Hall effect-based architectures.

The key challenge in advancing multivalent-ion batteries lies in finding suitable intercalation hosts. Open-tunnel oxides, featuring one-dimensional channels or nanopores, show promise for enabling effective ion transport. However, the vast range of compositional possibilities renders traditional experimental and quantum-based methods impractical for large-scale studies. This work presents a generative AI framework that uses the Crystal Diffusion Variational Autoencoder (CDVAE) and a fine-tuned Large Language Model (LLM) to expedite the discovery of stable open-tunneled oxide materials for multivalent-ion batteries. By combining machine learning with data mining techniques, five promising transition metal oxide (TMO) structures are generated. These structures, known for forming open-tunnel oxide frameworks, are structurally validated through Density Functional Theory (DFT). The results show that the generated structures have lower formation energies compared to similar compositions in the Materials Project (MP) database, indicating improved thermodynamic stability. Additionally, the graph-based M3GNet model is employed to relax further generated structures, providing a more computationally efficient alternative to DFT. Machine learning-based predictions of formation energy, band gap, and energy above the hull refine the selection process, leading to the identification of materials with significant potential for real-world battery applications. This research demonstrates the power of generative AI in rapidly exploring the vast chemical space of TMOs, offering a new approach to discovering stable open-tunnel oxides for multivalent-ion batteries. The results highlight the potential of this approach to contribute to more sustainable energy storage technologies, addressing the growing concerns surrounding the scarcity of lithium.

Generating novel molecules with out-of-distribution properties is a major challenge in molecular discovery. While supervised learning methods generate high-quality molecules similar to those in a dataset, they struggle to generalize to out-of-distribution properties. Reinforcement learning can explore new chemical spaces but often conducts 'reward-hacking' and generates non-synthesizable molecules. In this work, we address this problem by integrating a state-of-the-art supervised learning method, STGG+, in an active learning loop. Our approach iteratively generates, evaluates, and fine-tunes STGG+ to continuously expand its knowledge. We denote this approach STGG+AL. We apply STGG+AL to the design of organic pi-functional materials, specifically two challenging tasks: 1) generating highly absorptive molecules characterized by high oscillator strength and 2) designing absorptive molecules with reasonable oscillator strength in the near-infrared (NIR) range. The generated molecules are validated and rationalized in-silico with time-dependent density functional theory. Our results demonstrate that our method is highly effective in generating novel molecules with high oscillator strength, contrary to existing methods such as reinforcement learning (RL) methods. We open-source our active-learning code along with our Conjugated-xTB dataset containing 2.9 million pi-conjugated molecules and the function for approximating the oscillator strength and absorption wavelength (based on sTDA-xTB).

Scalable and cost-effective solutions to renewable energy storage are essential to addressing the world's rising energy needs while reducing climate change. As we increase our reliance on renewable energy sources such as wind and solar, which produce intermittent power, storage is needed to transfer power from times of peak generation to peak demand. This may require the storage of power for hours, days, or months. One solution that offers the potential of scaling to nation-sized grids is the conversion of renewable energy to other fuels, such as hydrogen or methane. To be widely adopted, this process requires cost-effective solutions to running electrochemical reactions. An open challenge is finding low-cost electrocatalysts to drive these reactions at high rates. Through the use of quantum mechanical simulations (density functional theory), new catalyst structures can be tested and evaluated. Unfortunately, the high computational cost of these simulations limits the number of structures that may be tested. The use of machine learning may provide a method to efficiently approximate these calculations, leading to new approaches in finding effective electrocatalysts. In this paper, we provide an introduction to the challenges in finding suitable electrocatalysts, how machine learning may be applied to the problem, and the use of the Open Catalyst Project OC20 dataset for model training.

Two-dimensional (2D) materials have emerged as a versatile and powerful platform for quantum technologies, offering atomic-scale control, strong quantum confinement, and seamless integration into heterogeneous device architectures. Their reduced dimensionality enables unique quantum phenomena, including optically addressable spin defects, tunable single-photon emitters, low-dimensional magnetism, gate-controlled superconductivity, and correlated states in Moiré superlattices. This Roadmap provides a comprehensive overview of recent progress and future directions in exploiting 2D materials for quantum sensing, computation, communication, and simulation. We survey advances spanning spin defects and quantum sensing, quantum emitters and nonlinear photonics, computational theory and data-driven discovery of quantum defects, spintronic and magnonic devices, cavity-engineered quantum materials, superconducting and hybrid quantum circuits, quantum dots, Moiré quantum simulators, and quantum communication platforms. Across these themes, we identify common challenges in defect control, coherence preservation, interfacial engineering, and scalable integration, alongside emerging opportunities driven by machine-learning-assisted design and integrated experiment-theory feedback loops. By connecting microscopic quantum states to mesoscopic excitations and macroscopic device architectures, this Roadmap outlines a materials-centric framework for integrating coherent quantum functionalities and positions 2D materials as foundational building blocks for next-generation quantum technologies.

The exploration of thermoelectric materials is challenging considering the large materials space, combined with added exponential degrees of freedom coming from doping and the diversity of synthetic pathways. Here we seek to incorporate historical data and update and refine it using experimental feedback by employing error-correction learning (ECL). We thus learn from prior datasets and then adapt the model to differences in synthesis and characterization that are otherwise difficult to parameterize. We then apply this strategy to discovering thermoelectric materials where we prioritize synthesis at temperatures < 300{\deg}C. We document a previously unreported chemical family of thermoelectric materials, PbSe:SnSb, finding that the best candidate in this chemical family, 2 wt% SnSb doped PbSe, exhibits a power factor more than 2x that of PbSe. Our investigations show that our closed-loop experimentation strategy reduces the required number of experiments to find an optimized material by as much as 3x compared to high-throughput searches powered by state-of-the-art machine learning models. We also observe that this improvement is dependent on the accuracy of prior in a manner that exhibits diminishing returns, and after a certain accuracy is reached, it is factors associated with experimental pathways that dictate the trends.

Coupling together distinct correlated and topologically non-trivial electronic phases of matter can potentially induce novel electronic orders and phase transitions among them. Transition metal dichalcogenide compounds serve as a bedrock for exploration of such hybrid systems. They host a variety of exotic electronic phases and their Van der Waals nature enables to admix them, either by exfoliation and stacking or by stoichiometric growth, and thereby induce novel correlated complexes. Here we investigate the compound 4Hb-TaS_2 that interleaves the Mott-insulating state of 1T-TaS_2 and the putative spin liquid it hosts together with the metallic state of 2H-TaS_2 and the low temperature superconducting phase it harbors. We reveal a thermodynamic phase diagram that hosts a first order quantum phase transition between a correlated Kondo cluster state and a flat band state in which the Kondo cluster becomes depleted. We demonstrate that this intrinsic transition can be induced by an electric field and temperature as well as by manipulation of the interlayer coupling with the probe tip, hence allowing to reversibly toggle between the Kondo cluster and the flat band states. The phase transition is manifested by a discontinuous change of the complete electronic spectrum accompanied by hysteresis and low frequency noise. We find that the shape of the transition line in the phase diagram is determined by the local compressibility and the entropy of the two electronic states. Our findings set such heterogeneous structures as an exciting platform for systematic investigation and manipulation of Mott-metal transitions and strongly correlated phases and quantum phase transitions therein.

