Check the SysML v2 code below for correctness with respect to the given domain constraints.
Repair the code if it is incorrect, produce a corrected version.
If the code is correct, report it as correct.

Code:
```sysml
package Vehicle_Remix_0147_b1c5 {
    port def MotorInput;
    port def BatteryOutput;
    port def ShankCompositePort;
    part def MotorInput_Def { port p : MotorInput; }
    part def BatteryOutput_Def { port p : BatteryOutput; }
    part def ShankCompositePort_Distractor_Def { port p : ShankCompositePort; }
    part def SubSystem_Context {
        part comp_a_e92c : MotorInput_Def;
        part comp_b_8625 : BatteryOutput_Def;
        part comp_distractor_827b : ShankCompositePort_Distractor_Def;
        connect comp_a_e92c.p to comp_b_8625.p;
    }
}
```

Prompt:
Check the SysML v2 code below for correctness with respect to the given domain constraints.
Repair the code if it is incorrect, produce a corrected version.
If the code is correct, report it as correct.

Domain Rules:
- 'BatteryOutput' belongs to Domain: electrical_power
- 'MotorInput' belongs to Domain: electrical_power
- 'ShankCompositePort' belongs to Domain: mechanical_fastening

Valid Connections Rules:
- electrical_power can ONLY connect to: ['electrical_power']
- mechanical_fastening can ONLY connect to: ['mechanical_fastening']

Code:
```sysml
package Vehicle_Remix_0147_b1c5 {
    port def MotorInput;
    port def BatteryOutput;
    port def ShankCompositePort;
    part def MotorInput_Def { port p : MotorInput; }
    part def BatteryOutput_Def { port p : BatteryOutput; }
    part def ShankCompositePort_Distractor_Def { port p : ShankCompositePort; }
    part def SubSystem_Context {
        part comp_a_e92c : MotorInput_Def;
        part comp_b_8625 : BatteryOutput_Def;
        part comp_distractor_827b : ShankCompositePort_Distractor_Def;
        connect comp_a_e92c.p to comp_b_8625.p;
    }
}
```

CODE STATUS = CORRECT
NO CHANGES REQUIRED


The following SysML v2 code contains compiler-reported syntax errors.
Repair the code so that it compiles successfully.

Compiler Error:
ERROR:mismatched input '<EOF>' expecting '}' (9431.sysml line : 23 column : 1)

Code:
```sysml
package Vehicle_Remix_0997_7b4e {
    port def BatteryOutput;
    port def FuelPort;
    part def FuelPort_Def { port p : FuelPort;
    part def FuelPort_Def { port p : FuelPort; }
    part def BatteryOutput_Distractor_Def { port p : BatteryOutput; }
    part def SubSystem_Context {
        part comp_a_91a0 : FuelPort_Def;
        part comp_b_9b0b : FuelPort_Def;
        part comp_distractor_ff4f : BatteryOutput_Distractor_Def;
        connect comp_a_91a0.p to comp_b_9b0b.p;
    }
}
```

Prompt:
The following SysML v2 code contains compiler-reported syntax errors.
Repair the code so that it compiles successfully.

Compiler Error:
ERROR:mismatched input '<EOF>' expecting '}' (9431.sysml line : 23 column : 1)

Code:
```sysml
package Vehicle_Remix_0997_7b4e {
    port def BatteryOutput;
    port def FuelPort;
    part def FuelPort_Def { port p : FuelPort;
    part def FuelPort_Def { port p : FuelPort; }
    part def BatteryOutput_Distractor_Def { port p : BatteryOutput; }
    part def SubSystem_Context {
        part comp_a_91a0 : FuelPort_Def;
        part comp_b_9b0b : FuelPort_Def;
        part comp_distractor_ff4f : BatteryOutput_Distractor_Def;
        connect comp_a_91a0.p to comp_b_9b0b.p;
    }
}
```

CODE STATUS = INCORRECT
```sysml
package Vehicle_Remix_0997_7b4e {
    port def BatteryOutput;
    port def FuelPort;
    part def FuelPort_Def { port p : FuelPort; }
    part def FuelPort_Def { port p : FuelPort; }
    part def BatteryOutput_Distractor_Def { port p : BatteryOutput; }
    part def SubSystem_Context {
        part comp_a_91a0 : FuelPort_Def;
        part comp_b_9b0b : FuelPort_Def;
        part comp_distractor_ff4f : BatteryOutput_Distractor_Def;
        connect comp_a_91a0.p to comp_b_9b0b.p;
    }
}
```

CODE STATUS = INCORRECT
```sysml
@@ -1,7 +1,7 @@
 package Vehicle_Remix_0997_7b4e {
     port def BatteryOutput;
     port def FuelPort;
-    part def FuelPort_Def { port p : FuelPort;
+    part def FuelPort_Def { port p : FuelPort; }
     part def FuelPort_Def { port p : FuelPort; }
     part def BatteryOutput_Distractor_Def { port p : BatteryOutput; }
     part def SubSystem_Context {
```


Check the SysML v2 code below for correctness with respect to the given domain constraints.
Repair the code if it is incorrect, produce a corrected version.
If the code is correct, report it as correct.

Code:
```sysml
package Vehicle_Remix_0192_81e9 {
    port def LugNutPort;
    port def ShaftPort_b;
    port def LugNutCompositePort;
    part def LugNutCompositePort_Def { port p : LugNutCompositePort; }
    part def LugNutPort_Def { port p : LugNutPort; }
    part def ShaftPort_b_Distractor_Def { port p : ShaftPort_b; }
    part def SubSystem_Context {
        part comp_a_96e6 : LugNutCompositePort_Def;
        part comp_b_bffa : LugNutPort_Def;
        part comp_distractor_2adb : ShaftPort_b_Distractor_Def;
        connect comp_a_96e6.p to comp_b_bffa.p;
    }
}
```

Prompt:
Check the SysML v2 code below for correctness with respect to the given domain constraints.
Repair the code if it is incorrect, produce a corrected version.
If the code is correct, report it as correct.

Domain Rules:
- 'ShaftPort_b' belongs to Domain: mechanical_torque
- 'LugNutPort' belongs to Domain: mechanical_fastening
- 'LugNutCompositePort' belongs to Domain: mechanical_fastening

Valid Connections Rules:
- mechanical_fastening can ONLY connect to: ['mechanical_fastening']
- mechanical_torque can ONLY connect to: ['mechanical_torque']

Code:
```sysml
package Vehicle_Remix_0192_81e9 {
    port def LugNutPort;
    port def ShaftPort_b;
    port def LugNutCompositePort;
    part def LugNutCompositePort_Def { port p : LugNutCompositePort; }
    part def LugNutPort_Def { port p : LugNutPort; }
    part def ShaftPort_b_Distractor_Def { port p : ShaftPort_b; }
    part def SubSystem_Context {
        part comp_a_96e6 : LugNutCompositePort_Def;
        part comp_b_bffa : LugNutPort_Def;
        part comp_distractor_2adb : ShaftPort_b_Distractor_Def;
        connect comp_a_96e6.p to comp_b_bffa.p;
    }
}
```

CODE STATUS = CORRECT
NO CHANGES REQUIRED


Check the SysML v2 code below for correctness with respect to the given domain constraints.
Repair the code if it is incorrect, produce a corrected version.
If the code is correct, report it as correct.

Code:
```sysml
package Vehicle_Remix_0409_721a {
    port def ShaftPort_b;
    port def FuelPort;
    part def FuelPort_Def { port p : FuelPort; }
    part def FuelPort_Def { port p : FuelPort; }
    part def ShaftPort_b_Distractor_Def { port p : ShaftPort_b; }
    part def SubSystem_Context {
        part comp_a_02f0 : FuelPort_Def;
        part comp_b_fa4b : FuelPort_Def;
        part comp_distractor_5f29 : ShaftPort_b_Distractor_Def;
        connect comp_a_02f0.p to comp_b_fa4b.p;
    }
}
```

Prompt:
Check the SysML v2 code below for correctness with respect to the given domain constraints.
Repair the code if it is incorrect, produce a corrected version.
If the code is correct, report it as correct.

Domain Rules:
- 'ShaftPort_b' belongs to Domain: mechanical_torque
- 'FuelPort' belongs to Domain: fluid_fuel

Valid Connections Rules:
- fluid_fuel can ONLY connect to: ['fluid_fuel']
- mechanical_torque can ONLY connect to: ['mechanical_torque']

Code:
```sysml
package Vehicle_Remix_0409_721a {
    port def ShaftPort_b;
    port def FuelPort;
    part def FuelPort_Def { port p : FuelPort; }
    part def FuelPort_Def { port p : FuelPort; }
    part def ShaftPort_b_Distractor_Def { port p : ShaftPort_b; }
    part def SubSystem_Context {
        part comp_a_02f0 : FuelPort_Def;
        part comp_b_fa4b : FuelPort_Def;
        part comp_distractor_5f29 : ShaftPort_b_Distractor_Def;
        connect comp_a_02f0.p to comp_b_fa4b.p;
    }
}
```

CODE STATUS = CORRECT
NO CHANGES REQUIRED


Check the SysML v2 code below for correctness with respect to the given domain constraints.
Repair the code if it is incorrect, produce a corrected version.
If the code is correct, report it as correct.

Code:
```sysml
package Vehicle_Remix_0192_81e9 {
    port def LugNutPort;
    port def ShaftPort_b;
    port def LugNutCompositePort;
    part def LugNutCompositePort_Def { port p : LugNutCompositePort; }
    part def LugNutPort_Def { port p : LugNutPort; }
    part def ShaftPort_b_Distractor_Def { port p : ShaftPort_b; }
    part def SubSystem_Context {
        part comp_a_96e6 : LugNutCompositePort_Def;
        part comp_b_bffa : LugNutPort_Def;
        part comp_distractor_2adb : ShaftPort_b_Distractor_Def;
        connect comp_a_96e6.p to comp_b_bffa.p;
    }
}
```

Prompt:
Check the SysML v2 code below for correctness with respect to the given domain constraints.
Repair the code if it is incorrect, produce a corrected version.
If the code is correct, report it as correct.

Domain Rules:
- 'ShaftPort_b' belongs to Domain: mechanical_torque
- 'LugNutPort' belongs to Domain: mechanical_fastening
- 'LugNutCompositePort' belongs to Domain: mechanical_fastening

Valid Connections Rules:
- mechanical_fastening can ONLY connect to: ['mechanical_fastening']
- mechanical_torque can ONLY connect to: ['mechanical_torque']

Code:
```sysml
package Vehicle_Remix_0192_81e9 {
    port def LugNutPort;
    port def ShaftPort_b;
    port def LugNutCompositePort;
    part def LugNutCompositePort_Def { port p : LugNutCompositePort; }
    part def LugNutPort_Def { port p : LugNutPort; }
    part def ShaftPort_b_Distractor_Def { port p : ShaftPort_b; }
    part def SubSystem_Context {
        part comp_a_96e6 : LugNutCompositePort_Def;
        part comp_b_bffa : LugNutPort_Def;
        part comp_distractor_2adb : ShaftPort_b_Distractor_Def;
        connect comp_a_96e6.p to comp_b_bffa.p;
    }
}
```

CODE STATUS = CORRECT
NO CHANGES REQUIRED


Check the SysML v2 code below for correctness with respect to the given domain constraints.
Repair the code if it is incorrect, produce a corrected version.
If the code is correct, report it as correct.

Code:
```sysml
package Vehicle_Remix_0652_3707 {
    port def ControlPort;
    port def FuelPort;
    part def FuelPort_Def { port p : FuelPort; }
    part def FuelPort_Def { port p : FuelPort; }
    part def ControlPort_Distractor_Def { port p : ControlPort; }
    part def SubSystem_Context {
        part comp_a_3ab5 : FuelPort_Def;
        part comp_b_2dd8 : FuelPort_Def;
        part comp_distractor_0e6b : ControlPort_Distractor_Def;
        connect comp_a_3ab5.p to comp_b_2dd8.p;
    }
}
```

Prompt:
Check the SysML v2 code below for correctness with respect to the given domain constraints.
Repair the code if it is incorrect, produce a corrected version.
If the code is correct, report it as correct.

Domain Rules:
- 'FuelPort' belongs to Domain: fluid_fuel
- 'ControlPort' belongs to Domain: command_signal

Valid Connections Rules:
- command_signal can ONLY connect to: ['command_signal']
- fluid_fuel can ONLY connect to: ['fluid_fuel']

Code:
```sysml
package Vehicle_Remix_0652_3707 {
    port def ControlPort;
    port def FuelPort;
    part def FuelPort_Def { port p : FuelPort; }
    part def FuelPort_Def { port p : FuelPort; }
    part def ControlPort_Distractor_Def { port p : ControlPort; }
    part def SubSystem_Context {
        part comp_a_3ab5 : FuelPort_Def;
        part comp_b_2dd8 : FuelPort_Def;
        part comp_distractor_0e6b : ControlPort_Distractor_Def;
        connect comp_a_3ab5.p to comp_b_2dd8.p;
    }
}
```

CODE STATUS = CORRECT
NO CHANGES REQUIRED


The following SysML v2 code contains compiler-reported syntax errors.
Repair the code so that it compiles successfully.

Compiler Error:
ERROR:mismatched input '<EOF>' expecting '}' (2159.sysml line : 23 column : 1)

Code:
```sysml
package Vehicle_Remix_0088_8668 {
    port def MotorOutput;
    port def FuelPort;
    part def FuelPort_Def { port p : FuelPort;
    part def FuelPort_Def { port p : FuelPort; }
    part def MotorOutput_Distractor_Def { port p : MotorOutput; }
    part def SubSystem_Context {
        part comp_a_c952 : FuelPort_Def;
        part comp_b_b52b : FuelPort_Def;
        part comp_distractor_a4cc : MotorOutput_Distractor_Def;
        connect comp_a_c952.p to comp_b_b52b.p;
    }
}
```

Prompt:
The following SysML v2 code contains compiler-reported syntax errors.
Repair the code so that it compiles successfully.

