Daily Papers

Large Language Models (LLMs) have reshaped the landscape of artificial intelligence by demonstrating exceptional performance across various tasks. However, substantial computational requirements make their deployment challenging on devices with limited resources. Recently, compression methods using low-rank matrix techniques have shown promise, yet these often lead to degraded accuracy or introduce significant overhead in parameters and inference latency. This paper introduces Modular Decomposition (MoDeGPT), a novel structured compression framework that does not need recovery fine-tuning while resolving the above drawbacks. MoDeGPT partitions the Transformer block into modules comprised of matrix pairs and reduces the hidden dimensions via reconstructing the module-level outputs. MoDeGPT is developed based on a theoretical framework that utilizes three well-established matrix decomposition algorithms -- Nystr\"om approximation, CR decomposition, and SVD -- and applies them to our redefined transformer modules. Our comprehensive experiments show MoDeGPT, without backward propagation, matches or surpasses previous structured compression methods that rely on gradient information, and saves 98% of compute costs on compressing a 13B model. On Llama-2/3 and OPT models, MoDeGPT maintains 90-95% zero-shot performance with 25-30% compression rates. Moreover, the compression can be done on a single GPU within a few hours and increases the inference throughput by up to 46%.

The development of advanced diagnostic systems to measure and optimize emerging energetic material performance is critical for the defeat of Chemical Warfare Agents (CWA). This study presents an integrated multi-spectroscopic approach to monitor the interaction between a CWA simulant, Diisopropyl Methyl Phosphonate (DIMP), and combusting composite metal particles. A custom benchtop Polygonal Rotating Mirror Infrared Spectrometer (PRiMIRS), equipped with a customizable experimental chamber, is employed to observe DIMP decomposition. Tunable Diode Laser Absorption Spectroscopy (TDLAS) is used to measure path-averaged gas temperature profiles during combustion. In the experiment, the chamber is preheated to evaporate liquid DIMP. Various composite metal powders (Al-8Mg):3Zr, (Al-8Mg):Zr, 2(Al-8Mg):Zr, and 4(Al-8Mg):Zr are placed on a stainless steel mount and ignited using 3Al-2Ni sputter-deposited nanolayered foils. The combusting metal particles mix with the DIMP vapor, initiating chemical and thermal interactions. PRiMIRS captures DIMP spectral evolution, while TDLAS simultaneously monitors gas temperature. A spectral defeat parameter was developed to enable quantitative real-time assessment of the DIMP destruction. It uses infrared light absorption by both from DIMP and its immediate decomposition products Isopropyl Methyl Phosphonate (IMP) and Isopropyl Alcohol (IPA). Fourier Transform Infrared Spectroscopy (FTIR) serves as a secondary verification tool quantifying the decomposition products over extended timeframes, and Transmission Electron Microscopy (TEM) confirms the expected metal oxide dispersion within the reaction space. This study reports variability in DIMP defeat as a function of metal powder stoichiometry, metal powder loading, and path-averaged gas temperature profiles, offering critical insights into optimizing reactive materials for effective CWA neutralization.

We successfully synthesized a novel intermetallic compound rm CrFe_2Ge_2 with the rm Fe_{13}Ge_{8}-type crystal structure. A structural study is presented combining single-crystal X-ray diffraction and Mössbauer spectroscopy analysis, confirming the presence of two distinct Fe sublattices. rm CrFe_2Ge_2 exhibits a metallic ferromagnetic state with T_C approx rm 200~K. This material does not follow the usual M^2 propto H/M Arrott law, rather a modified Arrott law is obeyed in this material. The critical exponents determined from detailed analysis of modified Arrott plots were found to be β= 0.392, γ= 1.309 and δ= 4.26 obtained from the critical isotherm at T_{rm C} =rm 200~K. Self-consistency and reliability of the critical exponent analysis were verified by the Widom scaling law and scaling equations. Using the results from renormalization group calculation, the critical behavior of rm CrFe_2Ge_2 is akin to that of a d=3, n=3 ferromagnet in which the magnetic exhange distance is found to decay as J(r) approx r^{-4.86} with long-range magnetic coupling. The evaluated Rhodes-Wohlfarth ratio of sim 3 points to an itinerant ferromagnetic ground state. Low-temperature measurements of resistivity, p(T), and specific heat, C_P(T), reveal a pronounced contribution from electron-magnon scattering.

