Daily Papers

Large-Area Picosecond Photo-Detectors (LAPPDs) show great potential for expanding the performance envelope of Micro-Channel Plates (MCPs) to areas of up to 20 x 20 cm and larger. Such scaling introduces new challenges, including how to meet the electronics readout burden of ever larger area MCPs. One solution is to replace the traditional grid anode used for readout with a microwave stripline anode, thus allowing the channel count to scale with MCP width rather than area. However, stripline anodes introduce new issues not commonly dealt with in grid-anodes, especially as their length increases. One of these issues is the near simultaneous arrival of multiple photons on the detector, creating possible confusion about how to reconstruct their arrival times and positions. We propose a maximum a posteriori solution to the problem and verify its performance in simulated scintillator and water-Cherenkov detectors.

We present the development of the miniTimeCube (mTC), a novel compact neutrino detector. The mTC is a multipurpose detector, aiming to detect not only neutrinos but also fast/thermal neutrons. Potential applications include the counterproliferation of nuclear materials and the investigation of antineutrino short-baseline effects. The mTC is a plastic 0.2% ^{10}B - doped scintillator (13 cm)^3 cube surrounded by 24 Micro-Channel Plate (MCP) photon detectors, each with an 8times8 anode totaling 1536 individual channels/pixels viewing the scintillator. It uses custom-made electronics modules which mount on top of the MCPs, making our detector compact and able to both distinguish different types of events and reject noise in real time. The detector is currently deployed and being tested at the National Institute of Standards and Technology (NIST) Center for Neutron Research (NCNR) nuclear reactor (20 MW_th) in Gaithersburg, MD. A shield for further tests is being constructed, and calibration and upgrades are ongoing. The mTC's improved spatiotemporal resolution will allow for determination of incident particle directions beyond previous capabilities.

Capillary-driven transport offers a simple, self-sustained alternative to externally pumped microfluidic systems, yet achieving precise control of such flows remains challenging. We experimentally and theoretically investigate capillary flow in rectangular microchannels when a liquid meniscus encounters a geometric step with varying channel width and height. Depending on the contact angle and step dimensions, the meniscus either pins or advances, defining distinct flow and no-flow regimes. Introducing a lateral offset between channel sidewalls provides an additional geometric control that enables reversible switching from a pinned to a flowing state, even for liquids with relatively high contact angles. We rationalize these transitions using numerical simulations and an energy-based scaling model that captures the balance between surface tension and Laplace pressure at the step. Finally, we demonstrate synchronization of capillary fronts in parallel microchannels by combining stepped and offset geometries. These results establish a simple, geometry-mediated mechanism for passive control and synchronization of capillary flows, expanding the design space for microfluidic systems.

Recent advances in video generation have opened new avenues for macroscopic simulation of complex dynamic systems, but their application to microscopic phenomena remains largely unexplored. Microscale simulation holds great promise for biomedical applications such as drug discovery, organ-on-chip systems, and disease mechanism studies, while also showing potential in education and interactive visualization. In this work, we introduce MicroWorldBench, a multi-level rubric-based benchmark for microscale simulation tasks. MicroWorldBench enables systematic, rubric-based evaluation through 459 unique expert-annotated criteria spanning multiple microscale simulation task (e.g., organ-level processes, cellular dynamics, and subcellular molecular interactions) and evaluation dimensions (e.g., scientific fidelity, visual quality, instruction following). MicroWorldBench reveals that current SOTA video generation models fail in microscale simulation, showing violations of physical laws, temporal inconsistency, and misalignment with expert criteria. To address these limitations, we construct MicroSim-10K, a high-quality, expert-verified simulation dataset. Leveraging this dataset, we train MicroVerse, a video generation model tailored for microscale simulation. MicroVerse can accurately reproduce complex microscale mechanism. Our work first introduce the concept of Micro-World Simulation and present a proof of concept, paving the way for applications in biology, education, and scientific visualization. Our work demonstrates the potential of educational microscale simulations of biological mechanisms. Our data and code are publicly available at https://github.com/FreedomIntelligence/MicroVerse

We present microlux, which is a Jax-based code that can compute the binary microlensing light curve and its derivatives both efficiently and accurately. The key feature of microlux is the implementation of a modified version of the adaptive sampling algorithm that was originally proposed by V. Bozza to account for the finite-source effect most efficiently. The efficiency and accuracy of microlux have been verified across the relevant parameter space for binary microlensing. As a differentiable code, microlux makes it possible to apply gradient-based algorithms to the search and posterior estimation of the microlensing modeling. As an example, we use microlux to model a real microlensing event and infer the model posterior via both Fisher information matrix and Hamiltonian Monte Carlo, neither of which would have been possible without the access to accurate model gradients.