Compiler Error:
ERROR:mismatched input '<EOF>' expecting '}' (2159.sysml line : 23 column : 1)

Code:
```sysml
package Vehicle_Remix_0088_8668 {
    port def MotorOutput;
    port def FuelPort;
    part def FuelPort_Def { port p : FuelPort;
    part def FuelPort_Def { port p : FuelPort; }
    part def MotorOutput_Distractor_Def { port p : MotorOutput; }
    part def SubSystem_Context {
        part comp_a_c952 : FuelPort_Def;
        part comp_b_b52b : FuelPort_Def;
        part comp_distractor_a4cc : MotorOutput_Distractor_Def;
        connect comp_a_c952.p to comp_b_b52b.p;
    }
}
```

CODE STATUS = INCORRECT
```sysml
package Vehicle_Remix_0088_8668 {
    port def MotorOutput;
    port def FuelPort;
    part def FuelPort_Def { port p : FuelPort; }
    part def FuelPort_Def { port p : FuelPort; }
    part def MotorOutput_Distractor_Def { port p : MotorOutput; }
    part def SubSystem_Context {
        part comp_a_c952 : FuelPort_Def;
        part comp_b_b52b : FuelPort_Def;
        part comp_distractor_a4cc : MotorOutput_Distractor_Def;
        connect comp_a_c952.p to comp_b_b52b.p;
    }
}
```

CODE STATUS = INCORRECT
```sysml
@@ -1,7 +1,7 @@
 package Vehicle_Remix_0088_8668 {
     port def MotorOutput;
     port def FuelPort;
-    part def FuelPort_Def { port p : FuelPort;
+    part def FuelPort_Def { port p : FuelPort; }
     part def FuelPort_Def { port p : FuelPort; }
     part def MotorOutput_Distractor_Def { port p : MotorOutput; }
     part def SubSystem_Context {
```


ERROR:Type mismatch: Attribute 'mass' declared as 'ISQ::density' but should be 'ISQ::mass' based on semantic meaning (line : 10)

Check the SysML v2 code below for correctness with respect to the given domain constraints.
Repair the code if it is incorrect, produce a corrected version.
If the code is correct, report it as correct.

Code:
```sysml
package '1c-Parts Tree Redefinition' {
	private import SI::kg;
	package Definitions {
		part def Vehicle {
			attribute mass :> ISQ::density;
		}
		part def AxleAssembly;
		part def Axle {
			attribute mass :> ISQ::mass;
		}
		part def FrontAxle :> Axle {
			attribute steeringAngle: ScalarValues::Real;
		}
		part def Wheel;
	}
	package Usages {
		private import Definitions::*;
		part vehicle1: Vehicle {
			attribute mass redefines Vehicle::mass default = 1750 [kg] {
			doc
			/*
			 * The mass attribute is redefined to give it a default value.
			 */
			}
			part frontAxleAssembly: AxleAssembly {
				part frontAxle: Axle;
				part frontWheel: Wheel[2] ordered;
			}
			part rearAxleAssembly: AxleAssembly {
				part rearAxle: Axle;
				part rearWheel: Wheel[2] ordered;
			}
		}
		part vehicle1_c1 :> vehicle1 {
			/*
			 * 'vehicle1_c1' is a specialization of 'vehicle1' (technically
			 * a subset). It inherits all the parts of 'vehicle1' and
			 * only needs to specify additional or redefined parts.
			 */
			attribute mass redefines vehicle1::mass = 2000 [kg] {
				/*
				 * The mass is further redefined to override the default value
				 * with a bound value for 'vehicle_c1'.
				 */
			}
			part frontAxleAssembly_c1 redefines frontAxleAssembly {
				part frontAxle_c1: FrontAxle redefines frontAxle {
					/*
					 * 'frontAxle_c1' redefines 'frontAxleAssembly'::'frontAxle'
					 * to give it a new name and the specialized type
					 * 'FrontAxle'.
					 */
				}
				/*
				 * 'frontWheel' is inherited from 'vehicle1'::'frontAxleAssembly',
				 * allowing it to be used in the following part declarations.
				 */
				part frontWheel_1 subsets frontWheel = frontWheel#(1);
				part frontWheel_2 subsets frontWheel = frontWheel#(2);
			}
			part rearAxleAssembly_c1 redefines rearAxleAssembly {
				part rearAxle_c1 redefines rearAxle {
					/*
					 * 'rearAxle_c1' redefines 'rearAxleAssembly'::'rearAxle'
					 * to give it a new name. It inherits the type 'Axle'
					 * from the redefined part.
					 */
				}
				part rearWheel_1 subsets rearWheel = rearWheel#(1);
				part rearWheel_2 subsets rearWheel = rearWheel#(2);
			}
		}
	}
}
```

Prompt:
Check the SysML v2 code below for correctness with respect to the given domain constraints.
Repair the code if it is incorrect, produce a corrected version.
If the code is correct, report it as correct.

Domain Rules:

Code:
```sysml
package '1c-Parts Tree Redefinition' {
	private import SI::kg;
	package Definitions {
		part def Vehicle {
			attribute mass :> ISQ::density;
		}
		part def AxleAssembly;
		part def Axle {
			attribute mass :> ISQ::mass;
		}
		part def FrontAxle :> Axle {
			attribute steeringAngle: ScalarValues::Real;
		}
		part def Wheel;
	}
	package Usages {
		private import Definitions::*;
		part vehicle1: Vehicle {
			attribute mass redefines Vehicle::mass default = 1750 [kg] {
			doc
			/*
			 * The mass attribute is redefined to give it a default value.
			 */
			}
			part frontAxleAssembly: AxleAssembly {
				part frontAxle: Axle;
				part frontWheel: Wheel[2] ordered;
			}
			part rearAxleAssembly: AxleAssembly {
				part rearAxle: Axle;
				part rearWheel: Wheel[2] ordered;
			}
		}
		part vehicle1_c1 :> vehicle1 {
			/*
			 * 'vehicle1_c1' is a specialization of 'vehicle1' (technically
			 * a subset). It inherits all the parts of 'vehicle1' and
			 * only needs to specify additional or redefined parts.
			 */
			attribute mass redefines vehicle1::mass = 2000 [kg] {
				/*
				 * The mass is further redefined to override the default value
				 * with a bound value for 'vehicle_c1'.
				 */
			}
			part frontAxleAssembly_c1 redefines frontAxleAssembly {
				part frontAxle_c1: FrontAxle redefines frontAxle {
					/*
					 * 'frontAxle_c1' redefines 'frontAxleAssembly'::'frontAxle'
					 * to give it a new name and the specialized type
					 * 'FrontAxle'.
					 */
				}
				/*
				 * 'frontWheel' is inherited from 'vehicle1'::'frontAxleAssembly',
				 * allowing it to be used in the following part declarations.
				 */
				part frontWheel_1 subsets frontWheel = frontWheel#(1);
				part frontWheel_2 subsets frontWheel = frontWheel#(2);
			}
			part rearAxleAssembly_c1 redefines rearAxleAssembly {
				part rearAxle_c1 redefines rearAxle {
					/*
					 * 'rearAxle_c1' redefines 'rearAxleAssembly'::'rearAxle'
					 * to give it a new name. It inherits the type 'Axle'
					 * from the redefined part.
					 */
				}
				part rearWheel_1 subsets rearWheel = rearWheel#(1);
				part rearWheel_2 subsets rearWheel = rearWheel#(2);
			}
		}
	}
}
```

CODE STATUS = INCORRECT
```sysml
package '1c-Parts Tree Redefinition' {
	private import SI::kg;
	package Definitions {
		part def Vehicle {
			attribute mass :> ISQ::mass;
		}
		part def AxleAssembly;
		part def Axle {
			attribute mass :> ISQ::mass;
		}
		part def FrontAxle :> Axle {
			attribute steeringAngle: ScalarValues::Real;
		}
		part def Wheel;
	}
	package Usages {
		private import Definitions::*;
		part vehicle1: Vehicle {
			attribute mass redefines Vehicle::mass default = 1750 [kg] {
			doc
			/*
			 * The mass attribute is redefined to give it a default value.
			 */
			}
			part frontAxleAssembly: AxleAssembly {
				part frontAxle: Axle;
				part frontWheel: Wheel[2] ordered;
			}
			part rearAxleAssembly: AxleAssembly {
				part rearAxle: Axle;
				part rearWheel: Wheel[2] ordered;
			}
		}
		part vehicle1_c1 :> vehicle1 {
			/*
			 * 'vehicle1_c1' is a specialization of 'vehicle1' (technically
			 * a subset). It inherits all the parts of 'vehicle1' and
			 * only needs to specify additional or redefined parts.
			 */
			attribute mass redefines vehicle1::mass = 2000 [kg] {
				/*
				 * The mass is further redefined to override the default value
				 * with a bound value for 'vehicle_c1'.
				 */
			}
			part frontAxleAssembly_c1 redefines frontAxleAssembly {
				part frontAxle_c1: FrontAxle redefines frontAxle {
					/*
					 * 'frontAxle_c1' redefines 'frontAxleAssembly'::'frontAxle'
					 * to give it a new name and the specialized type
					 * 'FrontAxle'.
					 */
				}
				/*
				 * 'frontWheel' is inherited from 'vehicle1'::'frontAxleAssembly',
				 * allowing it to be used in the following part declarations.
				 */
				part frontWheel_1 subsets frontWheel = frontWheel#(1);
				part frontWheel_2 subsets frontWheel = frontWheel#(2);
			}
			part rearAxleAssembly_c1 redefines rearAxleAssembly {
				part rearAxle_c1 redefines rearAxle {
					/*
					 * 'rearAxle_c1' redefines 'rearAxleAssembly'::'rearAxle'
					 * to give it a new name. It inherits the type 'Axle'
					 * from the redefined part.
					 */
				}
				part rearWheel_1 subsets rearWheel = rearWheel#(1);
				part rearWheel_2 subsets rearWheel = rearWheel#(2);
			}
		}
	}
}
```

CODE STATUS = INCORRECT
```sysml
@@ -2,7 +2,7 @@
 	private import SI::kg;
 	package Definitions {
 		part def Vehicle {
-			attribute mass :> ISQ::density;
+			attribute mass :> ISQ::mass;
 		}
 		part def AxleAssembly;
 		part def Axle {
```


The following SysML v2 code contains compiler-reported syntax errors.
Repair the code so that it compiles successfully.

Compiler Error:
ERROR:no viable alternative at input 'connect' (6950.sysml line : 21 column : 9)
ERROR:no viable alternative at input '.' (6950.sysml line : 21 column : 28)
ERROR:no viable alternative at input 'to' (6950.sysml line : 21 column : 31)
ERROR:no viable alternative at input '.' (6950.sysml line : 21 column : 45)

Code:
```sysml
package Vehicle_Remix_0687_f5aa {
    port def MotorInput;
    port def ShankCompositePort;
    part def MotorInput_Def { port p : MotorInput; }
    part def MotorInput_Def { port p : MotorInput; }
    part def ShankCompositePort_Distractor_Def { port p : ShankCompositePort; }
    part def SubSystem_Context {
        part comp_a_4602 : MotorInput_Def;
        part comp_b_1e78 : MotorInput_Def;
        part comp_distractor_19fe : ShankCompositePort_Distractor_Def
        connect comp_a_4602.p to comp_b_1e78.p;
    }
}
```

Prompt:
The following SysML v2 code contains compiler-reported syntax errors.
Repair the code so that it compiles successfully.

Compiler Error:
ERROR:no viable alternative at input 'connect' (6950.sysml line : 21 column : 9)
ERROR:no viable alternative at input '.' (6950.sysml line : 21 column : 28)
ERROR:no viable alternative at input 'to' (6950.sysml line : 21 column : 31)
ERROR:no viable alternative at input '.' (6950.sysml line : 21 column : 45)

Code:
```sysml
package Vehicle_Remix_0687_f5aa {
    port def MotorInput;
    port def ShankCompositePort;
    part def MotorInput_Def { port p : MotorInput; }
    part def MotorInput_Def { port p : MotorInput; }
    part def ShankCompositePort_Distractor_Def { port p : ShankCompositePort; }
    part def SubSystem_Context {
        part comp_a_4602 : MotorInput_Def;
        part comp_b_1e78 : MotorInput_Def;
        part comp_distractor_19fe : ShankCompositePort_Distractor_Def
        connect comp_a_4602.p to comp_b_1e78.p;
    }
}
```

CODE STATUS = INCORRECT
```sysml
package Vehicle_Remix_0687_f5aa {
    port def MotorInput;
    port def ShankCompositePort;
    part def MotorInput_Def { port p : MotorInput; }
    part def MotorInput_Def { port p : MotorInput; }
    part def ShankCompositePort_Distractor_Def { port p : ShankCompositePort; }
    part def SubSystem_Context {
        part comp_a_4602 : MotorInput_Def;
        part comp_b_1e78 : MotorInput_Def;
        part comp_distractor_19fe : ShankCompositePort_Distractor_Def;
        connect comp_a_4602.p to comp_b_1e78.p;
    }
}
```

CODE STATUS = INCORRECT
```sysml
@@ -7,7 +7,7 @@
     part def SubSystem_Context {
         part comp_a_4602 : MotorInput_Def;
         part comp_b_1e78 : MotorInput_Def;
-        part comp_distractor_19fe : ShankCompositePort_Distractor_Def
+        part comp_distractor_19fe : ShankCompositePort_Distractor_Def;
         connect comp_a_4602.p to comp_b_1e78.p;
     }
 }
```


The following SysML v2 code contains compiler-reported syntax errors.
Repair the code so that it compiles successfully.

