local-test-commons-compress-full-01-vuln_5/fuzz-tooling/infra/base-images/base-runner/bad_build_check

#!/bin/bash -u
# Copyright 2017 Google Inc.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
################################################################################

# A minimal number of runs to test fuzz target with a non-empty input.
MIN_NUMBER_OF_RUNS=4

# The "example" target has 73 with ASan, 65 with UBSan, and 6648 with MSan.
# Real world targets have greater values (arduinojson: 407, zlib: 664).
# Mercurial's bdiff_fuzzer has 116 PCs when built with ASan.
THRESHOLD_FOR_NUMBER_OF_EDGES=100

# A fuzz target is supposed to have at least two functions, such as
# LLVMFuzzerTestOneInput and an API that is being called from there.
THRESHOLD_FOR_NUMBER_OF_FUNCTIONS=2

# Threshold values for different sanitizers used by instrumentation checks.
ASAN_CALLS_THRESHOLD_FOR_ASAN_BUILD=1000
ASAN_CALLS_THRESHOLD_FOR_NON_ASAN_BUILD=0

# The value below can definitely be higher (like 500-1000), but avoid being too
# agressive here while still evaluating the DFT-based fuzzing approach.
DFSAN_CALLS_THRESHOLD_FOR_DFSAN_BUILD=100
DFSAN_CALLS_THRESHOLD_FOR_NON_DFSAN_BUILD=0

MSAN_CALLS_THRESHOLD_FOR_MSAN_BUILD=1000
# Some engines (e.g. honggfuzz) may make a very small number of calls to msan
# for memory poisoning.
MSAN_CALLS_THRESHOLD_FOR_NON_MSAN_BUILD=3

# Usually, a non UBSan build (e.g. ASan) has 165 calls to UBSan runtime. The
# majority of targets built with UBSan have 200+ UBSan calls, but there are
# some very small targets that may have < 200 UBSan calls even in a UBSan build.
# Use the threshold value of 168 (slightly > 165) for UBSan build.
UBSAN_CALLS_THRESHOLD_FOR_UBSAN_BUILD=168

# It would be risky to use the threshold value close to 165 for non UBSan build,
# as UBSan runtime may change any time and thus we could have different number
# of calls to UBSan runtime even in ASan build. With that, we use the threshold
# value of 200 that would detect unnecessary UBSan instrumentation in the vast
# majority of targets, except of a handful very small ones, which would not be
# a big concern either way as the overhead for them would not be significant.
UBSAN_CALLS_THRESHOLD_FOR_NON_UBSAN_BUILD=200

# ASan builds on i386 generally have about 250 UBSan runtime calls.
if [[ $ARCHITECTURE == 'i386' ]]
then
  UBSAN_CALLS_THRESHOLD_FOR_NON_UBSAN_BUILD=280
fi


# Verify that the given fuzz target is correctly built to run with a particular
# engine.
function check_engine {
  local FUZZER=$1
  local FUZZER_NAME=$(basename $FUZZER)
  local FUZZER_OUTPUT="/tmp/$FUZZER_NAME.output"
  local CHECK_FAILED=0

  if [[ "$FUZZING_ENGINE" == libfuzzer ]]; then
    # Store fuzz target's output into a temp file to be used for further checks.
    $FUZZER -seed=1337 -runs=$MIN_NUMBER_OF_RUNS &>$FUZZER_OUTPUT
    CHECK_FAILED=$(egrep "ERROR: no interesting inputs were found. Is the code instrumented" -c $FUZZER_OUTPUT)
    if (( $CHECK_FAILED > 0 )); then
      echo "BAD BUILD: $FUZZER does not seem to have coverage instrumentation."
      cat $FUZZER_OUTPUT
      # Bail out as the further check does not make any sense, there are 0 PCs.
      return 1
    fi

    local NUMBER_OF_EDGES=$(grep -Po "INFO: Loaded [[:digit:]]+ module.*\(.*(counters|guards)\):[[:space:]]+\K[[:digit:]]+" $FUZZER_OUTPUT)

    # If a fuzz target fails to start, grep won't find anything, so bail out early to let check_startup_crash deal with it.
    [[ -z "$NUMBER_OF_EDGES" ]] && return