Complementary metal-oxide semiconductor (CMOS) technology has radically reshaped the world by taking humanity to the digital age. Cramming more transistors into the same physical space has enabled an exponential increase in computational performance, a strategy that has been recently hampered by the increasing complexity and cost of miniaturization. To continue achieving significant gains in computing performance, new computing paradigms, such as quantum computing, must be developed. However, finding the optimal physical system to process quantum information, and scale it up to the large number of qubits necessary to build a general-purpose quantum computer, remains a significant challenge. Recent breakthroughs in nanodevice engineering have shown that qubits can now be manufactured in a similar fashion to silicon field-effect transistors, opening an opportunity to leverage the know-how of the CMOS industry to address the scaling challenge. In this article, we focus on the analysis of the scaling prospects of quantum computing systems based on CMOS technology.

We obtain the numerical ground state of a one-dimensional ladder model with the upper and lower chains occupied by spatially-separated electrons and holes, respectively. Under charge neutrality, we find that the excitonic bound states are always formed, i.e., no finite regime of decoupled electron and hole plasma exists at zero temperature. The system either behaves like a bosonic liquid or a bosonic crystal depending on the inter-chain attractive and intra-chain repulsive interaction strengths. We also provide the detailed excitonic phase diagrams in the intra- and inter-chain interaction parameters, with and without disorder. We also comment on the corresponding two-dimensional electron-hole bilayer exciton condensation.

The increasing use of two-dimensional (2D) materials in nanoelectronics demands robust metrology techniques for electrical characterization, especially for large-scale production. While atomic force microscopy (AFM) techniques like conductive AFM (C-AFM) offer high accuracy, they suffer from slow data acquisition speeds due to the raster scanning process. To address this, we introduce SparseC-AFM, a deep learning model that rapidly and accurately reconstructs conductivity maps of 2D materials like MoS_2 from sparse C-AFM scans. Our approach is robust across various scanning modes, substrates, and experimental conditions. We report a comparison between (a) classic flow implementation, where a high pixel density C-AFM image (e.g., 15 minutes to collect) is manually parsed to extract relevant material parameters, and (b) our SparseC-AFM method, which achieves the same operation using data that requires substantially less acquisition time (e.g., under 5 minutes). SparseC-AFM enables efficient extraction of critical material parameters in MoS_2, including film coverage, defect density, and identification of crystalline island boundaries, edges, and cracks. We achieve over 11x reduction in acquisition time compared to manual extraction from a full-resolution C-AFM image. Moreover, we demonstrate that our model-predicted samples exhibit remarkably similar electrical properties to full-resolution data gathered using classic-flow scanning. This work represents a significant step toward translating AI-assisted 2D material characterization from laboratory research to industrial fabrication. Code and model weights are available at github.com/UNITES-Lab/sparse-cafm.

Earlier, in the CINT program at Los Alamos National Laboratory, we focused ultrafast mode-locked lasers on the tip-sample junction of a scanning tunneling microscope to generate currents at hundreds of harmonics of the laser pulse repetition frequency. Each harmonic has a signal-to-noise ratio of 20 dB with a 10-dB linewidth of only 3 Hz. Now we model closed quantum nanocircuits with rectangular, triangular, or delta-function barrier, shunted by a beryllium filament for quasi-coherent electron transport over mean-free paths as great as 68 nm. The time-independent Schrödinger equation is solved with the boundary conditions that the wavefunction and its derivative are continuous at both connections. These four boundary conditions are used to form a four-by-four complex matrix equation with only zeros in the right-hand column vector which is required to have a non-trivial solution with each of the closed nanocircuits. Each model has four parameters: (1) the barrier length, (2) the height and shape of the barrier, (3) the length of the pre-barrier, and (4) the electron energy. Any three of these may be specified and then the fourth is varied to bring the determinant to zero to find the solutions on lines or surfaces in the space defined by the four parameters. First, we use a simplistic model having a rectangular barrier. The second model has a triangular barrier as a first approximation to field emission, and we are considering applying this approach for a self-contained nanoscale extension of our earlier effort to generate the harmonics at Los Alamos. The third model has a delta-function barrier, and the fourth model is an extension of the first one where the width of the rectangular barrier is varied inversely with its height.

The ability to generate 3D multiphase microstructures on-demand with targeted attributes can greatly accelerate the design of advanced materials. Here, we present a conditional latent diffusion model (LDM) framework that rapidly synthesizes high-fidelity 3D multiphase microstructures tailored to user specifications. Using this approach, we generate diverse two-phase and three-phase microstructures at high resolution (volumes of 128 times 128 times 64 voxels, representing >10^6 voxels each) within seconds, overcoming the scalability and time limitations of traditional simulation-based methods. Key design features, such as desired volume fractions and tortuosities, are incorporated as controllable inputs to guide the generative process, ensuring that the output structures meet prescribed statistical and topological targets. Moreover, the framework predicts corresponding manufacturing (processing) parameters for each generated microstructure, helping to bridge the gap between digital microstructure design and experimental fabrication. While demonstrated on organic photovoltaic (OPV) active-layer morphologies, the flexible architecture of our approach makes it readily adaptable to other material systems and microstructure datasets. By combining computational efficiency, adaptability, and experimental relevance, this framework addresses major limitations of existing methods and offers a powerful tool for accelerated materials discovery.

The rapid advancement of perovskite solar cells (PSCs) has led to an exponential growth in research publications, creating an urgent need for efficient knowledge management and reasoning systems in this domain. We present a comprehensive knowledge-enhanced system for PSCs that integrates three key components. First, we develop Perovskite-KG, a domain-specific knowledge graph constructed from 1,517 research papers, containing 23,789 entities and 22,272 relationships. Second, we create two complementary datasets: Perovskite-Chat, comprising 55,101 high-quality question-answer pairs generated through a novel multi-agent framework, and Perovskite-Reasoning, containing 2,217 carefully curated materials science problems. Third, we introduce two specialized large language models: Perovskite-Chat-LLM for domain-specific knowledge assistance and Perovskite-Reasoning-LLM for scientific reasoning tasks. Experimental results demonstrate that our system significantly outperforms existing models in both domain-specific knowledge retrieval and scientific reasoning tasks, providing researchers with effective tools for literature review, experimental design, and complex problem-solving in PSC research.