Compiler Error:
ERROR:A port must be typed by port definitions. (2033.sysml line : 9 column : 31)

Code:
```sysml
package Vehicle_Remix_0072_4cf0 {
    part def MotorInput;
    port def MotorOutput;
    port def FuelPort;
    part def MotorInput_Def { port p : MotorInput; }
    part def MotorOutput_Def { port p : MotorOutput; }
    part def FuelPort_Distractor_Def { port p : FuelPort; }
    part def SubSystem_Context {
        part comp_a_92e9 : MotorInput_Def;
        part comp_b_c9ab : MotorOutput_Def;
        part comp_distractor_6e36 : FuelPort_Distractor_Def;
        connect comp_a_92e9.p to comp_b_c9ab.p;
    }
}
```

Prompt:
The following SysML v2 code contains compiler-reported syntax errors.
Repair the code so that it compiles successfully.

Compiler Error:
ERROR:A port must be typed by port definitions. (2033.sysml line : 9 column : 31)

Code:
```sysml
package Vehicle_Remix_0072_4cf0 {
    part def MotorInput;
    port def MotorOutput;
    port def FuelPort;
    part def MotorInput_Def { port p : MotorInput; }
    part def MotorOutput_Def { port p : MotorOutput; }
    part def FuelPort_Distractor_Def { port p : FuelPort; }
    part def SubSystem_Context {
        part comp_a_92e9 : MotorInput_Def;
        part comp_b_c9ab : MotorOutput_Def;
        part comp_distractor_6e36 : FuelPort_Distractor_Def;
        connect comp_a_92e9.p to comp_b_c9ab.p;
    }
}
```

CODE STATUS = INCORRECT
```sysml
package Vehicle_Remix_0072_4cf0 {
    port def MotorInput;
    port def MotorOutput;
    port def FuelPort;
    part def MotorInput_Def { port p : MotorInput; }
    part def MotorOutput_Def { port p : MotorOutput; }
    part def FuelPort_Distractor_Def { port p : FuelPort; }
    part def SubSystem_Context {
        part comp_a_92e9 : MotorInput_Def;
        part comp_b_c9ab : MotorOutput_Def;
        part comp_distractor_6e36 : FuelPort_Distractor_Def;
        connect comp_a_92e9.p to comp_b_c9ab.p;
    }
}
```

CODE STATUS = INCORRECT
```sysml
@@ -1,5 +1,5 @@
 package Vehicle_Remix_0072_4cf0 {
-    part def MotorInput;
+    port def MotorInput;
     port def MotorOutput;
     port def FuelPort;
     part def MotorInput_Def { port p : MotorInput; }
```


ERROR:Domain violation: Port 'comp_a_72ac.p' (mechanical_torque) cannot connect to 'comp_distractor_c492.p' (electrical_power) (line : 22)

Check the SysML v2 code below for correctness with respect to the given domain constraints.
Repair the code if it is incorrect, produce a corrected version.
If the code is correct, report it as correct.

Code:
```sysml
package Vehicle_Remix_0921_b301 {
    port def MotorInput;
    port def ClutchPort;
    port def ShaftPort_c;
    part def ShaftPort_c_Def { port p : ShaftPort_c; }
    part def ClutchPort_Def { port p : ClutchPort; }
    part def MotorInput_Distractor_Def { port p : MotorInput; }
    part def SubSystem_Context {
        part comp_a_72ac : ShaftPort_c_Def;
        part comp_b_96ce : ClutchPort_Def;
        part comp_distractor_c492 : MotorInput_Distractor_Def;
        connect comp_a_72ac.p to comp_distractor_c492.p;
    }
}
```

Prompt:
Check the SysML v2 code below for correctness with respect to the given domain constraints.
Repair the code if it is incorrect, produce a corrected version.
If the code is correct, report it as correct.

Domain Rules:
- 'ClutchPort' belongs to Domain: mechanical_torque
- 'ShaftPort_c' belongs to Domain: mechanical_torque
- 'MotorInput' belongs to Domain: electrical_power

Valid Connections Rules:
- electrical_power can ONLY connect to: ['electrical_power']
- mechanical_torque can ONLY connect to: ['mechanical_torque']

Code:
```sysml
package Vehicle_Remix_0921_b301 {
    port def MotorInput;
    port def ClutchPort;
    port def ShaftPort_c;
    part def ShaftPort_c_Def { port p : ShaftPort_c; }
    part def ClutchPort_Def { port p : ClutchPort; }
    part def MotorInput_Distractor_Def { port p : MotorInput; }
    part def SubSystem_Context {
        part comp_a_72ac : ShaftPort_c_Def;
        part comp_b_96ce : ClutchPort_Def;
        part comp_distractor_c492 : MotorInput_Distractor_Def;
        connect comp_a_72ac.p to comp_distractor_c492.p;
    }
}
```

CODE STATUS = INCORRECT
```sysml
package Vehicle_Remix_0921_b301 {
    port def MotorInput;
    port def ClutchPort;
    port def ShaftPort_c;
    part def ShaftPort_c_Def { port p : ShaftPort_c; }
    part def ClutchPort_Def { port p : ClutchPort; }
    part def MotorInput_Distractor_Def { port p : MotorInput; }
    part def SubSystem_Context {
        part comp_a_72ac : ShaftPort_c_Def;
        part comp_b_96ce : ClutchPort_Def;
        part comp_distractor_c492 : MotorInput_Distractor_Def;
        connect comp_a_72ac.p to comp_b_96ce.p;
    }
}
```

CODE STATUS = INCORRECT
```sysml
@@ -9,6 +9,6 @@
         part comp_a_72ac : ShaftPort_c_Def;
         part comp_b_96ce : ClutchPort_Def;
         part comp_distractor_c492 : MotorInput_Distractor_Def;
-        connect comp_a_72ac.p to comp_distractor_c492.p;
+        connect comp_a_72ac.p to comp_b_96ce.p;
     }
 }
```


The following SysML v2 code contains compiler-reported syntax errors.
Repair the code so that it compiles successfully.

Compiler Error:
ERROR:mismatched input '<EOF>' expecting '}' (8791.sysml line : 24 column : 1)

Code:
```sysml
package Vehicle_Remix_0917_1fd4 {
    port def ShaftPort_a;
    port def ShaftPort_b;
    port def FuelPort;
    part def ShaftPort_b_Def { port p : ShaftPort_b; }
    part def ShaftPort_a_Def { port p : ShaftPort_a; }
    part def FuelPort_Distractor_Def { port p : FuelPort;
    part def SubSystem_Context {
        part comp_a_215e : ShaftPort_b_Def;
        part comp_b_0c76 : ShaftPort_a_Def;
        part comp_distractor_94cf : FuelPort_Distractor_Def;
        connect comp_a_215e.p to comp_b_0c76.p;
    }
}
```

Prompt:
The following SysML v2 code contains compiler-reported syntax errors.
Repair the code so that it compiles successfully.

Compiler Error:
ERROR:mismatched input '<EOF>' expecting '}' (8791.sysml line : 24 column : 1)

Code:
```sysml
package Vehicle_Remix_0917_1fd4 {
    port def ShaftPort_a;
    port def ShaftPort_b;
    port def FuelPort;
    part def ShaftPort_b_Def { port p : ShaftPort_b; }
    part def ShaftPort_a_Def { port p : ShaftPort_a; }
    part def FuelPort_Distractor_Def { port p : FuelPort;
    part def SubSystem_Context {
        part comp_a_215e : ShaftPort_b_Def;
        part comp_b_0c76 : ShaftPort_a_Def;
        part comp_distractor_94cf : FuelPort_Distractor_Def;
        connect comp_a_215e.p to comp_b_0c76.p;
    }
}
```

CODE STATUS = INCORRECT
```sysml
package Vehicle_Remix_0917_1fd4 {
    port def ShaftPort_a;
    port def ShaftPort_b;
    port def FuelPort;
    part def ShaftPort_b_Def { port p : ShaftPort_b; }
    part def ShaftPort_a_Def { port p : ShaftPort_a; }
    part def FuelPort_Distractor_Def { port p : FuelPort; }
    part def SubSystem_Context {
        part comp_a_215e : ShaftPort_b_Def;
        part comp_b_0c76 : ShaftPort_a_Def;
        part comp_distractor_94cf : FuelPort_Distractor_Def;
        connect comp_a_215e.p to comp_b_0c76.p;
    }
}
```

CODE STATUS = INCORRECT
```sysml
@@ -4,7 +4,7 @@
     port def FuelPort;
     part def ShaftPort_b_Def { port p : ShaftPort_b; }
     part def ShaftPort_a_Def { port p : ShaftPort_a; }
-    part def FuelPort_Distractor_Def { port p : FuelPort;
+    part def FuelPort_Distractor_Def { port p : FuelPort; }
     part def SubSystem_Context {
         part comp_a_215e : ShaftPort_b_Def;
         part comp_b_0c76 : ShaftPort_a_Def;
```


Check the SysML v2 code below for correctness with respect to the given domain constraints.
Repair the code if it is incorrect, produce a corrected version.
If the code is correct, report it as correct.

Code:
```sysml
package Vehicle_Remix_0152_8add {
    port def LugNutPort;
    port def LugNutCompositePort;
    port def FuelPort;
    part def LugNutCompositePort_Def { port p : LugNutCompositePort; }
    part def LugNutPort_Def { port p : LugNutPort; }
    part def FuelPort_Distractor_Def { port p : FuelPort; }
    part def SubSystem_Context {
        part comp_a_9135 : LugNutCompositePort_Def;
        part comp_b_777f : LugNutPort_Def;
        part comp_distractor_26d9 : FuelPort_Distractor_Def;
        connect comp_a_9135.p to comp_b_777f.p;
    }
}
```

Prompt:
Check the SysML v2 code below for correctness with respect to the given domain constraints.
Repair the code if it is incorrect, produce a corrected version.
If the code is correct, report it as correct.

Domain Rules:
- 'FuelPort' belongs to Domain: fluid_fuel
- 'LugNutPort' belongs to Domain: mechanical_fastening
- 'LugNutCompositePort' belongs to Domain: mechanical_fastening

Valid Connections Rules:
- fluid_fuel can ONLY connect to: ['fluid_fuel']
- mechanical_fastening can ONLY connect to: ['mechanical_fastening']

Code:
```sysml
package Vehicle_Remix_0152_8add {
    port def LugNutPort;
    port def LugNutCompositePort;
    port def FuelPort;
    part def LugNutCompositePort_Def { port p : LugNutCompositePort; }
    part def LugNutPort_Def { port p : LugNutPort; }
    part def FuelPort_Distractor_Def { port p : FuelPort; }
    part def SubSystem_Context {
        part comp_a_9135 : LugNutCompositePort_Def;
        part comp_b_777f : LugNutPort_Def;
        part comp_distractor_26d9 : FuelPort_Distractor_Def;
        connect comp_a_9135.p to comp_b_777f.p;
    }
}
```

CODE STATUS = CORRECT
NO CHANGES REQUIRED


The following SysML v2 code contains compiler-reported syntax errors.
Repair the code so that it compiles successfully.

Compiler Error:
ERROR:Couldn't resolve reference to Feature 'p'. (7676.sysml line : 21 column : 29)
ERROR:Couldn't resolve reference to Feature 'p'. (7676.sysml line : 21 column : 46)

Code:
```sysml
package Vehicle_Remix_0777_db57 {
    port def ControlPort;
    port def BatteryInput;
    part def BatteryInput_Def { port p_BROKEN : BatteryInput; }
    part def BatteryInput_Def { port p : BatteryInput; }
    part def ControlPort_Distractor_Def { port p : ControlPort; }
    part def SubSystem_Context {
        part comp_a_1259 : BatteryInput_Def;
        part comp_b_f1e1 : BatteryInput_Def;
        part comp_distractor_1321 : ControlPort_Distractor_Def;
        connect comp_a_1259.p to comp_b_f1e1.p;
    }
}
```

Prompt:
The following SysML v2 code contains compiler-reported syntax errors.
Repair the code so that it compiles successfully.

Compiler Error:
ERROR:Couldn't resolve reference to Feature 'p'. (7676.sysml line : 21 column : 29)
ERROR:Couldn't resolve reference to Feature 'p'. (7676.sysml line : 21 column : 46)

Code:
```sysml
package Vehicle_Remix_0777_db57 {
    port def ControlPort;
    port def BatteryInput;
    part def BatteryInput_Def { port p_BROKEN : BatteryInput; }
    part def BatteryInput_Def { port p : BatteryInput; }
    part def ControlPort_Distractor_Def { port p : ControlPort; }
    part def SubSystem_Context {
        part comp_a_1259 : BatteryInput_Def;
        part comp_b_f1e1 : BatteryInput_Def;
        part comp_distractor_1321 : ControlPort_Distractor_Def;
        connect comp_a_1259.p to comp_b_f1e1.p;
    }
}
```

CODE STATUS = INCORRECT
```sysml
package Vehicle_Remix_0777_db57 {
    port def ControlPort;
    port def BatteryInput;
    part def BatteryInput_Def { port p : BatteryInput; }
    part def BatteryInput_Def { port p : BatteryInput; }
    part def ControlPort_Distractor_Def { port p : ControlPort; }
    part def SubSystem_Context {
        part comp_a_1259 : BatteryInput_Def;
        part comp_b_f1e1 : BatteryInput_Def;
        part comp_distractor_1321 : ControlPort_Distractor_Def;
        connect comp_a_1259.p to comp_b_f1e1.p;
    }
}
```

CODE STATUS = INCORRECT
```sysml
@@ -1,7 +1,7 @@
 package Vehicle_Remix_0777_db57 {
     port def ControlPort;
     port def BatteryInput;
-    part def BatteryInput_Def { port p_BROKEN : BatteryInput; }
+    part def BatteryInput_Def { port p : BatteryInput; }
     part def BatteryInput_Def { port p : BatteryInput; }
     part def ControlPort_Distractor_Def { port p : ControlPort; }
     part def SubSystem_Context {
```


Check the SysML v2 code below for correctness with respect to the given domain constraints.
Repair the code if it is incorrect, produce a corrected version.
If the code is correct, report it as correct.