The ability to generate 3D multiphase microstructures on-demand with targeted attributes can greatly accelerate the design of advanced materials. Here, we present a conditional latent diffusion model (LDM) framework that rapidly synthesizes high-fidelity 3D multiphase microstructures tailored to user specifications. Using this approach, we generate diverse two-phase and three-phase microstructures at high resolution (volumes of 128 times 128 times 64 voxels, representing >10^6 voxels each) within seconds, overcoming the scalability and time limitations of traditional simulation-based methods. Key design features, such as desired volume fractions and tortuosities, are incorporated as controllable inputs to guide the generative process, ensuring that the output structures meet prescribed statistical and topological targets. Moreover, the framework predicts corresponding manufacturing (processing) parameters for each generated microstructure, helping to bridge the gap between digital microstructure design and experimental fabrication. While demonstrated on organic photovoltaic (OPV) active-layer morphologies, the flexible architecture of our approach makes it readily adaptable to other material systems and microstructure datasets. By combining computational efficiency, adaptability, and experimental relevance, this framework addresses major limitations of existing methods and offers a powerful tool for accelerated materials discovery.

This study investigates the hydrodynamics of droplet formation in a T-shaped cylindrical microfluidic device using micro-PIV experiments and CFD simulations. Devices of 150 micro-m internal diameter were fabricated from PDMS via a cost-effective embedded templating method. Flow visualization was conducted using immiscible silicone oil and deionized water, forming water-in-oil droplets. A mathematical model coupling the Navier-Stokes and conservative level-set equations was solved using the finite element method. Detailed flow fields (velocity, pressure, and phase distribution) were obtained over a wide range of flow-rate ratios (0.1-10) and capillary numbers (0.001-0.1) to characterize droplet formation mechanisms. Phase evolution revealed distinct breakup stages (lag, filling, necking, and pinch-off) and multiple regimes (squeezing, dripping, sausage flow, and parallel flow with tip streaming). A regime map delineating droplet and non-droplet regions was developed. Droplet size, curvature, and internal flow profiles exhibited strong dependence on Ca and Qr. Scaling analysis showed linear dependence of droplet size on Qr in the squeezing regime, with curvature nearly independent of Qr. In contrast, both size and curvature followed power-law dependence on Ca and Qr in the dripping regime. Velocity fields inside droplets were laminar and parabolic in the core. Fully developed plug-like profiles appeared in squeezing, whereas front and rear regions remained developing in dripping. Correlations for droplet length, curvature, and film thickness, including a novel thin-film model incorporating visco-inertial and capillary effects, enable predictive design within the studied range. These findings advance fundamental understanding of confined droplet dynamics and provide quantitative guidelines for optimizing droplet-based microfluidic systems.

Recovering the physical attributes of an object's appearance from its images captured under an unknown illumination is challenging yet essential for photo-realistic rendering. Recent approaches adopt the emerging implicit scene representations and have shown impressive results.However, they unanimously adopt a surface-based representation,and hence can not well handle scenes with very complex geometry, translucent object and etc. In this paper, we propose to conduct inverse volume rendering, in contrast to surface-based, by representing a scene using microflake volume, which assumes the space is filled with infinite small flakes and light reflects or scatters at each spatial location according to microflake distributions. We further adopt the coordinate networks to implicitly encode the microflake volume, and develop a differentiable microflake volume renderer to train the network in an end-to-end way in principle.Our NeMF enables effective recovery of appearance attributes for highly complex geometry and scattering object, enables high-quality relighting, material editing, and especially simulates volume rendering effects, such as scattering, which is infeasible for surface-based approaches.