Computational high-throughput virtual screening is essential for identifying redox-active molecules for sustainable applications such as electrochemical carbon capture. A primary challenge in this approach is the high computational cost associated with accurate quantum chemistry calculations. Machine learning foundation potentials (FPs) trained on extensive density functional theory (DFT) calculations offer a computationally efficient alternative. Here, we benchmark the MACE-OMol-0 and UMA FPs against a hierarchy of DFT functionals for predicting experimental molecular redox potentials for both electron transfer (ET) and proton-coupled electron transfer (PCET) reactions. We find that these FPs achieve exceptional accuracy for PCET processes, rivaling their target DFT method. However, the performance is diminished for ET reactions, particularly for multi-electron transfers involving reactive ions that are underrepresented in the OMol25 training data, revealing a key out-of-distribution limitation. To overcome this, we propose an optimal hybrid workflow that uses the FPs for efficient geometry optimization and thermochemical analysis, followed by a crucial single-point DFT energy refinement and an implicit solvation correction. This pragmatic approach provides a robust and scalable strategy for accelerating high-throughput virtual screening in sustainable chemistry.

Mo2P as a new member of the advancing two-dimensional (2D) materials family has been theoretically identified in this study. We conducted extensive density functional theory calculations to explore the crystal structure, dynamical stability, mechanical response, electronic structure and optical properties. Mo2P was found to be metallic with the Fermi energy locating at the d bands of transition metal Mo. A high reflectivity of ~100% at low energies less than 1 eV was observed, introducing Mo2P as a potential candidate for photonic and optoelectronic applications such as transmitting electromagnetic waves devices. Our calculations confirm that the novel 2D structure is dynamically stable and can withstand at high temperatures including 1000 K. Mo2P was found to yield high tensile strength and elastic modulus of 12 GPa.nm and 56 GPa.nm, respectively. We particularly evaluated the application of Mo2P as an anode material for Li and Na-ion rechargeable batteries.

Accurate spatial prediction of power integrity issues, such as IR drop, is critical for reliable VLSI design. However, traditional simulation-based solvers are computationally expensive and difficult to scale. We address this challenge by reformulating IR drop estimation as a pixel-wise regression task on heterogeneous multi-channel physical maps derived from circuit layouts. Prior learning-based methods treat all input layers (e.g., metal, via, and current maps) equally, ignoring their varying importance to prediction accuracy. To tackle this, we propose a novel Weakness-Aware Channel Attention (WACA) mechanism, which recursively enhances weak feature channels while suppressing over-dominant ones through a two-stage gating strategy. Integrated into a ConvNeXtV2-based attention U-Net, our approach enables adaptive and balanced feature representation. On the public ICCAD-2023 benchmark, our method outperforms the ICCAD-2023 contest winner by reducing mean absolute error by 61.1% and improving F1-score by 71.0%. These results demonstrate that channel-wise heterogeneity is a key inductive bias in physical layout analysis for VLSI.

Ammonia (NH3) is mainly produced through the traditional Haber-Bosch process under harsh conditions with huge energy consumption and massive carbon dioxide (CO2) emission. The nitrogen electroreduction reaction (NERR), as an energy-efficient and environment-friendly process of converting nitrogen (N2) to NH3 under ambient conditions, has been regarded as a promising alternative to the Haber-Bosch process and has received enormous interest in recent years. Although some exciting progress has been made, considerable scientific and technical challenges still exist in improving the NH3 yield rate and Faradic efficiency, understanding the mechanism of the reaction and promoting the wide commercialization of NERR. Single-atom catalysts (SACs) have emerged as promising catalysts because of its atomically dispersed activity sites and maximized atom efficiency, unsaturated coordination environment, and its unique electronic structure, which could significantly improve the rate of reaction and yield rate of NH3. In this review we briefly introduce the unique structural and electronic features of SACs, which contributes to comprehensively understand the reaction mechanism owing to their structural simplicity and diversity, and in turn expedite the rational design of fantastic catalysts at the atomic scale. Then, we summarize the most recent experimental and computational efforts on developing novel SACs with excellent NERR performance, including precious metal-, nonprecious metal- and nonmetal-based SACs. Finally, we present challenges and perspectives of SACs on NERR, as well as some potential means for advanced NERR catalyst.

While many piezoelectric materials are known, there is still great potential to improve on the figures of merit of existing materials through compositional doping, forming solid solutions. Specifically, it has been shown that doping and alloying wurtzite-structured materials can improve the piezoelectric response; however, a vast compositional space has remained unexplored. In this work, we apply a multi-level screening protocol combining machine learning, chemical intuition, and thermodynamics to systematically discover dopant combinations in wurtzite material space that improve the desired piezoelectric response. Through our protocol, we use computationally inexpensive screening calculations to consider more than 3000 possible ternary wurtzite solid solutions from 9 different wurtzite base systems: AlN, BeO, CdS, CdSe, GaN, ZnO, ZnS, ZnSe, and AgI. Finally, based on thermodynamic analysis and explicit piezoelectric response calculations, we predict 11 materials with improved piezoelectric response, due to the incorporation of electropositive dopants.

In 2021 Nature Physics published a paper by Vaitiekenas, Liu, Krogstrup and Marcus titled "Zero-bias peaks at zero magnetic field in ferromagnetic hybrid nanowires". The paper reports low temperature transport measurements on semiconductor InAs nanowires with two partly overlapping shells -- a shell of EuS, a magnetic insulator, and a shell of Al, a metal that becomes superconducting at temperatures below 1.2K. The paper claims that (1) the data are consistent with induced topological superconductivity and Majorana zero modes (MZMs), and (2) that this is facilitated by the breaking of the time reversal symmetry through a direct magnetic interaction with the EuS shell. In this Matters Arising, we present an alternative explanation which is based on trivial effects that are likely to appear in the reported geometry. Specifically, first, we find that data the authors present in support of the topological superconductivity claim can originate from unintended quantum dots in their devices, a widely known likely explanation that is not being discussed in the paper. Second, our analysis of the setup, supported by our numerical micromagnetic simulations, shows similar effects could be obtained due to stray magnetic fields from the region of the EuS shell damaged during Al etching. This basic picture should come before the exotic interpretation in terms of magnetic exchange interaction with a ferromagnetic insulator.

We introduce the use of Crystal Graph Convolutional Neural Networks (CGCNN), Fully Connected Neural Networks (FCNN) and XGBoost to predict thermoelectric properties. The dataset for the CGCNN is independent of Density Functional Theory (DFT) and only relies on the crystal and atomic information, while that for the FCNN is based on a rich attribute list mined from Materialsproject.org. The results show that the optimized FCNN is three layer deep and is able to predict the scattering-time independent thermoelectric powerfactor much better than the CGCNN (or XGBoost), suggesting that bonding and density of states descriptors informed from materials science knowledge obtained partially from DFT are vital to predict functional properties.

The discovery of topological quantum states marks a new chapter in both condensed matter physics and materials sciences. By analogy to spin electronic system, topological concepts have been extended into phonons, boosting the birth of topological phononics (TPs). Here, we present a high-throughput screening and data-driven approach to compute and evaluate TPs among over 10,000 materials. We have clarified 5014 TP materials and classified them into single Weyl, high degenerate Weyl, and nodal-line (ring) TPs. Among them, three representative cases of TPs have been discussed in detail. Furthermore, we suggest 322 TP materials with potential clean nontrivial surface states, which are favorable for experimental characterizations. This work significantly increases the current library of TP materials, which enables an in-depth investigation of their structure-property relations and opens new avenues for future device design related to TPs.