Code:
```sysml
package Vehicle_Remix_0965_4daa {
    port def CruiseControlPort;
    port def LugNutPort;
    port def HandPort;
    part def HandPort_Def { port p : HandPort; }
    part def CruiseControlPort_Def { port p : CruiseControlPort; }
    part def LugNutPort_Distractor_Def { port p : LugNutPort; }
    part def SubSystem_Context {
        part comp_a_435a : HandPort_Def;
        part comp_b_6b6f : CruiseControlPort_Def;
        part comp_distractor_1642 : LugNutPort_Distractor_Def;
        connect comp_a_435a.p to comp_b_6b6f.p;
    }
}
```

Prompt:
Check the SysML v2 code below for correctness with respect to the given domain constraints.
Repair the code if it is incorrect, produce a corrected version.
If the code is correct, report it as correct.

Domain Rules:
- 'CruiseControlPort' belongs to Domain: command_signal
- 'HandPort' belongs to Domain: command_signal
- 'LugNutPort' belongs to Domain: mechanical_fastening

Valid Connections Rules:
- command_signal can ONLY connect to: ['command_signal']
- mechanical_fastening can ONLY connect to: ['mechanical_fastening']

Code:
```sysml
package Vehicle_Remix_0965_4daa {
    port def CruiseControlPort;
    port def LugNutPort;
    port def HandPort;
    part def HandPort_Def { port p : HandPort; }
    part def CruiseControlPort_Def { port p : CruiseControlPort; }
    part def LugNutPort_Distractor_Def { port p : LugNutPort; }
    part def SubSystem_Context {
        part comp_a_435a : HandPort_Def;
        part comp_b_6b6f : CruiseControlPort_Def;
        part comp_distractor_1642 : LugNutPort_Distractor_Def;
        connect comp_a_435a.p to comp_b_6b6f.p;
    }
}
```

CODE STATUS = CORRECT
NO CHANGES REQUIRED


The following SysML v2 code contains compiler-reported syntax errors.
Repair the code so that it compiles successfully.

Compiler Error:
ERROR:Couldn't resolve reference to Element 'someTopic'. (727.sysml line : 19 column : 37)

Code:
```sysml
package ServerSequenceRealization_2 {
	private import ScalarValues::String;
	private import ServerSequenceModel::*;
	private import Configuration::*;
	package Configuration {
		port def PublicationPort;
		port def SubscriptionPort;
		part producer_2[1] {
			attribute someTopic_BROKEN : String;
			private item somePublication;
			port publicationPort : ~PublicationPort;
			perform action producerBehavior {
				action publish send new Publish(someTopic, somePublication) via publicationPort;
			}
		}
		interface producer_2.publicationPort to server_2.publicationPort;
		part server_2[1] {
			port publicationPort : PublicationPort;
			port subscriptionPort : SubscriptionPort;
			exhibit state serverBehavior {
				entry; then waitForSubscription;
				state waitForSubscription;
				transition subscribing
					first waitForSubscription
					accept sub : Subscribe via subscriptionPort
					then waitForPublication;
				state waitForPublication;
				transition delivering
					first waitForPublication
					accept pub : Publish via publicationPort
					if pub.topic == subscribing.sub.topic
					do send new Deliver(pub.publication) to subscribing.sub.subscriber
					then waitForPublication;
			}
		}
		interface consumer_2.subscriptionPort to server_2.subscriptionPort;
		part consumer_2[1] {
			attribute myTopic : String;
			port subscriptionPort : ~SubscriptionPort;
			perform action consumerBehavior {
				action subscribe send new Subscribe(myTopic, consumer_2) to server_2;
				then action delivery accept Deliver via consumer_2;
			}
		}
	}
	part realization_2 : PubSubSequence {
		part :>> producer :> producer_2 {
			event producerBehavior.publish[1] :>> publish_source_event;
		}
		part :>> server :> server_2 {
			event serverBehavior.subscribing.accepter[1] :>> subscribe_target_event;
			event serverBehavior.delivering.accepter[1] :>> publish_target_event;
			event serverBehavior.delivering.effect[1] :>> deliver_source_event;
		}
		part :>> consumer :> consumer_2 {
			event consumerBehavior.subscribe[1] :>> subscribe_source_event;
			event consumerBehavior.delivery[1] :>> deliver_target_event;
		}
		message :>> publish_message: Transfers::MessageTransfer {
 			end :>> source = producer.publicationPort;
 			end :>> target = server.publicationPort;
 		}
		message :>> subscribe_message: Transfers::MessageTransfer {
 			end :>> source = consumer.subscriptionPort;
 			end :>> target = server.subscriptionPort;
 		}
		message :>> deliver_message: Transfers::MessageTransfer {
 			end :>> source = server;
 			end :>> target = consumer;
 		}
 		/* Binding sent/accept messages to specification model messages. */
		  /* Sends */
 		bind producer_2.producerBehavior.publish.sentMessage = publish_message;
 		bind consumer_2.consumerBehavior.subscribe.sentMessage = subscribe_message;
 		bind server_2.serverBehavior.delivering.effect.sentMessage = deliver_message;
 		  /* Accepts */
 		bind consumer_2.consumerBehavior.delivery.acceptedMessage = subscribe_message;
 		bind server_2.serverBehavior.subscribing.accepter.acceptedMessage = subscribe_message;
 		bind server_2.serverBehavior.delivering.accepter.acceptedMessage = publish_message;
	}
}
```

Prompt:
The following SysML v2 code contains compiler-reported syntax errors.
Repair the code so that it compiles successfully.

Compiler Error:
ERROR:Couldn't resolve reference to Element 'someTopic'. (727.sysml line : 19 column : 37)

Code:
```sysml
package ServerSequenceRealization_2 {
	private import ScalarValues::String;
	private import ServerSequenceModel::*;
	private import Configuration::*;
	package Configuration {
		port def PublicationPort;
		port def SubscriptionPort;
		part producer_2[1] {
			attribute someTopic_BROKEN : String;
			private item somePublication;
			port publicationPort : ~PublicationPort;
			perform action producerBehavior {
				action publish send new Publish(someTopic, somePublication) via publicationPort;
			}
		}
		interface producer_2.publicationPort to server_2.publicationPort;
		part server_2[1] {
			port publicationPort : PublicationPort;
			port subscriptionPort : SubscriptionPort;
			exhibit state serverBehavior {
				entry; then waitForSubscription;
				state waitForSubscription;
				transition subscribing
					first waitForSubscription
					accept sub : Subscribe via subscriptionPort
					then waitForPublication;
				state waitForPublication;
				transition delivering
					first waitForPublication
					accept pub : Publish via publicationPort
					if pub.topic == subscribing.sub.topic
					do send new Deliver(pub.publication) to subscribing.sub.subscriber
					then waitForPublication;
			}
		}
		interface consumer_2.subscriptionPort to server_2.subscriptionPort;
		part consumer_2[1] {
			attribute myTopic : String;
			port subscriptionPort : ~SubscriptionPort;
			perform action consumerBehavior {
				action subscribe send new Subscribe(myTopic, consumer_2) to server_2;
				then action delivery accept Deliver via consumer_2;
			}
		}
	}
	part realization_2 : PubSubSequence {
		part :>> producer :> producer_2 {
			event producerBehavior.publish[1] :>> publish_source_event;
		}
		part :>> server :> server_2 {
			event serverBehavior.subscribing.accepter[1] :>> subscribe_target_event;
			event serverBehavior.delivering.accepter[1] :>> publish_target_event;
			event serverBehavior.delivering.effect[1] :>> deliver_source_event;
		}
		part :>> consumer :> consumer_2 {
			event consumerBehavior.subscribe[1] :>> subscribe_source_event;
			event consumerBehavior.delivery[1] :>> deliver_target_event;
		}
		message :>> publish_message: Transfers::MessageTransfer {
 			end :>> source = producer.publicationPort;
 			end :>> target = server.publicationPort;
 		}
		message :>> subscribe_message: Transfers::MessageTransfer {
 			end :>> source = consumer.subscriptionPort;
 			end :>> target = server.subscriptionPort;
 		}
		message :>> deliver_message: Transfers::MessageTransfer {
 			end :>> source = server;
 			end :>> target = consumer;
 		}
 		/* Binding sent/accept messages to specification model messages. */
		  /* Sends */
 		bind producer_2.producerBehavior.publish.sentMessage = publish_message;
 		bind consumer_2.consumerBehavior.subscribe.sentMessage = subscribe_message;
 		bind server_2.serverBehavior.delivering.effect.sentMessage = deliver_message;
 		  /* Accepts */
 		bind consumer_2.consumerBehavior.delivery.acceptedMessage = subscribe_message;
 		bind server_2.serverBehavior.subscribing.accepter.acceptedMessage = subscribe_message;
 		bind server_2.serverBehavior.delivering.accepter.acceptedMessage = publish_message;
	}
}
```

CODE STATUS = INCORRECT
```sysml
package ServerSequenceRealization_2 {
	private import ScalarValues::String;
	private import ServerSequenceModel::*;
	private import Configuration::*;
	package Configuration {
		port def PublicationPort;
		port def SubscriptionPort;
		part producer_2[1] {
			attribute someTopic : String;
			private item somePublication;
			port publicationPort : ~PublicationPort;
			perform action producerBehavior {
				action publish send new Publish(someTopic, somePublication) via publicationPort;
			}
		}
		interface producer_2.publicationPort to server_2.publicationPort;
		part server_2[1] {
			port publicationPort : PublicationPort;
			port subscriptionPort : SubscriptionPort;
			exhibit state serverBehavior {
				entry; then waitForSubscription;
				state waitForSubscription;
				transition subscribing
					first waitForSubscription
					accept sub : Subscribe via subscriptionPort
					then waitForPublication;
				state waitForPublication;
				transition delivering
					first waitForPublication
					accept pub : Publish via publicationPort
					if pub.topic == subscribing.sub.topic
					do send new Deliver(pub.publication) to subscribing.sub.subscriber
					then waitForPublication;
			}
		}
		interface consumer_2.subscriptionPort to server_2.subscriptionPort;
		part consumer_2[1] {
			attribute myTopic : String;
			port subscriptionPort : ~SubscriptionPort;
			perform action consumerBehavior {
				action subscribe send new Subscribe(myTopic, consumer_2) to server_2;
				then action delivery accept Deliver via consumer_2;
			}
		}
	}
	part realization_2 : PubSubSequence {
		part :>> producer :> producer_2 {
			event producerBehavior.publish[1] :>> publish_source_event;
		}
		part :>> server :> server_2 {
			event serverBehavior.subscribing.accepter[1] :>> subscribe_target_event;
			event serverBehavior.delivering.accepter[1] :>> publish_target_event;
			event serverBehavior.delivering.effect[1] :>> deliver_source_event;
		}
		part :>> consumer :> consumer_2 {
			event consumerBehavior.subscribe[1] :>> subscribe_source_event;
			event consumerBehavior.delivery[1] :>> deliver_target_event;
		}
		message :>> publish_message: Transfers::MessageTransfer {
 			end :>> source = producer.publicationPort;
 			end :>> target = server.publicationPort;
 		}
		message :>> subscribe_message: Transfers::MessageTransfer {
 			end :>> source = consumer.subscriptionPort;
 			end :>> target = server.subscriptionPort;
 		}
		message :>> deliver_message: Transfers::MessageTransfer {
 			end :>> source = server;
 			end :>> target = consumer;
 		}
 		/* Binding sent/accept messages to specification model messages. */
		  /* Sends */
 		bind producer_2.producerBehavior.publish.sentMessage = publish_message;
 		bind consumer_2.consumerBehavior.subscribe.sentMessage = subscribe_message;
 		bind server_2.serverBehavior.delivering.effect.sentMessage = deliver_message;
 		  /* Accepts */
 		bind consumer_2.consumerBehavior.delivery.acceptedMessage = subscribe_message;
 		bind server_2.serverBehavior.subscribing.accepter.acceptedMessage = subscribe_message;
 		bind server_2.serverBehavior.delivering.accepter.acceptedMessage = publish_message;
	}
}
```

CODE STATUS = INCORRECT
```sysml
@@ -6,7 +6,7 @@
 		port def PublicationPort;
 		port def SubscriptionPort;
 		part producer_2[1] {
-			attribute someTopic_BROKEN : String;
+			attribute someTopic : String;
 			private item somePublication;
 			port publicationPort : ~PublicationPort;
 			perform action producerBehavior {
```


Check the SysML v2 code below for correctness with respect to the given domain constraints.
Repair the code if it is incorrect, produce a corrected version.
If the code is correct, report it as correct.

Code:
```sysml
package Vehicle_Remix_0339_676f {
    port def ShaftPort_b;
    port def AxlePort;
    port def ShankCompositePort;
    part def AxlePort_Def { port p : AxlePort; }
    part def ShaftPort_b_Def { port p : ShaftPort_b; }
    part def ShankCompositePort_Distractor_Def { port p : ShankCompositePort; }
    part def SubSystem_Context {
        part comp_a_d0d7 : AxlePort_Def;
        part comp_b_662f : ShaftPort_b_Def;
        part comp_distractor_1e39 : ShankCompositePort_Distractor_Def;
        connect comp_a_d0d7.p to comp_b_662f.p;
    }
}
```

Prompt:
Check the SysML v2 code below for correctness with respect to the given domain constraints.
Repair the code if it is incorrect, produce a corrected version.
If the code is correct, report it as correct.