Estimating composition dependent diffusion coefficients in multicomponent alloys was a longstanding challenge due to limitations in experimental methods. In this study, we have first demonstrated a strategic design of producing only three diffusion couples to estimate all types, that is tracer, intrinsic, and interdiffusion coefficients at the Kirkendall marker planes. This establishes a systematic variation of diffusion coefficients with composition in a very wide composition range of the NiCoFeCrMn system in comparison to the data available on impurity diffusion coefficients in pure elements and tracer diffusion coefficients at the equiatomic composition estimated by the radiotracer method. Following, a physics-informed Neural Network based numerical inverse method is developed to extract composition-dependent diffusivities over the whole composition range of the diffusion couples.

Proposed as blanket structural materials for fusion power reactors, reduced activation ferritic/martensitic (RAFM) steel undergoes volume expanding and contracting in a cyclic mode under service environment. Particularly, being subjected to significant fluxes of fusion neutrons RAFM steel suffers considerable local volume variations in the radiation damage involved regions. It is necessary to study the structure properties of the alloying elements in contraction and expansion states. In this paper we studied local substitution structures of thirteen alloying elements Al, Co, Cr, Cu, Mn, Mo, Nb, Ni, Si, Ta, Ti, V, and W in bcc Fe and calculated their substitutional energies in the volume variation range from -1.0% to 1.0%. From the structure relaxation results of the first five neighbor shells around the substitutional atom we find the relaxation in each neighbor shell keeps approximately uniform within the volume variation from -1.0% to 1.0% except those of Mn and the relaxation of the fifth neighbor shell is stronger than that of the third and forth, indicating that the lattice distortion due to the substitution atom is easier to spread in <111> direction than in other direction. The relaxation pattern and intensity are related to the size and electron structure of the substitutional atom. For some alloying elements, such as Mo, Nb, Ni, Ta, Ti and W, the substitutional energy decreases noticeably when the volume increases. Further analysis show that the substitutional energy comprises the energy variation originated from local structure relaxation and the chemical potential difference of the substitutional atom between its elemental crystalline state and the solid solution phase in bcc Fe. We think the approximately uniform relaxation of each neighbor shell around a substitutional atom give rise to a linear decrease in the substitutional energy with the increasing volume.

Solar photospheric abundances and CI-chondrite compositions are reviewed and updated to obtain representative solar system abundances of the elements and their isotopes. The new photospheric abundances obtained here lead to higher solar metallicity. Full 3D NLTE photospheric analyses are only available for 11 elements. A quality index for analyses is introduced. For several elements, uncertainties remain large. Protosolar mass fractions are H (X = 0.7060), He (Y = 0.2753), and for metals Li to U (Z = 0.0187). The protosolar (C+N)/H agrees within 13% with the ratio for the solar core from the Borexino experiment. Elemental abundances in CI-chondrites were screened by analytical methods, sample sizes, and evaluated using concentration frequency distributions. Aqueously mobile elements (e.g., alkalis, alkaline earths, etc.) often deviate from normal distributions indicating mobilization and/or sequestration into carbonates, phosphates, and sulfates. Revised CI-chondrite abundances of non-volatile elements are similar to earlier estimates. The moderately volatile elements F and Sb are higher than before, as are C, Br and I, whereas the CI-abundances of Hg and N are now significantly lower. The solar system nuclide distribution curves of s-process elements agree within 4% with s-process predictions of Galactic chemical evolution models. P-process nuclide distributions are assessed. No obvious correlation of CI-chondritic to solar elemental abundance ratios with condensation temperatures is observed, nor is there one for ratios of CI-chondrites/solar wind abundances.

The study demonstrates the capabilities of a vector-based approach for calculating stoichiometric coefficients in chemical equations, using black powder as an illustrative example. A method is proposed for selecting and constraining intermediate interactions between reactants, as well as for identifying final products. It is shown that even a small number of components can lead to a large number of final and intermediate products. Through concrete calculations, a correlation is established between the number of possible chemical equations and the number of reactants. A methodology is proposed for computing all possible chemical equations within a reaction system for arbitrary component ratios, enabling the derivation of all feasible chemical reactions. Additionally, a method is developed for calculating the chemical composition for a fixed set of reactants, allowing for the evaluation of the set of products resulting from all possible chemical interactions given a specified initial composition.