In this work, we demonstrate that an impugn of energy density for sodium chemistries can be prevail through an anode-free architecture enabled by the use of a (nanocarbon/Cobaltoxide) nucleation layer formed on Aluminium current collectors. Electrochemical studies show this configuration to provide highly stable and efficient plating and stripping of sodium metal over a range of currents up to 5 mA/cm2, sodium loading up to 14 mAh/cm2, and with long-term endurance exceeding 1000 cycles at a current of 0.7 mA/cm2. Building upon this anode-free architecture, we demonstrate a full cell using a presodiated pyrite cathode to achieve energy densities of 400 Wh/kg, far surpassing recent reports on SIBs and even the theoretical maximum for LIB technology while still relying on naturally abundant raw materials and cost-effective aqueous processing.

The massive and large-scale design of foundational semiconductor integrated circuits (ICs) is crucial to sustaining the advancement of many emerging and future technologies, such as generative AI, 5G/6G, and quantum computing. Excitingly, recent studies have shown the great capabilities of foundational models in expediting the design of digital ICs. Yet, applying generative AI techniques to accelerate the design of analog ICs remains a significant challenge due to critical domain-specific issues, such as the lack of a comprehensive dataset and effective representation methods for analog circuits. This paper proposes, AnalogGenie, a textbf{Gen}erattextbf{i}ve textbf{e}ngine for automatic design/discovery of textbf{Analog} circuit topologies--the most challenging and creative task in the conventional manual design flow of analog ICs. AnalogGenie addresses two key gaps in the field: building a foundational comprehensive dataset of analog circuit topology and developing a scalable sequence-based graph representation universal to analog circuits. Experimental results show the remarkable generation performance of AnalogGenie in broadening the variety of analog ICs, increasing the number of devices within a single design, and discovering unseen circuit topologies far beyond any prior arts. Our work paves the way to transform the longstanding time-consuming manual design flow of analog ICs to an automatic and massive manner powered by generative AI. Our source code is available at https://github.com/xz-group/AnalogGenie.

Quality of epitaxial films strongly depends on their structural and chemical match with the substrates: the more closely they match, the better the film quality is. Topological insulators (TI) such as Bi2Se3 thin films are of no exception. However, there do not exist commercial substrates that match with TI films both structurally and chemically, at the level commonly available for other electronic materials. Here, we introduce BiInSe3 bulk crystal as the best substrate for Bi2Se3 thin films. These films exhibit superior surface morphology, lower defect density and higher Hall mobility than those on other substrates, due to structural and chemical match provided by the BiInSe3 substrate. BiInSe3 substrate could accelerate the advance of TI research and applications.

High-accuracy microwave sensing is widely demanded in various fields, ranging from cosmology to microwave quantum technology. Quantum receivers based on inorganic solid-state spin systems are promising candidates for such purpose because of the stability and compatibility, but their best sensitivity is currently limited to a few pT/rm{Hz}. Here, by utilising an enhanced readout scheme with the state-of-the-art solid-state maser technology, we develop a robust microwave quantum receiver functioned by organic molecular spins at ambient conditions. Owing to the maser amplification, the sensitivity of the receiver achieves 6.14 pm 0.17 fT/rm{Hz} which exceeds three orders of magnitude than that of the inorganic solid-state quantum receivers. The heterodyne detection without additional local oscillators improves bandwidth of the receiver and allows frequency detection. The scheme can be extended to other solid-state spin systems without complicated control pulses and thus enables practical applications such as electron spin resonance spectroscopy, dark matter searches, and astronomical observations.

Electronic band structure (BS) and crystal structure are the two complementary identifiers of solid state materials. While convenient instruments and reconstruction algorithms have made large, empirical, crystal structure databases possible, extracting quasiparticle dispersion (closely related to BS) from photoemission band mapping data is currently limited by the available computational methods. To cope with the growing size and scale of photoemission data, we develop a pipeline including probabilistic machine learning and the associated data processing, optimization and evaluation methods for band structure reconstruction, leveraging theoretical calculations. The pipeline reconstructs all 14 valence bands of a semiconductor and shows excellent performance on benchmarks and other materials datasets. The reconstruction uncovers previously inaccessible momentum-space structural information on both global and local scales, while realizing a path towards integration with materials science databases. Our approach illustrates the potential of combining machine learning and domain knowledge for scalable feature extraction in multidimensional data.

Light-matter interactions that lead to nonthermal changes in size of the sample constitute a photostrictive effect in many compounds. The photostriction phenomenon was observed in four main groups of materials, ferroelectrics, polar, and non-polar semiconductors, as well as in organic-based materials that are reviewed here. The key mechanisms of photostriction and its dependence on several parameters and perturbations are assessed. The major literature of the photostriction is surveyed, and the review ends with a summary of the proposed technical applications.

Planar metasurfaces can profoundly control electromagnetic scattering. At microwave frequencies, such devices are typically implemented using multilayer cascades of patterned metallic sheets, whose design often requires time-consuming full-wave optimization. Here, we extend analytical models originally developed for sparse loaded-wire metagratings to accurately describe densely packed Jerusalem-cross meta-atoms embedded in standard printed circuit board (PCB) dielectric stacks. The model captures both near- and far-field coupling within and between layers, enabling efficient prediction of the dual-polarized response. Using this framework, we identify highly transmissive meta-atoms whose phase is controlled by the leg lengths of the Jerusalem crosses (microscopic design stage). This (phase)-(leg-length) "lookup table" allows rapid synthesis of Huygens' metasurfaces (macroscopic design stage), demonstrated through a full-wave-validated metalens exhibiting low-reflection beam manipulation. Notably, we implement a judicious scaling method to further extend the model to predict wideband meta-atom responses. In the companion paper (Part II), a hybrid machine-learning approach leverages this semianalytical framework to enhance accuracy without requiring the conventional exhaustive full-wave training, enabling ultrafast inverse design across the full parameter space. Overall, the presented methodology -- the standalone semianlytical scheme (Part I) and the machine-learning enhanced version (Part II) -- establishes an effective open-source toolkit for versatile, rapid, and highly accurate synthesis of fabrication-ready dual-polarized transmissive Huygens' meta-atoms and metasurfaces.

Transition state (TS) structures define the critical geometries and energy barriers underlying chemical reactivity, yet their fleeting nature renders them experimentally elusive and drives the reliance on costly, high-throughput density functional theory (DFT) calculations. Here, we introduce TS-GEN, a conditional flow-matching generative model that maps samples from a simple Gaussian prior directly to transition-state saddle-point geometries in a single, deterministic pass. By embedding both reactant and product conformations as conditioning information, TS-GEN learns to transport latent noise to true TS structures via an optimal-transport path, effectively replacing the iterative optimization common in nudged-elastic band or string-method algorithms. TS-GEN delivers unprecedented accuracy, achieving a root-mean-square deviation of 0.004 mathring{A} (vs. 0.103 mathring{A} for prior state-of-the-art) and a mean barrier-height error of 1.019 {rm kcal/mol} (vs. 2.864 {rm kcal/mol}), while requiring only 0.06 {rm s} GPU time per inference. Over 87% of generated TSs meet chemical-accuracy criteria (<1.58 {rm kcal/mol} error), substantially outpacing existing methods. TS-GEN also exhibits strong transferability to out-of-distribution reactions from a larger database. By uniting sub-angstrom precision, sub-second speed, and broad applicability, TS-GEN will be highly useful for high-throughput exploration of complex reaction networks, paving the way to the exploration of novel chemical reaction mechanisms.