Domain Rules:
- 'ShaftPort_b' belongs to Domain: mechanical_torque
- 'AxlePort' belongs to Domain: mechanical_torque
- 'ShankCompositePort' belongs to Domain: mechanical_fastening

Valid Connections Rules:
- mechanical_fastening can ONLY connect to: ['mechanical_fastening']
- mechanical_torque can ONLY connect to: ['mechanical_torque']

Code:
```sysml
package Vehicle_Remix_0339_676f {
    port def ShaftPort_b;
    port def AxlePort;
    port def ShankCompositePort;
    part def AxlePort_Def { port p : AxlePort; }
    part def ShaftPort_b_Def { port p : ShaftPort_b; }
    part def ShankCompositePort_Distractor_Def { port p : ShankCompositePort; }
    part def SubSystem_Context {
        part comp_a_d0d7 : AxlePort_Def;
        part comp_b_662f : ShaftPort_b_Def;
        part comp_distractor_1e39 : ShankCompositePort_Distractor_Def;
        connect comp_a_d0d7.p to comp_b_662f.p;
    }
}
```

CODE STATUS = CORRECT
NO CHANGES REQUIRED


The following SysML v2 code contains compiler-reported syntax errors.
Repair the code so that it compiles successfully.

Compiler Error:
ERROR:A port must be typed by port definitions. (9321.sysml line : 11 column : 42)

Code:
```sysml
package Vehicle_Remix_0983_0b9b {
    part def LugNutPort;
    port def ShaftPort_d;
    port def ClutchPort;
    part def ClutchPort_Def { port p : ClutchPort; }
    part def ShaftPort_d_Def { port p : ShaftPort_d; }
    part def LugNutPort_Distractor_Def { port p : LugNutPort; }
    part def SubSystem_Context {
        part comp_a_533f : ClutchPort_Def;
        part comp_b_700f : ShaftPort_d_Def;
        part comp_distractor_8dbb : LugNutPort_Distractor_Def;
        connect comp_a_533f.p to comp_b_700f.p;
    }
}
```

Prompt:
The following SysML v2 code contains compiler-reported syntax errors.
Repair the code so that it compiles successfully.

Compiler Error:
ERROR:A port must be typed by port definitions. (9321.sysml line : 11 column : 42)

Code:
```sysml
package Vehicle_Remix_0983_0b9b {
    part def LugNutPort;
    port def ShaftPort_d;
    port def ClutchPort;
    part def ClutchPort_Def { port p : ClutchPort; }
    part def ShaftPort_d_Def { port p : ShaftPort_d; }
    part def LugNutPort_Distractor_Def { port p : LugNutPort; }
    part def SubSystem_Context {
        part comp_a_533f : ClutchPort_Def;
        part comp_b_700f : ShaftPort_d_Def;
        part comp_distractor_8dbb : LugNutPort_Distractor_Def;
        connect comp_a_533f.p to comp_b_700f.p;
    }
}
```

CODE STATUS = INCORRECT
```sysml
package Vehicle_Remix_0983_0b9b {
    port def LugNutPort;
    port def ShaftPort_d;
    port def ClutchPort;
    part def ClutchPort_Def { port p : ClutchPort; }
    part def ShaftPort_d_Def { port p : ShaftPort_d; }
    part def LugNutPort_Distractor_Def { port p : LugNutPort; }
    part def SubSystem_Context {
        part comp_a_533f : ClutchPort_Def;
        part comp_b_700f : ShaftPort_d_Def;
        part comp_distractor_8dbb : LugNutPort_Distractor_Def;
        connect comp_a_533f.p to comp_b_700f.p;
    }
}
```

CODE STATUS = INCORRECT
```sysml
@@ -1,5 +1,5 @@
 package Vehicle_Remix_0983_0b9b {
-    part def LugNutPort;
+    port def LugNutPort;
     port def ShaftPort_d;
     port def ClutchPort;
     part def ClutchPort_Def { port p : ClutchPort; }
```


The following SysML v2 code contains compiler-reported syntax errors.
Repair the code so that it compiles successfully.

Compiler Error:
ERROR:Couldn't resolve reference to Feature 'p'. (2636.sysml line : 22 column : 29)

Code:
```sysml
package Vehicle_Remix_0147_b1c5 {
    port def MotorInput;
    port def BatteryOutput;
    port def ShankCompositePort;
    part def MotorInput_Def { port p_BROKEN : MotorInput; }
    part def BatteryOutput_Def { port p : BatteryOutput; }
    part def ShankCompositePort_Distractor_Def { port p : ShankCompositePort; }
    part def SubSystem_Context {
        part comp_a_e92c : MotorInput_Def;
        part comp_b_8625 : BatteryOutput_Def;
        part comp_distractor_827b : ShankCompositePort_Distractor_Def;
        connect comp_a_e92c.p to comp_b_8625.p;
    }
}
```

Prompt:
The following SysML v2 code contains compiler-reported syntax errors.
Repair the code so that it compiles successfully.

Compiler Error:
ERROR:Couldn't resolve reference to Feature 'p'. (2636.sysml line : 22 column : 29)

Code:
```sysml
package Vehicle_Remix_0147_b1c5 {
    port def MotorInput;
    port def BatteryOutput;
    port def ShankCompositePort;
    part def MotorInput_Def { port p_BROKEN : MotorInput; }
    part def BatteryOutput_Def { port p : BatteryOutput; }
    part def ShankCompositePort_Distractor_Def { port p : ShankCompositePort; }
    part def SubSystem_Context {
        part comp_a_e92c : MotorInput_Def;
        part comp_b_8625 : BatteryOutput_Def;
        part comp_distractor_827b : ShankCompositePort_Distractor_Def;
        connect comp_a_e92c.p to comp_b_8625.p;
    }
}
```

CODE STATUS = INCORRECT
```sysml
package Vehicle_Remix_0147_b1c5 {
    port def MotorInput;
    port def BatteryOutput;
    port def ShankCompositePort;
    part def MotorInput_Def { port p : MotorInput; }
    part def BatteryOutput_Def { port p : BatteryOutput; }
    part def ShankCompositePort_Distractor_Def { port p : ShankCompositePort; }
    part def SubSystem_Context {
        part comp_a_e92c : MotorInput_Def;
        part comp_b_8625 : BatteryOutput_Def;
        part comp_distractor_827b : ShankCompositePort_Distractor_Def;
        connect comp_a_e92c.p to comp_b_8625.p;
    }
}
```

CODE STATUS = INCORRECT
```sysml
@@ -2,7 +2,7 @@
     port def MotorInput;
     port def BatteryOutput;
     port def ShankCompositePort;
-    part def MotorInput_Def { port p_BROKEN : MotorInput; }
+    part def MotorInput_Def { port p : MotorInput; }
     part def BatteryOutput_Def { port p : BatteryOutput; }
     part def ShankCompositePort_Distractor_Def { port p : ShankCompositePort; }
     part def SubSystem_Context {
```


Check the SysML v2 code below for correctness with respect to the given domain constraints.
Repair the code if it is incorrect, produce a corrected version.
If the code is correct, report it as correct.

Code:
```sysml
package Vehicle_Remix_0422_635b {
    port def DiffPort;
    port def MotorOutput;
    port def WheelHubIF;
    part def WheelHubIF_Def { port p : WheelHubIF; }
    part def DiffPort_Def { port p : DiffPort; }
    part def MotorOutput_Distractor_Def { port p : MotorOutput; }
    part def SubSystem_Context {
        part comp_a_4e32 : WheelHubIF_Def;
        part comp_b_032e : DiffPort_Def;
        part comp_distractor_c0b7 : MotorOutput_Distractor_Def;
        connect comp_a_4e32.p to comp_b_032e.p;
    }
}
```

Prompt:
Check the SysML v2 code below for correctness with respect to the given domain constraints.
Repair the code if it is incorrect, produce a corrected version.
If the code is correct, report it as correct.

Domain Rules:
- 'WheelHubIF' belongs to Domain: mechanical_torque
- 'DiffPort' belongs to Domain: mechanical_torque
- 'MotorOutput' belongs to Domain: electrical_power

Valid Connections Rules:
- electrical_power can ONLY connect to: ['electrical_power']
- mechanical_torque can ONLY connect to: ['mechanical_torque']

Code:
```sysml
package Vehicle_Remix_0422_635b {
    port def DiffPort;
    port def MotorOutput;
    port def WheelHubIF;
    part def WheelHubIF_Def { port p : WheelHubIF; }
    part def DiffPort_Def { port p : DiffPort; }
    part def MotorOutput_Distractor_Def { port p : MotorOutput; }
    part def SubSystem_Context {
        part comp_a_4e32 : WheelHubIF_Def;
        part comp_b_032e : DiffPort_Def;
        part comp_distractor_c0b7 : MotorOutput_Distractor_Def;
        connect comp_a_4e32.p to comp_b_032e.p;
    }
}
```

CODE STATUS = CORRECT
NO CHANGES REQUIRED


The following SysML v2 code contains compiler-reported syntax errors.
Repair the code so that it compiles successfully.

Compiler Error:
ERROR:no viable alternative at input ';' (293.sysml line : 5 column : 5)
ERROR:no viable alternative at input '::' (293.sysml line : 5 column : 40)

Code:
```sysml
package causeEffect {
	private import Domain::MiningCorporation::miningFrigate;
	private import CauseAndEffect::*;
    private import CausationConnections::;
}
```

Prompt:
The following SysML v2 code contains compiler-reported syntax errors.
Repair the code so that it compiles successfully.

Compiler Error:
ERROR:no viable alternative at input ';' (293.sysml line : 5 column : 5)
ERROR:no viable alternative at input '::' (293.sysml line : 5 column : 40)

Code:
```sysml
package causeEffect {
	private import Domain::MiningCorporation::miningFrigate;
	private import CauseAndEffect::*;
    private import CausationConnections::;
}
```

CODE STATUS = INCORRECT
```sysml
package causeEffect {
	private import Domain::MiningCorporation::miningFrigate;
	private import CauseAndEffect::*;
    private import CausationConnections::*;
}
```

CODE STATUS = INCORRECT
```sysml
@@ -1,5 +1,5 @@
 package causeEffect {
 	private import Domain::MiningCorporation::miningFrigate;
 	private import CauseAndEffect::*;
-    private import CausationConnections::;
+    private import CausationConnections::*;
 }
```


The following SysML v2 code contains compiler-reported syntax errors.
Repair the code so that it compiles successfully.

Compiler Error:
ERROR:mismatched input '<EOF>' expecting '}' (7855.sysml line : 22 column : 6)

Code:
```sysml
package Vehicle_Remix_0800_0464 {
    port def TireInput;
    port def FuelPort;
    part def FuelPort_Def { port p : FuelPort; }
    part def FuelPort_Def { port p : FuelPort; }
    part def TireInput_Distractor_Def { port p : TireInput; }
    part def SubSystem_Context {
        part comp_a_6006 : FuelPort_Def;
        part comp_b_044b : FuelPort_Def;
        part comp_distractor_8fe9 : TireInput_Distractor_Def;
        connect comp_a_6006.p to comp_b_044b.p;
    }
```

Prompt:
The following SysML v2 code contains compiler-reported syntax errors.
Repair the code so that it compiles successfully.

Compiler Error:
ERROR:mismatched input '<EOF>' expecting '}' (7855.sysml line : 22 column : 6)

Code:
```sysml
package Vehicle_Remix_0800_0464 {
    port def TireInput;
    port def FuelPort;
    part def FuelPort_Def { port p : FuelPort; }
    part def FuelPort_Def { port p : FuelPort; }
    part def TireInput_Distractor_Def { port p : TireInput; }
    part def SubSystem_Context {
        part comp_a_6006 : FuelPort_Def;
        part comp_b_044b : FuelPort_Def;
        part comp_distractor_8fe9 : TireInput_Distractor_Def;
        connect comp_a_6006.p to comp_b_044b.p;
    }
```

CODE STATUS = INCORRECT
```sysml
package Vehicle_Remix_0800_0464 {
    port def TireInput;
    port def FuelPort;
    part def FuelPort_Def { port p : FuelPort; }
    part def FuelPort_Def { port p : FuelPort; }
    part def TireInput_Distractor_Def { port p : TireInput; }
    part def SubSystem_Context {
        part comp_a_6006 : FuelPort_Def;
        part comp_b_044b : FuelPort_Def;
        part comp_distractor_8fe9 : TireInput_Distractor_Def;
        connect comp_a_6006.p to comp_b_044b.p;
    }
}
```

CODE STATUS = INCORRECT
```sysml
@@ -10,3 +10,4 @@
         part comp_distractor_8fe9 : TireInput_Distractor_Def;
         connect comp_a_6006.p to comp_b_044b.p;
     }
+}
```


The following SysML v2 code contains compiler-reported syntax errors.
Repair the code so that it compiles successfully.

Compiler Error:
ERROR:A port must be typed by port definitions. (6361.sysml line : 9 column : 29)

Code:
```sysml
package Vehicle_Remix_0613_1628 {
    part def DiffPort;
    port def VehicleToRoadPort;
    port def MotorOutput;
    part def DiffPort_Def { port p : DiffPort; }
    part def VehicleToRoadPort_Def { port p : VehicleToRoadPort; }
    part def MotorOutput_Distractor_Def { port p : MotorOutput; }
    part def SubSystem_Context {
        part comp_a_d7eb : DiffPort_Def;
        part comp_b_b13f : VehicleToRoadPort_Def;
        part comp_distractor_fb8e : MotorOutput_Distractor_Def;
        connect comp_a_d7eb.p to comp_b_b13f.p;
    }
}
```

Prompt:
The following SysML v2 code contains compiler-reported syntax errors.
Repair the code so that it compiles successfully.

