Daily Papers

Flight trajectory prediction is a critical time series task in aviation. While deep learning methods have shown significant promise, the application of large language models (LLMs) to this domain remains underexplored. This study pioneers the use of LLMs for flight trajectory prediction by reframing it as a language modeling problem. Specifically, We extract features representing the aircraft's position and status from ADS-B flight data to construct a prompt-based dataset, where trajectory waypoints are converted into language tokens. The dataset is then employed to fine-tune LLMs, enabling them to learn complex spatiotemporal patterns for accurate predictions. Comprehensive experiments demonstrate that LLMs achieve notable performance improvements in both single-step and multi-step predictions compared to traditional methods, with LLaMA-3.1 model achieving the highest overall accuracy. However, the high inference latency of LLMs poses a challenge for real-time applications, underscoring the need for further research in this promising direction.

We present a dataset of several fault types in control surfaces of a fixed-wing Unmanned Aerial Vehicle (UAV) for use in Fault Detection and Isolation (FDI) and Anomaly Detection (AD) research. Currently, the dataset includes processed data for 47 autonomous flights with 23 sudden full engine failure scenarios and 24 scenarios for seven other types of sudden control surface (actuator) faults, with a total of 66 minutes of flight in normal conditions and 13 minutes of post-fault flight time. It additionally includes many hours of raw data of fully-autonomous, autopilot-assisted and manual flights with tens of fault scenarios. The ground truth of the time and type of faults is provided in each scenario to enable evaluation of the methods using the dataset. We have also provided the helper tools in several programming languages to load and work with the data and to help the evaluation of a detection method using the dataset. A set of metrics is proposed to help to compare different methods using the dataset. Most of the current fault detection methods are evaluated in simulation and as far as we know, this dataset is the only one providing the real flight data with faults in such capacity. We hope it will help advance the state-of-the-art in Anomaly Detection or FDI research for Autonomous Aerial Vehicles and mobile robots to enhance the safety of autonomous and remote flight operations further. The dataset and the provided tools can be accessed from https://doi.org/10.1184/R1/12707963.

Air traffic trajectory recognition has gained significant interest within the air traffic management community, particularly for fundamental tasks such as classification and clustering. This paper introduces Aircraft Trajectory Segmentation-based Contrastive Coding (ATSCC), a novel self-supervised time series representation learning framework designed to capture semantic information in air traffic trajectory data. The framework leverages the segmentable characteristic of trajectories and ensures consistency within the self-assigned segments. Intensive experiments were conducted on datasets from three different airports, totaling four datasets, comparing the learned representation's performance of downstream classification and clustering with other state-of-the-art representation learning techniques. The results show that ATSCC outperforms these methods by aligning with the labels defined by aeronautical procedures. ATSCC is adaptable to various airport configurations and scalable to incomplete trajectories. This research has expanded upon existing capabilities, achieving these improvements independently without predefined inputs such as airport configurations, maneuvering procedures, or labeled data.

Flight trajectory data plays a vital role in the traffic management community, especially for downstream tasks such as trajectory prediction, flight recognition, and anomaly detection. Existing works often utilize handcrafted features and design models for different tasks individually, which heavily rely on domain expertise and are hard to extend. We argue that different flight analysis tasks share the same useful features of the trajectory. Jointly learning a unified representation for flight trajectories could be beneficial for improving the performance of various tasks. However, flight trajectory representation learning (TRL) faces two primary challenges, \ie unbalanced behavior density and 3D spatial continuity, which disable recent general TRL methods. In this paper, we propose Flight2Vec , a flight-specific representation learning method to address these challenges. Specifically, a behavior-adaptive patching mechanism is used to inspire the learned representation to pay more attention to behavior-dense segments. Moreover, we introduce a motion trend learning technique that guides the model to memorize not only the precise locations, but also the motion trend to generate better representations. Extensive experimental results demonstrate that Flight2Vec significantly improves performance in downstream tasks such as flight trajectory prediction, flight recognition, and anomaly detection.

The increasing adoption of synthetic data in aviation research offers a promising solution to data scarcity and confidentiality challenges. This study investigates the potential of generative models to produce realistic synthetic flight data and evaluates their quality through a comprehensive four-stage assessment framework. The need for synthetic flight data arises from their potential to serve as an alternative to confidential real-world records and to augment rare events in historical datasets. These enhanced datasets can then be used to train machine learning models that predict critical events, such as flight delays, cancellations, diversions, and turnaround times. Two generative models, Tabular Variational Autoencoder (TVAE) and Gaussian Copula (GC), are adapted to generate synthetic flight information and compared based on their ability to preserve statistical similarity, fidelity, diversity, and predictive utility. Results indicate that while GC achieves higher statistical similarity and fidelity, its computational cost hinders its applicability to large datasets. In contrast, TVAE efficiently handles large datasets and enables scalable synthetic data generation. The findings demonstrate that synthetic data can support flight delay prediction models with accuracy comparable to those trained on real data. These results pave the way for leveraging synthetic flight data to enhance predictive modeling in air transportation.