For the first time in the world, we succeeded in synthesizing the room-temperature superconductor (T_c ge 400 K, 127^circC) working at ambient pressure with a modified lead-apatite (LK-99) structure. The superconductivity of LK-99 is proved with the Critical temperature (T_c), Zero-resistivity, Critical current (I_c), Critical magnetic field (H_c), and the Meissner effect. The superconductivity of LK-99 originates from minute structural distortion by a slight volume shrinkage (0.48 %), not by external factors such as temperature and pressure. The shrinkage is caused by Cu^{2+} substitution of Pb^{2+}(2) ions in the insulating network of Pb(2)-phosphate and it generates the stress. It concurrently transfers to Pb(1) of the cylindrical column resulting in distortion of the cylindrical column interface, which creates superconducting quantum wells (SQWs) in the interface. The heat capacity results indicated that the new model is suitable for explaining the superconductivity of LK-99. The unique structure of LK-99 that allows the minute distorted structure to be maintained in the interfaces is the most important factor that LK-99 maintains and exhibits superconductivity at room temperatures and ambient pressure.

Exponential increases in scientific experimental data are outstripping the rate of progress in silicon technology. As a result, heterogeneous combinations of architectures and process or device technologies are increasingly important to meet the computing demands of future scientific experiments. However, the complexity of heterogeneous computing systems requires systematic modeling to understand performance. We present a model which addresses this need by framing key aspects of data collection pipelines and constraints, and combines them with the important vectors of technology that shape alternatives, computing metrics that allow complex alternatives to be compared. For instance, a data collection pipeline may be characterized by parameters such as sensor sampling rates, amount of data collected, and the overall relevancy of retrieved samples. Alternatives to this pipeline are enabled by hardware development vectors including advancing CMOS, GPUs, neuromorphic computing, and edge computing. By calculating metrics for each alternative such as overall F1 score, power, hardware cost, and energy expended per relevant sample, this model allows alternate data collection systems to be rigorously compared. To demonstrate this model's capability, we apply it to the CMS experiment (and planned HL-LHC upgrade) to evaluate and compare the application of novel technologies in the data acquisition system (DAQ). We demonstrate that improvements to early stages in the DAQ are highly beneficial, greatly reducing the resources required at later stages of processing (such as a 60% power reduction) and increasing the amount of relevant data retrieved from the experiment per unit power (improving from 0.065 to 0.31 samples/kJ) However, we predict further advances will be required in order to meet overall power and cost constraints for the DAQ.

Central to our understanding of chemical reactivity is the principle of mass conservation, which is fundamental for ensuring physical consistency, balancing equations, and guiding reaction design. However, data-driven computational models for tasks such as reaction product prediction rarely abide by this most basic constraint. In this work, we recast the problem of reaction prediction as a problem of electron redistribution using the modern deep generative framework of flow matching. Our model, FlowER, overcomes limitations inherent in previous approaches by enforcing exact mass conservation, thereby resolving hallucinatory failure modes, recovering mechanistic reaction sequences for unseen substrate scaffolds, and generalizing effectively to out-of-domain reaction classes with extremely data-efficient fine-tuning. FlowER additionally enables estimation of thermodynamic or kinetic feasibility and manifests a degree of chemical intuition in reaction prediction tasks. This inherently interpretable framework represents a significant step in bridging the gap between predictive accuracy and mechanistic understanding in data-driven reaction outcome prediction.

Catalyst discovery and optimization is key to solving many societal and energy challenges including solar fuels synthesis, long-term energy storage, and renewable fertilizer production. Despite considerable effort by the catalysis community to apply machine learning models to the computational catalyst discovery process, it remains an open challenge to build models that can generalize across both elemental compositions of surfaces and adsorbate identity/configurations, perhaps because datasets have been smaller in catalysis than related fields. To address this we developed the OC20 dataset, consisting of 1,281,040 Density Functional Theory (DFT) relaxations (~264,890,000 single point evaluations) across a wide swath of materials, surfaces, and adsorbates (nitrogen, carbon, and oxygen chemistries). We supplemented this dataset with randomly perturbed structures, short timescale molecular dynamics, and electronic structure analyses. The dataset comprises three central tasks indicative of day-to-day catalyst modeling and comes with pre-defined train/validation/test splits to facilitate direct comparisons with future model development efforts. We applied three state-of-the-art graph neural network models (CGCNN, SchNet, Dimenet++) to each of these tasks as baseline demonstrations for the community to build on. In almost every task, no upper limit on model size was identified, suggesting that even larger models are likely to improve on initial results. The dataset and baseline models are both provided as open resources, as well as a public leader board to encourage community contributions to solve these important tasks.

Collective modes of doped two-dimensional crystalline materials, namely graphene, MoS_2 and phosphorene, both monolayer and bilayer structures, are explored using the density functional theory simulations together with the random phase approximation. The many-body dielectric functions of the materials are calculated using an {\it ab initio} based model involving material-realistic physical properties. Having calculated the electron energy-loss, we calculate the collective modes of each material considering the in-phase and out-of-phase modes for bilayer structures. Furthermore, owing to many band structures and intreband transitions, we also find high-energy excitations in the systems. We explain that the material-specific dielectric function considering the polarizability of the crystalline material such as MoS_2 are needed to obtain realistic plasmon dispersions. For each material studied here, we find different collective modes and describe their physical origins.

It was previously believed that the Bloch electronic states of non-magnetic materials with inversion symmetry cannot have finite spin polarizations. However, since the seminal work by Zhang et al. [Nat. Phys. 10, 387-393 (2014)] on local spin polarizations of Bloch states in non-magnetic, centrosymmetric materials, the scope of spintronics has been significantly broadened. Here, we show, using a framework that is universally applicable independent of whether hidden spin polarizations are small (e.g., diamond, Si, Ge, and GaAs) or large (e.g., MoS2 and WSe2), that the corresponding quantity arising from orbital - instead of spin - degrees of freedom, the hidden orbital polarization, is (i) much more abundant in nature since it exists even without spin-orbit coupling and (ii) more fundamental since the interband matrix elements of the site-dependent orbital angular momentum operator determines the hidden spin polarization. We predict that the hidden spin polarization of transition metal dichalcogenides is reduced significantly upon compression. We suggest experimental signatures of hidden orbital polarization from photoemission spectroscopies and demonstrate that the current-induced hidden orbital polarization may play a far more important role than its spin counterpart in antiferromagnetic information technology by calculating the current-driven antiferromagnetism in compressed silicon.