Compiler Error:
ERROR:A port must be typed by port definitions. (6361.sysml line : 9 column : 29)

Code:
```sysml
package Vehicle_Remix_0613_1628 {
    part def DiffPort;
    port def VehicleToRoadPort;
    port def MotorOutput;
    part def DiffPort_Def { port p : DiffPort; }
    part def VehicleToRoadPort_Def { port p : VehicleToRoadPort; }
    part def MotorOutput_Distractor_Def { port p : MotorOutput; }
    part def SubSystem_Context {
        part comp_a_d7eb : DiffPort_Def;
        part comp_b_b13f : VehicleToRoadPort_Def;
        part comp_distractor_fb8e : MotorOutput_Distractor_Def;
        connect comp_a_d7eb.p to comp_b_b13f.p;
    }
}
```

CODE STATUS = INCORRECT
```sysml
package Vehicle_Remix_0613_1628 {
    port def DiffPort;
    port def VehicleToRoadPort;
    port def MotorOutput;
    part def DiffPort_Def { port p : DiffPort; }
    part def VehicleToRoadPort_Def { port p : VehicleToRoadPort; }
    part def MotorOutput_Distractor_Def { port p : MotorOutput; }
    part def SubSystem_Context {
        part comp_a_d7eb : DiffPort_Def;
        part comp_b_b13f : VehicleToRoadPort_Def;
        part comp_distractor_fb8e : MotorOutput_Distractor_Def;
        connect comp_a_d7eb.p to comp_b_b13f.p;
    }
}
```

CODE STATUS = INCORRECT
```sysml
@@ -1,5 +1,5 @@
 package Vehicle_Remix_0613_1628 {
-    part def DiffPort;
+    port def DiffPort;
     port def VehicleToRoadPort;
     port def MotorOutput;
     part def DiffPort_Def { port p : DiffPort; }
```


The following SysML v2 code contains compiler-reported syntax errors.
Repair the code so that it compiles successfully.

Compiler Error:
ERROR:mismatched input '<EOF>' expecting '}' (594.sysml line : 130 column : 2)

Code:
```sysml
package VehicleGeometryAndCoordinateFrames {
    private import TrigFunctions::*;
    private import ISQ::*;
    private import SI::*;
    private import Time::*;
    private import ShapeItems::*;
    private import SpatialItems::*;
    private import MeasurementReferences::CoordinateFrame;
    private import MeasurementReferences::TranslationRotationSequence;
    private import MeasurementReferences::Translation;
    private import MeasurementReferences::Rotation;
    private import Collections::Array;
    private import ScalarValues::Boolean;
    private import ScalarValues::Real;
    private import ScalarValues::Natural;
	private import ControlFunctions::forAll;
    part def Vehicle :> SpatialItem;
    part def Chassis :> SpatialItem {
        item :>> shape = new Box(4800 [mm], 1840 [mm], 1350 [mm]);
    }
    part def Wheel :> SpatialItem {
		doc
		/*
		 * Generic wheel with lugbolts
		 *
		 * The radius is estimated for a 22 inch hub plus 110 mm tire height.
		 * The wheel width is equal to the cylinder height.
		 * The wheel has 5 lugbolts that are evenly distributed along a circle centered at the wheel's center.
		 */
        item :>> shape : Cylinder {
            :>> radius = 22/2*25.4 + 110 [mm];
            :>> height = 220 [mm];
        attribute <wcf> wheelCoordinateFrame : CoordinateFrame;
        attribute numberOfBolts : Natural = 5;
		part lugBolts : LugBolt[1..numberOfBolts] :> subSpatialParts;
		/*
		 * As an example of a more involved placement of composite parts, constrain the positions of the coordinate frame origins
		 * of the lugbolts to a circle with radius lbpr distributed evenly over 360°.
		 */
        attribute <lbpr> lugBoltPlacementRadius :>> radius default 60 [mm];
		private attribute lugBoltDistributionAngle :>> planeAngle = 360/numberOfBolts ['°'];
        private attribute lbda : Real = lugBoltDistributionAngle.num * (pi/180);
		assert constraint {
			(1..numberOfBolts)->forAll {
				in i : Natural;
				private attribute lbcf = lugBolts#(i).coordinateFrame;
				private attribute trs : TranslationRotationSequence {
					:>> source = wcf;
					:>> target = lbcf;
					:>> elements = new Translation((lbpr*cos((i-1)*lbda), lbpr*sin((i-1)*lbda), -8)[wcf]);
				}
				lbcf.transformation == trs
			}
		}
    }
    part def LugBolt :> SpatialItem {
    	item :>> shape : Cylinder {
    		:>> radius = 14 [mm];
    		:>> height = 40 [mm];
    	}
    }
    part vehicle : Vehicle, SpatialItem {
		/*
		 * Vehicle frame origin at center of bottom plate of chassis
		 * with +Z upwards and +X in the forward (front) direction
		 */
        attribute datum :>> coordinateFrame {
            :>> mRefs = (mm, mm, mm);
        }
        part chassis : Chassis[1] :> componentParts {
			attribute :>> coordinateFrame {
				attribute :>> transformation : TranslationRotationSequence {
	 	          	attribute :>> source = datum;
                	attribute :>> elements = new Translation((-(shape as Box).length/2, -(shape as Box).width/2, 0)[datum]);
                }
			}
        }
        private attribute plusXAxis : Array { :>> dimensions = 3; :>> elements : Real[3] = (1, 0, 0); }
        private attribute frontWheelXShift : Real = 1670;
        private attribute rearWheelXShift : Real = -1820;
        private attribute wheelYShift : Real = 720;
        part leftFrontWheel : Wheel[1] :> componentParts {
            attribute :>> coordinateFrame {
                attribute :>> transformation : TranslationRotationSequence {
	            	attribute :>> source = datum;
                	attribute :>> elements = (new Translation((frontWheelXShift, wheelYShift, 80)[datum]), new Rotation(plusXAxis[datum], -90['°']));
                }
            }
        }
        part rightFrontWheel : Wheel[1] :> componentParts {
            attribute :>> coordinateFrame {
                attribute :>> transformation : TranslationRotationSequence {
                	attribute :>> source = datum;
                	attribute :>> elements = (new Translation((frontWheelXShift, -wheelYShift, 80)[datum]), new Rotation((1, 0, 0)[datum], 90['°']));
                }
            }
        }
        part leftRearWheel : Wheel[1] :> componentParts {
            attribute :>> coordinateFrame {
                attribute :>> transformation : TranslationRotationSequence {
                	attribute :>> source = datum;
                	attribute :>> elements = (new Translation((rearWheelXShift, wheelYShift, 80)[datum]), new Rotation((1, 0, 0)[datum], 90['°']));
                }
            }
        }
        part rightRearWheel : Wheel[1] :> componentParts {
            attribute :>> coordinateFrame {
                attribute :>> transformation : TranslationRotationSequence {
					attribute :>> source = datum;
                	attribute :>> elements = (new Translation((rearWheelXShift, -wheelYShift, 80)[datum]), new Rotation((-1, 0, 0)[datum], 90['°']));
                }
            }
        }
    }
}
```

Prompt:
The following SysML v2 code contains compiler-reported syntax errors.
Repair the code so that it compiles successfully.

Compiler Error:
ERROR:mismatched input '<EOF>' expecting '}' (594.sysml line : 130 column : 2)

Code:
```sysml
package VehicleGeometryAndCoordinateFrames {
    private import TrigFunctions::*;
    private import ISQ::*;
    private import SI::*;
    private import Time::*;
    private import ShapeItems::*;
    private import SpatialItems::*;
    private import MeasurementReferences::CoordinateFrame;
    private import MeasurementReferences::TranslationRotationSequence;
    private import MeasurementReferences::Translation;
    private import MeasurementReferences::Rotation;
    private import Collections::Array;
    private import ScalarValues::Boolean;
    private import ScalarValues::Real;
    private import ScalarValues::Natural;
	private import ControlFunctions::forAll;
    part def Vehicle :> SpatialItem;
    part def Chassis :> SpatialItem {
        item :>> shape = new Box(4800 [mm], 1840 [mm], 1350 [mm]);
    }
    part def Wheel :> SpatialItem {
		doc
		/*
		 * Generic wheel with lugbolts
		 *
		 * The radius is estimated for a 22 inch hub plus 110 mm tire height.
		 * The wheel width is equal to the cylinder height.
		 * The wheel has 5 lugbolts that are evenly distributed along a circle centered at the wheel's center.
		 */
        item :>> shape : Cylinder {
            :>> radius = 22/2*25.4 + 110 [mm];
            :>> height = 220 [mm];
        attribute <wcf> wheelCoordinateFrame : CoordinateFrame;
        attribute numberOfBolts : Natural = 5;
		part lugBolts : LugBolt[1..numberOfBolts] :> subSpatialParts;
		/*
		 * As an example of a more involved placement of composite parts, constrain the positions of the coordinate frame origins
		 * of the lugbolts to a circle with radius lbpr distributed evenly over 360°.
		 */
        attribute <lbpr> lugBoltPlacementRadius :>> radius default 60 [mm];
		private attribute lugBoltDistributionAngle :>> planeAngle = 360/numberOfBolts ['°'];
        private attribute lbda : Real = lugBoltDistributionAngle.num * (pi/180);
		assert constraint {
			(1..numberOfBolts)->forAll {
				in i : Natural;
				private attribute lbcf = lugBolts#(i).coordinateFrame;
				private attribute trs : TranslationRotationSequence {
					:>> source = wcf;
					:>> target = lbcf;
					:>> elements = new Translation((lbpr*cos((i-1)*lbda), lbpr*sin((i-1)*lbda), -8)[wcf]);
				}
				lbcf.transformation == trs
			}
		}
    }
    part def LugBolt :> SpatialItem {
    	item :>> shape : Cylinder {
    		:>> radius = 14 [mm];
    		:>> height = 40 [mm];
    	}
    }
    part vehicle : Vehicle, SpatialItem {
		/*
		 * Vehicle frame origin at center of bottom plate of chassis
		 * with +Z upwards and +X in the forward (front) direction
		 */
        attribute datum :>> coordinateFrame {
            :>> mRefs = (mm, mm, mm);
        }
        part chassis : Chassis[1] :> componentParts {
			attribute :>> coordinateFrame {
				attribute :>> transformation : TranslationRotationSequence {
	 	          	attribute :>> source = datum;
                	attribute :>> elements = new Translation((-(shape as Box).length/2, -(shape as Box).width/2, 0)[datum]);
                }
			}
        }
        private attribute plusXAxis : Array { :>> dimensions = 3; :>> elements : Real[3] = (1, 0, 0); }
        private attribute frontWheelXShift : Real = 1670;
        private attribute rearWheelXShift : Real = -1820;
        private attribute wheelYShift : Real = 720;
        part leftFrontWheel : Wheel[1] :> componentParts {
            attribute :>> coordinateFrame {
                attribute :>> transformation : TranslationRotationSequence {
	            	attribute :>> source = datum;
                	attribute :>> elements = (new Translation((frontWheelXShift, wheelYShift, 80)[datum]), new Rotation(plusXAxis[datum], -90['°']));
                }
            }
        }
        part rightFrontWheel : Wheel[1] :> componentParts {
            attribute :>> coordinateFrame {
                attribute :>> transformation : TranslationRotationSequence {
                	attribute :>> source = datum;
                	attribute :>> elements = (new Translation((frontWheelXShift, -wheelYShift, 80)[datum]), new Rotation((1, 0, 0)[datum], 90['°']));
                }
            }
        }
        part leftRearWheel : Wheel[1] :> componentParts {
            attribute :>> coordinateFrame {
                attribute :>> transformation : TranslationRotationSequence {
                	attribute :>> source = datum;
                	attribute :>> elements = (new Translation((rearWheelXShift, wheelYShift, 80)[datum]), new Rotation((1, 0, 0)[datum], 90['°']));
                }
            }
        }
        part rightRearWheel : Wheel[1] :> componentParts {
            attribute :>> coordinateFrame {
                attribute :>> transformation : TranslationRotationSequence {
					attribute :>> source = datum;
                	attribute :>> elements = (new Translation((rearWheelXShift, -wheelYShift, 80)[datum]), new Rotation((-1, 0, 0)[datum], 90['°']));
                }
            }
        }
    }
}
```