Flight delay prediction has become a key focus in air traffic management, as delays highlight inefficiencies that impact overall network performance. This paper presents a lightweight large language model-based multimodal flight delay prediction, formulated from the perspective of air traffic controllers monitoring aircraft delay after entering the terminal area. The approach integrates trajectory representations with textual aeronautical information, including flight information, weather reports, and aerodrome notices, by adapting trajectory data into the language modality to capture airspace conditions. The experiments show that the model consistently achieves sub-minute prediction error by effectively leveraging contextual information related to the sources of delay, fulfilling the operational standard for minute-level precision. The framework demonstrates that linguistic understanding, when combined with cross-modality adaptation of trajectory data, enhances delay prediction. Moreover, the approach shows practicality and potential scalability for real-world operations, supporting real-time updates that refine predictions upon receiving new operational information.

The expansion of the low-altitude economy has underscored the significance of Low-Altitude Network Coverage (LANC) prediction for designing aerial corridors. While accurate LANC forecasting hinges on the antenna beam patterns of Base Stations (BSs), these patterns are typically proprietary and not readily accessible. Operational parameters of BSs, which inherently contain beam information, offer an opportunity for data-driven low-altitude coverage prediction. However, collecting extensive low-altitude road test data is cost-prohibitive, often yielding only sparse samples per BS. This scarcity results in two primary challenges: imbalanced feature sampling due to limited variability in high-dimensional operational parameters against the backdrop of substantial changes in low-dimensional sampling locations, and diminished generalizability stemming from insufficient data samples. To overcome these obstacles, we introduce a dual strategy comprising expert knowledge-based feature compression and disentangled representation learning. The former reduces feature space complexity by leveraging communications expertise, while the latter enhances model generalizability through the integration of propagation models and distinct subnetworks that capture and aggregate the semantic representations of latent features. Experimental evaluation confirms the efficacy of our framework, yielding a 7% reduction in error compared to the best baseline algorithm. Real-network validations further attest to its reliability, achieving practical prediction accuracy with MAE errors at the 5dB level.

One fundamental limitation to the research of bird strike prevention is the lack of a large-scale dataset taken directly from real-world airports. Existing relevant datasets are either small in size or not dedicated for this purpose. To advance the research and practical solutions for bird strike prevention, in this paper, we present a large-scale challenging dataset AirBirds that consists of 118,312 time-series images, where a total of 409,967 bounding boxes of flying birds are manually, carefully annotated. The average size of all annotated instances is smaller than 10 pixels in 1920x1080 images. Images in the dataset are captured over 4 seasons of a whole year by a network of cameras deployed at a real-world airport, covering diverse bird species, lighting conditions and 13 meteorological scenarios. To the best of our knowledge, it is the first large-scale image dataset that directly collects flying birds in real-world airports for bird strike prevention. This dataset is publicly available at https://airbirdsdata.github.io/.

Swarm UAV autonomous flight for Long-Horizon (LH) tasks is crucial for advancing the low-altitude economy. However, existing methods focus only on specific basic tasks due to dataset limitations, failing in real-world deployment for LH tasks. LH tasks are not mere concatenations of basic tasks, requiring handling long-term dependencies, maintaining persistent states, and adapting to dynamic goal shifts. This paper presents U2UData-2, the first large-scale swarm UAV autonomous flight dataset for LH tasks and the first scalable swarm UAV data online collection and algorithm closed-loop verification platform. The dataset is captured by 15 UAVs in autonomous collaborative flights for LH tasks, comprising 12 scenes, 720 traces, 120 hours, 600 seconds per trajectory, 4.32M LiDAR frames, and 12.96M RGB frames. This dataset also includes brightness, temperature, humidity, smoke, and airflow values covering all flight routes. The platform supports the customization of simulators, UAVs, sensors, flight algorithms, formation modes, and LH tasks. Through a visual control window, this platform allows users to collect customized datasets through one-click deployment online and to verify algorithms by closed-loop simulation. U2UData-2 also introduces an LH task for wildlife conservation and provides comprehensive benchmarks with 9 SOTA models. U2UData-2 can be found at https://fengtt42.github.io/U2UData-2/.

As unmanned aerial systems (UASs) increasingly integrate into the US national airspace system, there is an increasing need to characterize how commercial and recreational UASs may encounter each other. To inform the development and evaluation of safety critical technologies, we demonstrate a methodology to analytically calculate all potential relative geometries between different UAS operations performing inspection missions. This method is based on a previously demonstrated technique that leverages open source geospatial information to generate representative unmanned aircraft trajectories. Using open source data and parallel processing techniques, we performed trillions of calculations to estimate the relative horizontal distance between geospatial points across sixteen locations.

We introduce a benchmark for system identification based on 75k real-world samples from the Crazyflie 2.1 Brushless nano-quadrotor, a sub-50g aerial vehicle widely adopted in robotics research. The platform presents a challenging testbed due to its multi-input, multi-output nature, open-loop instability, and nonlinear dynamics under agile maneuvers. The dataset comprises four aggressive trajectories with synchronized 4-dimensional motor inputs and 13-dimensional output measurements. To enable fair comparison of identification methods, the benchmark includes a suite of multi-horizon prediction metrics for evaluating both one-step and multi-step error propagation. In addition to the data, we provide a detailed description of the platform and experimental setup, as well as baseline models highlighting the challenge of accurate prediction under real-world noise and actuation nonlinearities. All data, scripts, and reference implementations are released as open-source at https://github.com/idsia-robotics/nanodrone-sysid-benchmark to facilitate transparent comparison of algorithms and support research on agile, miniaturized aerial robotics.