This work culminates in a demonstration of an alternative Frequency Domain Multiplexing (FDM) scheme for Superconducting Nanowire Single-Photon Detectors (SNSPDs) using the Kinetic inductance Parametric UP-converter (KPUP) made out of NbTiN. There are multiple multiplexing architectures for SNSPDs that are already in use, but FDM could prove superior in applications where the operational bias currents are very low, especially for mid- and far-infrared SNSPDs. Previous FDM schemes integrated the SNSPD within the resonator, while in this work we use an external resonator, which gives more flexibility to optimize the SNSPD architecture. The KPUP is a DC-biased superconducting resonator in which a nanowire is used as its inductive element to enable sensitivity to current perturbations. When coupled to an SNSPD, the KPUP can be used to read out current pulses on the few μA scale. The KPUP is made out of NbTiN, which has high non-linear kinetic inductance for increased sensitivity at higher current bias and high operating temperature. Meanwhile, the SNSPD is made from WSi, which is a popular material for broadband SNSPDs. To read out the KPUP and SNSPD array, a software-defined radio platform and a graphics processing unit are used. Frequency Domain Multiplexed SNSPDs have applications in astronomy, remote sensing, exoplanet science, dark matter detection, and quantum sensing.

Using an evolutionary algorithm in combination with first-principles density functional theory calculations, we identify two-dimensional (2D) CaP_3 monolayer as a new Dirac semimetal due to inversion and nonsymmorphic spatial symmetries of the structure. This new topological material, composed of light elements, exhibits high structural stability (higher than the phase known in the literature), which is confirmed by thermodynamic and kinetic stability analysis. Moreover, it satisfies the electron filling criteria, so that its Dirac state is located near the Fermi level. The existence of the Dirac state predicted by the theoretical symmetry analysis is also confirmed by first-principles electronic band structure calculations. We find that the energy position of the Dirac state can be tuned by strain, while the Dirac state is unstable against an external electric field since it breaks the spatial inversion symmetry. Our findings should be instrumental in the development of 2D Dirac fermions based on light elements for their application in nanoelectronic devices and topological electronics.

This paper reports on a new and swift hydrothermal chemical route to prepare titanate nanostructures (TNS) avoiding the use of crystalline TiO2 as starting material. The synthesis approach uses a commercial solution of TiCl3 as titanium source to prepare an amorphous precursor, circumventing the use of hazardous chemical compounds. The influence of the reaction temperature and dwell autoclave time on the structure and morphology of the synthesised materials was studied. Homogeneous titanate nanotubes with a high length/diameter aspect ratio were synthesised at 160^{\circ}C and 24 h. A band gap of 3.06\pm0.03 eV was determined for the TNS samples prepared in these experimental conditions. This value is red shifted by 0.14 eV compared to the band gap value usually reported for the TiO2 anatase. Moreover, such samples show better adsorption capacity and photocatalytic performance on the dye rhodamine 6G (R6G) photodegradation process than TiO2 nanoparticles. A 98% reduction of the R6G concentration was achieved after 45 minutes of irradiation of a 10 ppm dye aqueous solution and 1 g/L of TNS catalyst.

Altering chemical reactivity and material structure in confined optical environments is on the rise, and yet, a conclusive understanding of the microscopic mechanisms remains elusive. This originates mostly from the fact that accurately predicting vibrational and reactive dynamics for soluted ensembles of realistic molecules is no small endeavor, and adding (collective) strong light-matter interaction does not simplify matters. Here, we establish a framework based on a combination of machine learning (ML) models, trained using density-functional theory calculations, and molecular dynamics to accelerate such simulations. We then apply this approach to evaluate strong coupling, changes in reaction rate constant, and their influence on enthalpy and entropy for the deprotection reaction of 1-phenyl-2-trimethylsilylacetylene, which has been studied previously both experimentally and using ab initio simulations. While we find qualitative agreement with critical experimental observations, especially with regard to the changes in kinetics, we also find differences in comparison with previous theoretical predictions. The features for which the ML-accelerated and ab initio simulations agree show the experimentally estimated kinetic behavior. Conflicting features indicate that a contribution of dynamic electronic polarization to the reaction process is more relevant then currently believed. Our work demonstrates the practical use of ML for polaritonic chemistry, discusses limitations of common approximations and paves the way for a more holistic description of polaritonic chemistry.

Hall-effect thrusters (HETs) are widely used for modern near-earth spacecraft propulsion and are vital for future deep-space missions. Methods of modeling HETs are developing rapidly. However, such methods are not yet precise enough and cannot reliably predict the parameters of a newly designed thruster, mostly due to the enormous computational cost of a HET plasma simulation. Another approach is to use scaling techniques based on available experimental data. This paper proposes an approach for scaling HETs using neural networks and other modern machine learning methods. The new scaling model was built with information from an extensive database of HET parameters collected from published papers. Predictions of the new scaling model are valid for the operating parameters domain covered by the database. During the design, this model can help HET developers estimate the performance of a newly-designed thruster. At the stage of experimental research, the model can be used to compare the achieved characteristics of the studied thruster with the level obtained by other developers. A comparison with the state-of-the-art HET scaling model is also presented.

Atomic layer deposition (ALD) is widely studied for numerous applications and is commercially employed in the semiconductor industry, where planar substrates are the norm. However, the inherent ALD feature of coating virtually any surface geometry with atomistic thickness control is equally attractive for coating particulate materials (supports). In this review, we provide a comprehensive overview of the developments in this decades-old field of ALD on particulate materials, drawing on a bottom-up and quantitative analysis of 799 articles from this field. The obtained dataset is the basis for abstractions regarding reactor types (specifically for particles), coating materials, reactants, supports and processing conditions. Furthermore, the dataset enables direct access to specific processing conditions (for a given material, surface functionality, application etc.) and increases accessibility of the respective literature. We also review fundamental concepts of ALD on particles, and discuss the most common applications, i.e., catalysis (thermo-, electro-, photo-), batteries, luminescent phosphors and healthcare. Finally, we identify historical trends, and provide an outlook on prospective developments.

We discuss the use of tunneling electron current to control and catalyze chemical reactions. Assuming the separation of time scales for electronic and nuclear dynamics we employ the Langevin equation for the reaction coordinate. The Langevin equation contains current-induced forces and is used to define nonequilibrium, effective potential energy surface for current-carrying molecular systems. The current-induced forces are computed via Keldysh nonequilibrium Green's functions. Once the nonequilibrium, current-depended potential energy surface is defined, the chemical reaction is modeled as an escape of a Brownian particle from the potential well. We demonstrate that the barrier between the reactant and the product states can be controlled by the bias voltage. When the molecule is asymmetrically coupled to the electrodes, the reaction can be catalyzed or stopped depending on the polarity of the tunneling current.