CODE STATUS = INCORRECT
```sysml
package VehicleGeometryAndCoordinateFrames {
    private import TrigFunctions::*;
    private import ISQ::*;
    private import SI::*;
    private import Time::*;
    private import ShapeItems::*;
    private import SpatialItems::*;
    private import MeasurementReferences::CoordinateFrame;
    private import MeasurementReferences::TranslationRotationSequence;
    private import MeasurementReferences::Translation;
    private import MeasurementReferences::Rotation;
    private import Collections::Array;
    private import ScalarValues::Boolean;
    private import ScalarValues::Real;
    private import ScalarValues::Natural;
	private import ControlFunctions::forAll;
    part def Vehicle :> SpatialItem;
    part def Chassis :> SpatialItem {
        item :>> shape = new Box(4800 [mm], 1840 [mm], 1350 [mm]);
    }
    part def Wheel :> SpatialItem {
		doc
		/*
		 * Generic wheel with lugbolts
		 *
		 * The radius is estimated for a 22 inch hub plus 110 mm tire height.
		 * The wheel width is equal to the cylinder height.
		 * The wheel has 5 lugbolts that are evenly distributed along a circle centered at the wheel's center.
		 */
        item :>> shape : Cylinder {
            :>> radius = 22/2*25.4 + 110 [mm];
            :>> height = 220 [mm];
        }
        attribute <wcf> wheelCoordinateFrame : CoordinateFrame;
        attribute numberOfBolts : Natural = 5;
		part lugBolts : LugBolt[1..numberOfBolts] :> subSpatialParts;
		/*
		 * As an example of a more involved placement of composite parts, constrain the positions of the coordinate frame origins
		 * of the lugbolts to a circle with radius lbpr distributed evenly over 360°.
		 */
        attribute <lbpr> lugBoltPlacementRadius :>> radius default 60 [mm];
		private attribute lugBoltDistributionAngle :>> planeAngle = 360/numberOfBolts ['°'];
        private attribute lbda : Real = lugBoltDistributionAngle.num * (pi/180);
		assert constraint {
			(1..numberOfBolts)->forAll {
				in i : Natural;
				private attribute lbcf = lugBolts#(i).coordinateFrame;
				private attribute trs : TranslationRotationSequence {
					:>> source = wcf;
					:>> target = lbcf;
					:>> elements = new Translation((lbpr*cos((i-1)*lbda), lbpr*sin((i-1)*lbda), -8)[wcf]);
				}
				lbcf.transformation == trs
			}
		}
    }
    part def LugBolt :> SpatialItem {
    	item :>> shape : Cylinder {
    		:>> radius = 14 [mm];
    		:>> height = 40 [mm];
    	}
    }
    part vehicle : Vehicle, SpatialItem {
		/*
		 * Vehicle frame origin at center of bottom plate of chassis
		 * with +Z upwards and +X in the forward (front) direction
		 */
        attribute datum :>> coordinateFrame {
            :>> mRefs = (mm, mm, mm);
        }
        part chassis : Chassis[1] :> componentParts {
			attribute :>> coordinateFrame {
				attribute :>> transformation : TranslationRotationSequence {
	 	          	attribute :>> source = datum;
                	attribute :>> elements = new Translation((-(shape as Box).length/2, -(shape as Box).width/2, 0)[datum]);
                }
			}
        }
        private attribute plusXAxis : Array { :>> dimensions = 3; :>> elements : Real[3] = (1, 0, 0); }
        private attribute frontWheelXShift : Real = 1670;
        private attribute rearWheelXShift : Real = -1820;
        private attribute wheelYShift : Real = 720;
        part leftFrontWheel : Wheel[1] :> componentParts {
            attribute :>> coordinateFrame {
                attribute :>> transformation : TranslationRotationSequence {
	            	attribute :>> source = datum;
                	attribute :>> elements = (new Translation((frontWheelXShift, wheelYShift, 80)[datum]), new Rotation(plusXAxis[datum], -90['°']));
                }
            }
        }
        part rightFrontWheel : Wheel[1] :> componentParts {
            attribute :>> coordinateFrame {
                attribute :>> transformation : TranslationRotationSequence {
                	attribute :>> source = datum;
                	attribute :>> elements = (new Translation((frontWheelXShift, -wheelYShift, 80)[datum]), new Rotation((1, 0, 0)[datum], 90['°']));
                }
            }
        }
        part leftRearWheel : Wheel[1] :> componentParts {
            attribute :>> coordinateFrame {
                attribute :>> transformation : TranslationRotationSequence {
                	attribute :>> source = datum;
                	attribute :>> elements = (new Translation((rearWheelXShift, wheelYShift, 80)[datum]), new Rotation((1, 0, 0)[datum], 90['°']));
                }
            }
        }
        part rightRearWheel : Wheel[1] :> componentParts {
            attribute :>> coordinateFrame {
                attribute :>> transformation : TranslationRotationSequence {
					attribute :>> source = datum;
                	attribute :>> elements = (new Translation((rearWheelXShift, -wheelYShift, 80)[datum]), new Rotation((-1, 0, 0)[datum], 90['°']));
                }
            }
        }
    }
}
```

CODE STATUS = INCORRECT
```sysml
@@ -30,6 +30,7 @@
         item :>> shape : Cylinder {
             :>> radius = 22/2*25.4 + 110 [mm];
             :>> height = 220 [mm];
+        }
         attribute <wcf> wheelCoordinateFrame : CoordinateFrame;
         attribute numberOfBolts : Natural = 5;
 		part lugBolts : LugBolt[1..numberOfBolts] :> subSpatialParts;
```


Check the SysML v2 code below for correctness with respect to the given domain constraints.
Repair the code if it is incorrect, produce a corrected version.
If the code is correct, report it as correct.

Code:
```sysml
package Vehicle_Remix_0151_2834 {
    port def DiffPort;
    port def FuelPort;
    port def AxleToWheelPort;
    part def AxleToWheelPort_Def { port p : AxleToWheelPort; }
    part def DiffPort_Def { port p : DiffPort; }
    part def FuelPort_Distractor_Def { port p : FuelPort; }
    part def SubSystem_Context {
        part comp_a_01a4 : AxleToWheelPort_Def;
        part comp_b_d820 : DiffPort_Def;
        part comp_distractor_3755 : FuelPort_Distractor_Def;
        connect comp_a_01a4.p to comp_b_d820.p;
    }
}
```

Prompt:
Check the SysML v2 code below for correctness with respect to the given domain constraints.
Repair the code if it is incorrect, produce a corrected version.
If the code is correct, report it as correct.

Domain Rules:
- 'DiffPort' belongs to Domain: mechanical_torque
- 'AxleToWheelPort' belongs to Domain: mechanical_torque
- 'FuelPort' belongs to Domain: fluid_fuel

Valid Connections Rules:
- fluid_fuel can ONLY connect to: ['fluid_fuel']
- mechanical_torque can ONLY connect to: ['mechanical_torque']

Code:
```sysml
package Vehicle_Remix_0151_2834 {
    port def DiffPort;
    port def FuelPort;
    port def AxleToWheelPort;
    part def AxleToWheelPort_Def { port p : AxleToWheelPort; }
    part def DiffPort_Def { port p : DiffPort; }
    part def FuelPort_Distractor_Def { port p : FuelPort; }
    part def SubSystem_Context {
        part comp_a_01a4 : AxleToWheelPort_Def;
        part comp_b_d820 : DiffPort_Def;
        part comp_distractor_3755 : FuelPort_Distractor_Def;
        connect comp_a_01a4.p to comp_b_d820.p;
    }
}
```

CODE STATUS = CORRECT
NO CHANGES REQUIRED


The following SysML v2 code contains compiler-reported syntax errors.
Repair the code so that it compiles successfully.

Compiler Error:
ERROR:Couldn't resolve reference to Feature 'p'. (5020.sysml line : 22 column : 29)

Code:
```sysml
package Vehicle_Remix_0445_742c {
    port def LugNutPort;
    port def LugNutCompositePort;
    port def FuelPort;
    part def LugNutCompositePort_Def { port p_BROKEN : LugNutCompositePort; }
    part def LugNutPort_Def { port p : LugNutPort; }
    part def FuelPort_Distractor_Def { port p : FuelPort; }
    part def SubSystem_Context {
        part comp_a_5eec : LugNutCompositePort_Def;
        part comp_b_e4bb : LugNutPort_Def;
        part comp_distractor_9839 : FuelPort_Distractor_Def;
        connect comp_a_5eec.p to comp_b_e4bb.p;
    }
}
```

Prompt:
The following SysML v2 code contains compiler-reported syntax errors.
Repair the code so that it compiles successfully.

Compiler Error:
ERROR:Couldn't resolve reference to Feature 'p'. (5020.sysml line : 22 column : 29)

Code:
```sysml
package Vehicle_Remix_0445_742c {
    port def LugNutPort;
    port def LugNutCompositePort;
    port def FuelPort;
    part def LugNutCompositePort_Def { port p_BROKEN : LugNutCompositePort; }
    part def LugNutPort_Def { port p : LugNutPort; }
    part def FuelPort_Distractor_Def { port p : FuelPort; }
    part def SubSystem_Context {
        part comp_a_5eec : LugNutCompositePort_Def;
        part comp_b_e4bb : LugNutPort_Def;
        part comp_distractor_9839 : FuelPort_Distractor_Def;
        connect comp_a_5eec.p to comp_b_e4bb.p;
    }
}
```

CODE STATUS = INCORRECT
```sysml
package Vehicle_Remix_0445_742c {
    port def LugNutPort;
    port def LugNutCompositePort;
    port def FuelPort;
    part def LugNutCompositePort_Def { port p : LugNutCompositePort; }
    part def LugNutPort_Def { port p : LugNutPort; }
    part def FuelPort_Distractor_Def { port p : FuelPort; }
    part def SubSystem_Context {
        part comp_a_5eec : LugNutCompositePort_Def;
        part comp_b_e4bb : LugNutPort_Def;
        part comp_distractor_9839 : FuelPort_Distractor_Def;
        connect comp_a_5eec.p to comp_b_e4bb.p;
    }
}
```

CODE STATUS = INCORRECT
```sysml
@@ -2,7 +2,7 @@
     port def LugNutPort;
     port def LugNutCompositePort;
     port def FuelPort;
-    part def LugNutCompositePort_Def { port p_BROKEN : LugNutCompositePort; }
+    part def LugNutCompositePort_Def { port p : LugNutCompositePort; }
     part def LugNutPort_Def { port p : LugNutPort; }
     part def FuelPort_Distractor_Def { port p : FuelPort; }
     part def SubSystem_Context {
```


Check the SysML v2 code below for correctness with respect to the given domain constraints.
Repair the code if it is incorrect, produce a corrected version.
If the code is correct, report it as correct.

Code:
```sysml
package Vehicle_Remix_0820_2b45 {
    port def WheelToAxlePort;
    port def IgnitionCmdPort;
    port def ShaftPort_b;
    part def ShaftPort_b_Def { port p : ShaftPort_b; }
    part def WheelToAxlePort_Def { port p : WheelToAxlePort; }
    part def IgnitionCmdPort_Distractor_Def { port p : IgnitionCmdPort; }
    part def SubSystem_Context {
        part comp_a_db09 : ShaftPort_b_Def;
        part comp_b_cab2 : WheelToAxlePort_Def;
        part comp_distractor_aa58 : IgnitionCmdPort_Distractor_Def;
        connect comp_a_db09.p to comp_b_cab2.p;
    }
}
```

Prompt:
Check the SysML v2 code below for correctness with respect to the given domain constraints.
Repair the code if it is incorrect, produce a corrected version.
If the code is correct, report it as correct.

Domain Rules:
- 'ShaftPort_b' belongs to Domain: mechanical_torque
- 'WheelToAxlePort' belongs to Domain: mechanical_torque
- 'IgnitionCmdPort' belongs to Domain: command_signal

Valid Connections Rules:
- command_signal can ONLY connect to: ['command_signal']
- mechanical_torque can ONLY connect to: ['mechanical_torque']

Code:
```sysml
package Vehicle_Remix_0820_2b45 {
    port def WheelToAxlePort;
    port def IgnitionCmdPort;
    port def ShaftPort_b;
    part def ShaftPort_b_Def { port p : ShaftPort_b; }
    part def WheelToAxlePort_Def { port p : WheelToAxlePort; }
    part def IgnitionCmdPort_Distractor_Def { port p : IgnitionCmdPort; }
    part def SubSystem_Context {
        part comp_a_db09 : ShaftPort_b_Def;
        part comp_b_cab2 : WheelToAxlePort_Def;
        part comp_distractor_aa58 : IgnitionCmdPort_Distractor_Def;
        connect comp_a_db09.p to comp_b_cab2.p;
    }
}
```

CODE STATUS = CORRECT
NO CHANGES REQUIRED


The following SysML v2 code contains compiler-reported syntax errors.
Repair the code so that it compiles successfully.

Compiler Error:
ERROR:no viable alternative at input 'flow' (863.sysml line : 33 column : 3)
ERROR:no viable alternative at input 'action' (863.sysml line : 33 column : 21)
ERROR:no viable alternative at input '.' (863.sysml line : 33 column : 24)
ERROR:no viable alternative at input 'action' (863.sysml line : 34 column : 3)
ERROR:no viable alternative at input 'send' (863.sysml line : 34 column : 14)
ERROR:no viable alternative at input 'send' (863.sysml line : 37 column : 15)
ERROR:no viable alternative at input 'to' (863.sysml line : 37 column : 29)
ERROR:no viable alternative at input '.' (863.sysml line : 37 column : 34)
ERROR:missing EOF at '}' (863.sysml line : 39 column : 2)

Code:
```sysml
package ActionTest {
	action def A{ in x; }
	action a: A {
		first start;
		action b { in y = x; }
		bind x = b.y;
	}
	attribute def S;
	action a1 {
		first start;
		then merge m;
		then accept S;
		then accept sig after 10[SI::s];
		then accept at new Time::Iso8601DateTime("2022-01-30T01:00:00Z");
		then send new S() to b;
		then accept when b.f;
		then decide;
			if true then m;
			else done;
	}
	action a2 {
		in s : S;
		action aa {
			out part target;
		}
		flow aa.target to snd.receiver
		action snd send {
			in :>> payload = s;
		}
		action snd2 send via this to aa.target;
		bind s = snd2.payload;
	}
	action b {
		attribute f : ScalarValues::Boolean;
		ref action a : A;
	}
	action def c {
		first start;
		then action c1 {
			terminate c1;
		}
		then terminate;
	}
}
```

Prompt:
The following SysML v2 code contains compiler-reported syntax errors.
Repair the code so that it compiles successfully.