Technologies that function at room temperature often require magnets with a high Curie temperature, T_C, and can be improved with better materials. Discovering magnetic materials with a substantial T_C is challenging because of the large number of candidates and the cost of fabricating and testing them. Using the two largest known data sets of experimental Curie temperatures, we develop machine-learning models to make rapid T_C predictions solely based on the chemical composition of a material. We train a random forest model and a k-NN one and predict on an initial dataset of over 2,500 materials and then validate the model on a new dataset containing over 3,000 entries. The accuracy is compared for multiple compounds' representations ("descriptors") and regression approaches. A random forest model provides the most accurate predictions and is not improved by dimensionality reduction or by using more complex descriptors based on atomic properties. A random forest model trained on a combination of both datasets shows that cobalt-rich and iron-rich materials have the highest Curie temperatures for all binary and ternary compounds. An analysis of the model reveals systematic error that causes the model to over-predict low-T_C materials and under-predict high-T_C materials. For exhaustive searches to find new high-T_C materials, analysis of the learning rate suggests either that much more data is needed or that more efficient descriptors are necessary.

Many environmental remediation and energy applications (conversion and storage) for sustainability need design and development of green novel materials. Discovery processes of such novel materials are time taking and cumbersome due to large number of possible combinations and permutations of materials structures. Often theoretical studies based on Density Functional Theory (DFT) and other theories, coupled with Simulations are conducted to narrow down sample space of candidate materials, before conducting laboratory-based synthesis and analytical process. With the emergence of artificial intelligence (AI), AI techniques are being tried in this process too to ease out simulation time and cost. However tremendous values of previously published research from various parts of the world are still left as labor-intensive manual effort and discretion of individual researcher and prone to human omissions. AIMS-EREA is our novel framework to blend best of breed of Material Science theory with power of Generative AI to give best impact and smooth and quickest discovery of material for sustainability. This also helps to eliminate the possibility of production of hazardous residues and bye-products of the reactions. AIMS-EREA uses all available resources -- Predictive and Analytical AI on large collection of chemical databases along with automated intelligent assimilation of deep materials knowledge from previously published research works through Generative AI. We demonstrate use of our own novel framework with an example, how this framework can be successfully applied to achieve desired success in development of thermoelectric material for waste heat conversion.

Growing waste streams and the transition to a circular economy require efficient automated waste sorting. In industrial settings, materials move on fast conveyor belts, where reliable identification and ejection demand pixel-accurate segmentation. RGB imaging delivers high-resolution spatial detail, which is essential for accurate segmentation, but it confuses materials that look similar in the visible spectrum. Hyperspectral imaging (HSI) provides spectral signatures that separate such materials, yet its lower spatial resolution limits detail. Effective waste sorting therefore needs methods that fuse both modalities to exploit their complementary strengths. We present Bidirectional Cross-Attention Fusion (BCAF), which aligns high-resolution RGB with low-resolution HSI at their native grids via localized, bidirectional cross-attention, avoiding pre-upsampling or early spectral collapse. BCAF uses two independent backbones: a standard Swin Transformer for RGB and an HSI-adapted Swin backbone that preserves spectral structure through 3D tokenization with spectral self-attention. We also analyze trade-offs between RGB input resolution and the number of HSI spectral slices. Although our evaluation targets RGB-HSI fusion, BCAF is modality-agnostic and applies to co-registered RGB with lower-resolution, high-channel auxiliary sensors. On the benchmark SpectralWaste dataset, BCAF achieves state-of-the-art performance of 76.4% mIoU at 31 images/s and 75.4% mIoU at 55 images/s. We further evaluate a novel industrial dataset: K3I-Cycling (first RGB subset already released on Fordatis). On this dataset, BCAF reaches 62.3% mIoU for material segmentation (paper, metal, plastic, etc.) and 66.2% mIoU for plastic-type segmentation (PET, PP, HDPE, LDPE, PS, etc.).

Statistics of grain sizes and orientations in metals correlate to the material's mechanical properties. Reproducing representative volume elements for further analysis of deformation and failure in metals, like 316L stainless steel, is particularly important due to their wide use in manufacturing goods today. Two approaches, initially created for video games, were considered for the procedural generation of representative grain microstructures. The first is the Wave Function Collapse (WFC) algorithm, and the second is constraint propagation and probabilistic inference through Markov Junior, a free and open-source software. This study aimed to investigate these two algorithms' effectiveness in using reference electron backscatter diffraction (EBSD) maps and recreating a statistically similar one that could be used in further research. It utilized two stainless steel EBSD maps as references to test both algorithms. First, the WFC algorithm was too constricting and, thus, incapable of producing images that resembled EBSDs. The second, MarkovJunior, was much more effective in creating a Voronoi tessellation that could be used to create an EBSD map in Python. When comparing the results between the reference and the generated EBSD, we discovered that the orientation and volume fractions were extremely similar. With the study, it was concluded that MarkovJunior is an effective machine learning tool that can reproduce representative grain microstructures.