The demand for safe, high-energy-density batteries has spotlighted halide solid-state electrolytes, which offer the potential for enhanced ionic mobility, electrochemical stability, and interfacial deformability. Accelerating their discovery requires extensive molecular dynamics, which has been increasingly enabled by universal machine learning interatomic potentials trained on foundational datasets. However, the dynamic softness of halides poses a stringent test of whether general-purpose models can reliably replace first-principles calculations under the highly distorted, elevated-temperature regimes necessary to probe ion transport. Here, we present AQVolt26, a dataset of 322,656 r^2SCAN single-point calculations for lithium halides, generated via high-temperature configurational sampling across sim5K structures. We demonstrate that foundational datasets provide a strong baseline for stable halide chemistries and transfer local forces well, however absolute energy predictions degrade in distorted higher-temperature regimes. Co-training with AQVolt26 resolves this blind spot. Furthermore, incorporating Materials Project relaxation data improves near-equilibrium performance but degrades extreme-strain robustness without enhancing high-temperature force accuracy. These results demonstrate that domain-specific configurational sampling is essential for the reliable dynamic screening of halide electrolytes. Furthermore, our findings suggest that while foundational models provide a robust base, they are most effective for dynamically soft solid-state chemistries when augmented with targeted, high-temperature data. Finally, we show that near-equilibrium relaxation data serves as a task-specific complement rather than a universally beneficial addition.

High-performance DUV spectroscopy drives advancements in biomedical research, clinical diagnosis, and material science. Existing DUV resonant nanostructures face instability and photoluminescent noise challenges. We propose robust Si metasurfaces leveraging polaritonic resonances, a unique property driven by interband transitions, for enhanced nanophotonic sensing. Our polaritonic Kerker-type void metasurface enables double-resonance Raman scattering to analyze 2D semiconductors, improves biomolecule autofluorescence, and offers superior stability. This scalable platform unlocks versatile applications in interdisciplinary DUV spectroscopy and emerging nanomaterials research.

Single-walled carbon nanotubes (SWNTs) are potential materials for future nanoelectronics. Since the electronic and optical properties of SWNTs strongly depend on tube diameter and chirality, obtaining SWNTs with narrow (n,m) chirality distribution by selective growth or chemical separation has been an active area of research. Here, we demonstrate that a new, bimetallic FeRu catalyst affords SWNT growth with narrow diameter and chirality distribution in methane CVD. At 600C, methane CVD on FeRu catalyst produced predominantly (6,5) SWNTs according to Uv-vis-NIR absorption and photoluminescence excitation/emission (PLE) spectroscopic characterization. At 850C, the dominant semiconducting species produced are (8,4), (7,6) and (7,5) SWNTs, with much narrower distributions in diameter and chirality than materials grown by other catalysts. Further, we show that narrow-diameter/chirality growth combined with chemical separation by ion exchange chromatography (IEC) greatly facilitate achieving single-(m,n) SWNT samples, as demonstrated by obtaining highly enriched (8,4) SWNTs with near elimination of metallic SWNTs existing in the as-grown material.

Topological kagome systems have been a topic of great interest in condensed matter physics due totheir unique electronic properties. The vanadium-based kagome materials are particularly intrigu-ing since they exhibit exotic phenomena such as charge density wave (CDW) and unconventionalsuperconductivity. The origin of these electronic instabilities is not fully understood, and the re-cent discovery of a charge density wave in ScV6Sn6provides a new avenue for investigation. In thiswork, we investigate the electronic structure of the novel kagome metal ScV6Sn6using angle resolvedphotoemission spectroscopy (ARPES), scanning tunneling microscopy (STM), and first-principlesdensity functional theory calculations. Our analysis reveals for the first time the temperature-dependent band changes of ScV6Sn6and identifies a new band that exhibits a strong signatureof a structure with CDW below the critical temperature. Further analysis revealed that this newband is due to the surface kagome layer of the CDW structure. In addition, a Lifshitz transition isidentified in the ARPES spectra that is related to the saddle point moving across the Fermi levelat the critical temperature for the CDW formation. This result shows the CDW behavior may alsobe related to nesting of the saddle point, similar to related materials. However, no energy gap is observed at the Fermi level and thus the CDW is not a typical Fermi surface nesting scenario. These results provide new insights into the underlying physics of the CDW in the kagome materials and could have implications for the development of materials with new functionality.

Bosonic cat qubits stabilized with a driven two-photon dissipation are systems with exponentially biased noise, opening the door to low-overhead, fault-tolerant and universal quantum computing. However, current gate proposals for such qubits induce substantial noise of the unprotected type, whose poor scaling with the relevant experimental parameters limits their practical use. In this work, we provide a new perspective on dissipative cat qubits by reconsidering the reservoir mode used to engineer the tailored two-photon dissipation, and show how it can be leveraged to mitigate gate-induced errors. Doing so, we introduce four new designs of high-fidelity and bias-preserving cat qubit gates, and compare them to the prevalent gate methods. These four designs should give a broad overview of gate engineering for dissipative systems with different and complementary ideas. In particular, we propose both already achievable low-error gate designs and longer-term implementations.

The origin of a chemical reaction between two reactant atoms is associated to the activation energy, with the assumption that, high-energy collisions between these atoms, are the ones that overcome the activation energy. Here, we (i) show that a stronger attractive van der Waals (vdW) and electron-ion Coulomb interactions between two polarized atoms are responsible to initiate a chemical reaction, either before or after the collision. We derive this stronger vdW attraction formula exactly using the quasi one-dimensional Drude model within the ionization energy theory and the energy-level spacing renormalization group method. Along the way, we (ii) expose the precise physical mechanism responsible for the existence of a stronger vdW interaction for both long and short distances, and also show how to technically avoid the electron-electron Coulomb repulsion between polarized electrons from these two reactant atoms. Finally, we properly and correctly associate the existence of this stronger attraction to Ramachandran's 'normal limits' (distance shorter than what is allowed by the standard vdW bond) between chemically nonbonded atoms.

The large and chemically diverse GMTKN55 benchmark was used as a training set for parametrizing composite wave function thermochemistry protocols akin to G4(MP2)XK theory (Chan et al, JCTC 2019, 15, 4478-4484). Even after reparametrization, the GMTKN55 WTMAD2 (weighted mean absolute deviation, type 2) for G4(MP2)-XK is actually inferior to that of the best rung-4 DFT functional, wB97M-V. By increasing the basis set for the MP2 part to def2-QZVPPD, we were able to substantially improve performance at modest cost (if an RI-MP2 approximation is made), with WTMAD2 for this G4(MP2)-XK-D method now comparable to the better rung-5 functionals (albeit at greater cost). A three-tier approach with a scaled MP3/def2-TZVPP intermediate step, however, leads to a G4(MP3)-D method that is markedly superior to even the best double hybrids wB97M(2) and revDSD-PBEP86-D4. Evaluating the CCSD(T) component with a triple-zeta, rather than split-valence, basis set yields only a modest further improvement that is incommensurate with the drastic increase in computational cost. G4(MP3)-D and G4(MP2)- XK-D have about 40% better WTMAD2, at similar or lower computational cost, than their counterparts G4 and G4(MP2), respectively: detailed comparison reveals that the difference lies in larger molecules due to basis set incompleteness error. An E2/ {T,Q} extrapolation and a CCSD(T)/def2-TZVP step provided the G4-T method of high accuracy and with just three fitted parameters. Using KS orbitals in MP2 leads to the G4(MP3|KS)-D method, which entirely eliminates the CCSD(T) step and has no steps costlier than scaled MP3; this shows a path forward to further improvements in double-hybrid density functional methods. G4-T-DLPNO, a variant in which post-MP2 corrections are evaluated at the DLPNO- CCSD(T) level, achieves nearly the accuracy of G4-T but is applicable to much larger systems.