Compiler Error:
ERROR:no viable alternative at input 'flow' (863.sysml line : 33 column : 3)
ERROR:no viable alternative at input 'action' (863.sysml line : 33 column : 21)
ERROR:no viable alternative at input '.' (863.sysml line : 33 column : 24)
ERROR:no viable alternative at input 'action' (863.sysml line : 34 column : 3)
ERROR:no viable alternative at input 'send' (863.sysml line : 34 column : 14)
ERROR:no viable alternative at input 'send' (863.sysml line : 37 column : 15)
ERROR:no viable alternative at input 'to' (863.sysml line : 37 column : 29)
ERROR:no viable alternative at input '.' (863.sysml line : 37 column : 34)
ERROR:missing EOF at '}' (863.sysml line : 39 column : 2)

Code:
```sysml
package ActionTest {
	action def A{ in x; }
	action a: A {
		first start;
		action b { in y = x; }
		bind x = b.y;
	}
	attribute def S;
	action a1 {
		first start;
		then merge m;
		then accept S;
		then accept sig after 10[SI::s];
		then accept at new Time::Iso8601DateTime("2022-01-30T01:00:00Z");
		then send new S() to b;
		then accept when b.f;
		then decide;
			if true then m;
			else done;
	}
	action a2 {
		in s : S;
		action aa {
			out part target;
		}
		flow aa.target to snd.receiver
		action snd send {
			in :>> payload = s;
		}
		action snd2 send via this to aa.target;
		bind s = snd2.payload;
	}
	action b {
		attribute f : ScalarValues::Boolean;
		ref action a : A;
	}
	action def c {
		first start;
		then action c1 {
			terminate c1;
		}
		then terminate;
	}
}
```

CODE STATUS = INCORRECT
```sysml
package ActionTest {
	action def A{ in x; }
	action a: A {
		first start;
		action b { in y = x; }
		bind x = b.y;
	}
	attribute def S;
	action a1 {
		first start;
		then merge m;
		then accept S;
		then accept sig after 10[SI::s];
		then accept at new Time::Iso8601DateTime("2022-01-30T01:00:00Z");
		then send new S() to b;
		then accept when b.f;
		then decide;
			if true then m;
			else done;
	}
	action a2 {
		in s : S;
		action aa {
			out part target;
		}
		flow aa.target to snd.receiver;
		action snd send {
			in :>> payload = s;
		}
		action snd2 send via this to aa.target;
		bind s = snd2.payload;
	}
	action b {
		attribute f : ScalarValues::Boolean;
		ref action a : A;
	}
	action def c {
		first start;
		then action c1 {
			terminate c1;
		}
		then terminate;
	}
}
```

CODE STATUS = INCORRECT
```sysml
@@ -23,7 +23,7 @@
 		action aa {
 			out part target;
 		}
-		flow aa.target to snd.receiver
+		flow aa.target to snd.receiver;
 		action snd send {
 			in :>> payload = s;
 		}
```


The following SysML v2 code contains compiler-reported syntax errors.
Repair the code so that it compiles successfully.

Compiler Error:
ERROR:Couldn't resolve reference to Membership 'SystemModel::vehicle'. (10332.sysml line : 48 column : 11)

Code:
```sysml
package '11a-View-Viewpoint' {
	package SystemModel {
		private import SI::*;
		part def Vehicle;
		part def AxleAssembly;
		part def Axle;
		part def Wheel;
		part vehicle_BROKEN : Vehicle {
			attribute mass :> ISQ::mass = 2500[SI::kg];
			part frontAxleAssembly : AxleAssembly[1] {
				attribute mass :> ISQ::mass = 150[kg];
				part frontWheel : Wheel[2];
				part frontAxle : Axle[1] {
					attribute mass;
					attribute steeringAngle;
				}
			}
			part rearAxleAssembly : AxleAssembly[1] {
				attribute mass :> ISQ::mass = 250[kg];
				part rearWheel : Wheel[2];
				part rearAxle : Axle[1] {
					attribute mass;
				}
			}
		}
	}
	package ViewModel {
		private import Views::*;
		part 'systems engineer';
		concern 'system breakdown' {
			subject;
			stakeholder :>> 'systems engineer';
		}
		viewpoint 'system structure perspective' {
			frame 'system breakdown';
		}
		view 'system structure generation' {
			satisfy 'system structure perspective';
			expose SystemModel::vehicle::**[@SysML::PartUsage];
			render asElementTable {
				view :>> columnView[1] {
					render asTextualNotation;
				}
			}
		}
	}
}
```

Prompt:
The following SysML v2 code contains compiler-reported syntax errors.
Repair the code so that it compiles successfully.

Compiler Error:
ERROR:Couldn't resolve reference to Membership 'SystemModel::vehicle'. (10332.sysml line : 48 column : 11)

Code:
```sysml
package '11a-View-Viewpoint' {
	package SystemModel {
		private import SI::*;
		part def Vehicle;
		part def AxleAssembly;
		part def Axle;
		part def Wheel;
		part vehicle_BROKEN : Vehicle {
			attribute mass :> ISQ::mass = 2500[SI::kg];
			part frontAxleAssembly : AxleAssembly[1] {
				attribute mass :> ISQ::mass = 150[kg];
				part frontWheel : Wheel[2];
				part frontAxle : Axle[1] {
					attribute mass;
					attribute steeringAngle;
				}
			}
			part rearAxleAssembly : AxleAssembly[1] {
				attribute mass :> ISQ::mass = 250[kg];
				part rearWheel : Wheel[2];
				part rearAxle : Axle[1] {
					attribute mass;
				}
			}
		}
	}
	package ViewModel {
		private import Views::*;
		part 'systems engineer';
		concern 'system breakdown' {
			subject;
			stakeholder :>> 'systems engineer';
		}
		viewpoint 'system structure perspective' {
			frame 'system breakdown';
		}
		view 'system structure generation' {
			satisfy 'system structure perspective';
			expose SystemModel::vehicle::**[@SysML::PartUsage];
			render asElementTable {
				view :>> columnView[1] {
					render asTextualNotation;
				}
			}
		}
	}
}
```

CODE STATUS = INCORRECT
```sysml
package '11a-View-Viewpoint' {
	package SystemModel {
		private import SI::*;
		part def Vehicle;
		part def AxleAssembly;
		part def Axle;
		part def Wheel;
		part vehicle : Vehicle {
			attribute mass :> ISQ::mass = 2500[SI::kg];
			part frontAxleAssembly : AxleAssembly[1] {
				attribute mass :> ISQ::mass = 150[kg];
				part frontWheel : Wheel[2];
				part frontAxle : Axle[1] {
					attribute mass;
					attribute steeringAngle;
				}
			}
			part rearAxleAssembly : AxleAssembly[1] {
				attribute mass :> ISQ::mass = 250[kg];
				part rearWheel : Wheel[2];
				part rearAxle : Axle[1] {
					attribute mass;
				}
			}
		}
	}
	package ViewModel {
		private import Views::*;
		part 'systems engineer';
		concern 'system breakdown' {
			subject;
			stakeholder :>> 'systems engineer';
		}
		viewpoint 'system structure perspective' {
			frame 'system breakdown';
		}
		view 'system structure generation' {
			satisfy 'system structure perspective';
			expose SystemModel::vehicle::**[@SysML::PartUsage];
			render asElementTable {
				view :>> columnView[1] {
					render asTextualNotation;
				}
			}
		}
	}
}
```

CODE STATUS = INCORRECT
```sysml
@@ -5,7 +5,7 @@
 		part def AxleAssembly;
 		part def Axle;
 		part def Wheel;
-		part vehicle_BROKEN : Vehicle {
+		part vehicle : Vehicle {
 			attribute mass :> ISQ::mass = 2500[SI::kg];
 			part frontAxleAssembly : AxleAssembly[1] {
 				attribute mass :> ISQ::mass = 150[kg];
```


ERROR:Domain violation: Port 'comp_a_4602.p' (electrical_power) cannot connect to 'comp_distractor_19fe.p' (mechanical_fastening) (line : 21)

Check the SysML v2 code below for correctness with respect to the given domain constraints.
Repair the code if it is incorrect, produce a corrected version.
If the code is correct, report it as correct.

Code:
```sysml
package Vehicle_Remix_0687_f5aa {
    port def MotorInput;
    port def ShankCompositePort;
    part def MotorInput_Def { port p : MotorInput; }
    part def MotorInput_Def { port p : MotorInput; }
    part def ShankCompositePort_Distractor_Def { port p : ShankCompositePort; }
    part def SubSystem_Context {
        part comp_a_4602 : MotorInput_Def;
        part comp_b_1e78 : MotorInput_Def;
        part comp_distractor_19fe : ShankCompositePort_Distractor_Def;
        connect comp_a_4602.p to comp_distractor_19fe.p;
    }
}
```

Prompt:
Check the SysML v2 code below for correctness with respect to the given domain constraints.
Repair the code if it is incorrect, produce a corrected version.
If the code is correct, report it as correct.

Domain Rules:
- 'MotorInput' belongs to Domain: electrical_power
- 'ShankCompositePort' belongs to Domain: mechanical_fastening

Valid Connections Rules:
- electrical_power can ONLY connect to: ['electrical_power']
- mechanical_fastening can ONLY connect to: ['mechanical_fastening']

Code:
```sysml
package Vehicle_Remix_0687_f5aa {
    port def MotorInput;
    port def ShankCompositePort;
    part def MotorInput_Def { port p : MotorInput; }
    part def MotorInput_Def { port p : MotorInput; }
    part def ShankCompositePort_Distractor_Def { port p : ShankCompositePort; }
    part def SubSystem_Context {
        part comp_a_4602 : MotorInput_Def;
        part comp_b_1e78 : MotorInput_Def;
        part comp_distractor_19fe : ShankCompositePort_Distractor_Def;
        connect comp_a_4602.p to comp_distractor_19fe.p;
    }
}
```

CODE STATUS = INCORRECT
```sysml
package Vehicle_Remix_0687_f5aa {
    port def MotorInput;
    port def ShankCompositePort;
    part def MotorInput_Def { port p : MotorInput; }
    part def MotorInput_Def { port p : MotorInput; }
    part def ShankCompositePort_Distractor_Def { port p : ShankCompositePort; }
    part def SubSystem_Context {
        part comp_a_4602 : MotorInput_Def;
        part comp_b_1e78 : MotorInput_Def;
        part comp_distractor_19fe : ShankCompositePort_Distractor_Def;
        connect comp_a_4602.p to comp_b_1e78.p;
    }
}
```

CODE STATUS = INCORRECT
```sysml
@@ -8,6 +8,6 @@
         part comp_a_4602 : MotorInput_Def;
         part comp_b_1e78 : MotorInput_Def;
         part comp_distractor_19fe : ShankCompositePort_Distractor_Def;
-        connect comp_a_4602.p to comp_distractor_19fe.p;
+        connect comp_a_4602.p to comp_b_1e78.p;
     }
 }
```


ERROR:Domain violation: Port 'comp_a_ed6e.p' (command_signal) cannot connect to 'comp_distractor_1ac4.p' (mechanical_torque) (line : 21)

Check the SysML v2 code below for correctness with respect to the given domain constraints.
Repair the code if it is incorrect, produce a corrected version.
If the code is correct, report it as correct.

Code:
```sysml
package Vehicle_Remix_0429_90c5 {
    port def FuelCmdPort;
    port def AxleMountIF;
    part def FuelCmdPort_Def { port p : FuelCmdPort; }
    part def FuelCmdPort_Def { port p : FuelCmdPort; }
    part def AxleMountIF_Distractor_Def { port p : AxleMountIF; }
    part def SubSystem_Context {
        part comp_a_ed6e : FuelCmdPort_Def;
        part comp_b_c805 : FuelCmdPort_Def;
        part comp_distractor_1ac4 : AxleMountIF_Distractor_Def;
        connect comp_a_ed6e.p to comp_distractor_1ac4.p;
    }
}
```

Prompt:
Check the SysML v2 code below for correctness with respect to the given domain constraints.
Repair the code if it is incorrect, produce a corrected version.
If the code is correct, report it as correct.

Domain Rules:
- 'AxleMountIF' belongs to Domain: mechanical_torque
- 'FuelCmdPort' belongs to Domain: command_signal

Valid Connections Rules:
- command_signal can ONLY connect to: ['command_signal']
- mechanical_torque can ONLY connect to: ['mechanical_torque']

Code:
```sysml
package Vehicle_Remix_0429_90c5 {
    port def FuelCmdPort;
    port def AxleMountIF;
    part def FuelCmdPort_Def { port p : FuelCmdPort; }
    part def FuelCmdPort_Def { port p : FuelCmdPort; }
    part def AxleMountIF_Distractor_Def { port p : AxleMountIF; }
    part def SubSystem_Context {
        part comp_a_ed6e : FuelCmdPort_Def;
        part comp_b_c805 : FuelCmdPort_Def;
        part comp_distractor_1ac4 : AxleMountIF_Distractor_Def;
        connect comp_a_ed6e.p to comp_distractor_1ac4.p;
    }
}
```

CODE STATUS = INCORRECT
```sysml
package Vehicle_Remix_0429_90c5 {
    port def FuelCmdPort;
    port def AxleMountIF;
    part def FuelCmdPort_Def { port p : FuelCmdPort; }
    part def FuelCmdPort_Def { port p : FuelCmdPort; }
    part def AxleMountIF_Distractor_Def { port p : AxleMountIF; }
    part def SubSystem_Context {
        part comp_a_ed6e : FuelCmdPort_Def;
        part comp_b_c805 : FuelCmdPort_Def;
        part comp_distractor_1ac4 : AxleMountIF_Distractor_Def;
        connect comp_a_ed6e.p to comp_b_c805.p;
    }
}
```

CODE STATUS = INCORRECT
```sysml
@@ -8,6 +8,6 @@
         part comp_a_ed6e : FuelCmdPort_Def;
         part comp_b_c805 : FuelCmdPort_Def;
         part comp_distractor_1ac4 : AxleMountIF_Distractor_Def;
-        connect comp_a_ed6e.p to comp_distractor_1ac4.p;
+        connect comp_a_ed6e.p to comp_b_c805.p;
     }
 }
```