Auger electron spectroscopy, a way of characterizing electronic structure through core-level decay processes, is widely used in materials characterization; however direct calculation from molecular geometry requires accurate treatment of many excited states, posing a challenge for classical methods. We present a hybrid quantum-classical workflow for calculating Auger spectra that combines the generative quantum eigensolver (GQE) for ground-state preparation, the quantum self-consistent equation-of-motion method for excited-state calculations, and the one-centre approximation for Auger transition rates. GQE uses a GPT-2 model to generate quantum circuits for ground-state optimization, allowing our workflow to benefit from HPC parallelization and GPU-acceleration for favourable scaling with system size. We demonstrate the validity of our workflow by calculating the Auger spectrum of water with the STO-3G basis set and demonstrating qualitative and quantitative agreement with spectra obtained using completely classical full configuration interaction calculations, from the computational literature, and from the experimental literature. We also find that for water, substituting the variational quantum eigensolver (VQE) for GQE results in near-identical spectra, but that the ground state estimator generated by GQE contains about half the total gate count as that generated by VQE.

Among a huge variety of known two-dimensional materials, some of them have anisotropic crystal structures; examples include so different systems as a few-layer black phoshphorus (phosphorene), beryllium nitride BeN_4, van der Waals magnet CrSBr, rhenium dichalgogenides ReX_2. As a consequence, their optical and electronic properties turn out to be highly anisotropic as well. In some cases, the anisotropy results not just in a smooth renormalization of observable properties in comparison with the isotropic case but in the appearance of dramatically new physics. The examples are hyperbolic plasmons and excitons, strongly anisotropic ordering of adatoms at the surface of two-dimensional or van der Waals materials, essential change of transport and superconducting properties. Here, we present a systematic review of electronic structure, transport and optical properties of several representative groups of anisotropic two-dimensional materials including semiconductors, anisotropic Dirac and semi-Dirac materials, as well as superconductors.

We prepared Na_xTO_2 (T = Mn, Co) nanostructures to use as cathode material in Na-ion batteries. The Rietveld refinement of x-ray diffraction data confirms the hexagonal symmetry. Scanning and transmission electron microscopy measurements show hexagonal and rod-shape morphology for T = Co and Mn, respectively. The magnetic measurements indicate the presence of variable oxidation states of Mn/Co ions, but no long range ordering till 5~K. We find that the Na_{0.6}MnO_2 is highly insulating whereas Na_{0.7}CoO_2 is semiconducting in nature. The conduction in Na_{0.7}CoO_2 takes place through both variable range hopping (VRH) as well as activation mechanisms in different temperature ranges. However, for Na_{0.6}MnO_2 the VRH prevails at elevated temperatures. Furthermore, the coin cells have been fabricated and tested the electrochemical behavior using cyclic voltammetry, which confirms the reversibility of Na--ions during intercalation/de-intercalation.

We present the design of a flexible quantum-chemical method development framework, which supports employing any type of basis function. This design has been implemented in the light-weight program package molsturm, yielding a basis-function-independent self-consistent field scheme. Versatile interfaces, making use of open standards like python, mediate the integration of molsturm with existing third-party packages. In this way both rapid extension of the present set of methods for electronic structure calculations as well as adding new basis function types can be readily achieved. This makes molsturm well-suitable for testing novel approaches for discretising the electronic wave function and allows comparing them to existing methods using the same software stack. This is illustrated by two examples, an implementation of coupled-cluster doubles as well as a gradient-free geometry optimisation, where in both cases, an arbitrary basis functions could be used. molsturm is open-source and can be obtained from https://molsturm.org.

The presence of point defects such as vacancies plays an important role in material design. Here, we demonstrate that a graph neural network (GNN) model trained only on perfect materials can also be used to predict vacancy formation energies (E_{vac}) of defect structures without the need for additional training data. Such GNN-based predictions are considerably faster than density functional theory (DFT) calculations with reasonable accuracy and show the potential that GNNs are able to capture a functional form for energy predictions. To test this strategy, we developed a DFT dataset of 508 E_{vac} consisting of 3D elemental solids, alloys, oxides, nitrides, and 2D monolayer materials. We analyzed and discussed the applicability of such direct and fast predictions. We applied the model to predict 192494 E_{vac} for 55723 materials in the JARVIS-DFT database.

Large-scale datasets have enabled highly accurate machine learning interatomic potentials (MLIPs) for general-purpose heterogeneous catalysis modeling. There are, however, some limitations in what can be treated with these potentials because of gaps in the underlying training data. To extend these capabilities, we introduce AQCat25, a complementary dataset of 13.5 million density functional theory (DFT) single point calculations designed to improve the treatment of systems where spin polarization and/or higher fidelity are critical. We also investigate methodologies for integrating new datasets, such as AQCat25, with the broader Open Catalyst 2020 (OC20) dataset to create spin-aware models without sacrificing generalizability. We find that directly tuning a general model on AQCat25 leads to catastrophic forgetting of the original dataset's knowledge. Conversely, joint training strategies prove effective for improving accuracy on the new data without sacrificing general performance. This joint approach introduces a challenge, as the model must learn from a dataset containing both mixed-fidelity calculations and mixed-physics (spin-polarized vs. unpolarized). We show that explicitly conditioning the model on this system-specific metadata, for example by using Feature-wise Linear Modulation (FiLM), successfully addresses this challenge and further enhances model accuracy. Ultimately, our work establishes an effective protocol for bridging DFT fidelity domains to advance the predictive power of foundational models in catalysis.

High throughput experimentation tools, machine learning (ML) methods, and open material databases are radically changing the way new materials are discovered. From the experimentally driven approach in the past, we are moving quickly towards the artificial intelligence (AI) driven approach, realizing the 'inverse design' capabilities that allow the discovery of new materials given the desired properties. This review aims to discuss different principles of AI-driven generative models that are applicable for materials discovery, including different materials representations available for this purpose. We will also highlight specific applications of generative models in designing new catalysts, semiconductors, polymers, or crystals while addressing challenges such as data scarcity, computational cost, interpretability, synthesizability, and dataset biases. Emerging approaches to overcome limitations and integrate AI with experimental workflows will be discussed, including multimodal models, physics informed architectures, and closed-loop discovery systems. This review aims to provide insights for researchers aiming to harness AI's transformative potential in accelerating materials discovery for sustainability, healthcare, and energy innovation.