    if (( $NUMBER_OF_EDGES < $THRESHOLD_FOR_NUMBER_OF_EDGES )); then
      echo "BAD BUILD: $FUZZER seems to have only partial coverage instrumentation."
    fi
  elif [[ "$FUZZING_ENGINE" == afl ]]; then
    AFL_FORKSRV_INIT_TMOUT=30000 AFL_NO_UI=1 SKIP_SEED_CORPUS=1 timeout --preserve-status -s INT 35s run_fuzzer $FUZZER_NAME &>$FUZZER_OUTPUT
    CHECK_PASSED=$(egrep "All set and ready to roll" -c $FUZZER_OUTPUT)
    if (( $CHECK_PASSED == 0 )); then
      echo "BAD BUILD: fuzzing $FUZZER with afl-fuzz failed."
      cat $FUZZER_OUTPUT
      return 1
    fi
  elif [[ "$FUZZING_ENGINE" == honggfuzz ]]; then
    SKIP_SEED_CORPUS=1 timeout --preserve-status -s INT 20s run_fuzzer $FUZZER_NAME &>$FUZZER_OUTPUT
    CHECK_PASSED=$(egrep "^Sz:[0-9]+ Tm:[0-9]+" -c $FUZZER_OUTPUT)
    if (( $CHECK_PASSED == 0 )); then
      echo "BAD BUILD: fuzzing $FUZZER with honggfuzz failed."
      cat $FUZZER_OUTPUT
      return 1
    fi
  elif [[ "$FUZZING_ENGINE" == dataflow ]]; then
    $FUZZER &> $FUZZER_OUTPUT
    local NUMBER_OF_FUNCTIONS=$(grep -Po "INFO:\s+\K[[:digit:]]+(?=\s+instrumented function.*)" $FUZZER_OUTPUT)
    [[ -z "$NUMBER_OF_FUNCTIONS" ]] && NUMBER_OF_FUNCTIONS=0
    if (( $NUMBER_OF_FUNCTIONS < $THRESHOLD_FOR_NUMBER_OF_FUNCTIONS )); then
      echo "BAD BUILD: $FUZZER does not seem to be properly built in 'dataflow' config."
      cat $FUZZER_OUTPUT
      return 1
    fi
  elif [[ "$FUZZING_ENGINE" == centipede \
          && ("${HELPER:-}" == True || "$SANITIZER" == none ) ]]; then
    # Performs run test on unsanitized binaries with auxiliary sanitized
    # binaries if they are built with helper.py.
    # Performs run test on unsanitized binaries without auxiliary sanitized
    # binaries if they are from trial build and production build.
    # TODO(Dongge): Support run test with sanitized binaries for trial and
    # production build.
    SKIP_SEED_CORPUS=1 timeout --preserve-status -s INT 20s run_fuzzer $FUZZER_NAME &>$FUZZER_OUTPUT
    CHECK_PASSED=$(egrep "\[S0.0] begin-fuzz: ft: 0 corp: 0/0" -c $FUZZER_OUTPUT)
    if (( $CHECK_PASSED == 0 )); then
      echo "BAD BUILD: fuzzing $FUZZER with centipede failed."
      cat $FUZZER_OUTPUT
      return 1
    fi
  fi
  
  return 0
}

# Verify that the given fuzz target has been built properly and works.
function check_startup_crash {
  local FUZZER=$1
  local FUZZER_NAME=$(basename $FUZZER)
  local FUZZER_OUTPUT="/tmp/$FUZZER_NAME.output"
  local CHECK_PASSED=0

  if [[ "$FUZZING_ENGINE" = libfuzzer ]]; then
    # Skip seed corpus as there is another explicit check that uses seed corpora.
    SKIP_SEED_CORPUS=1 run_fuzzer $FUZZER_NAME -seed=1337 -runs=$MIN_NUMBER_OF_RUNS &>$FUZZER_OUTPUT
    CHECK_PASSED=$(egrep "Done $MIN_NUMBER_OF_RUNS runs" -c $FUZZER_OUTPUT)
  elif [[ "$FUZZING_ENGINE" = afl ]]; then
    AFL_FORKSRV_INIT_TMOUT=30000 AFL_NO_UI=1 SKIP_SEED_CORPUS=1 timeout --preserve-status -s INT 35s run_fuzzer $FUZZER_NAME &>$FUZZER_OUTPUT
    if [ $(egrep "target binary (crashed|terminated)" -c $FUZZER_OUTPUT) -eq 0 ]; then
      CHECK_PASSED=1
    fi
  elif [[ "$FUZZING_ENGINE" = dataflow ]]; then
    # TODO(https://github.com/google/oss-fuzz/issues/1632): add check for
    # binaries compiled with dataflow engine when the interface becomes stable.
    CHECK_PASSED=1
  else
    # TODO: add checks for another fuzzing engines if possible.
    CHECK_PASSED=1
  fi

  if [ "$CHECK_PASSED" -eq "0" ]; then
    echo "BAD BUILD: $FUZZER seems to have either startup crash or exit:"
    cat $FUZZER_OUTPUT
    return 1
  fi

  return 0
}

# Mixed sanitizers check for ASan build.
function check_asan_build {
  local FUZZER=$1
  local ASAN_CALLS=$2
  local DFSAN_CALLS=$3
  local MSAN_CALLS=$4
  local UBSAN_CALLS=$5

  # Perform all the checks for more detailed error message.
  if (( $ASAN_CALLS < $ASAN_CALLS_THRESHOLD_FOR_ASAN_BUILD )); then
    echo "BAD BUILD: $FUZZER does not seem to be compiled with ASan."
    return 1
  fi

  if (( $DFSAN_CALLS > $DFSAN_CALLS_THRESHOLD_FOR_NON_DFSAN_BUILD )); then
    echo "BAD BUILD: ASan build of $FUZZER seems to be compiled with DFSan."
    return 1
  fi

  if (( $MSAN_CALLS > $MSAN_CALLS_THRESHOLD_FOR_NON_MSAN_BUILD )); then
    echo "BAD BUILD: ASan build of $FUZZER seems to be compiled with MSan."
    return 1
  fi

  if (( $UBSAN_CALLS > $UBSAN_CALLS_THRESHOLD_FOR_NON_UBSAN_BUILD )); then
    echo "BAD BUILD: ASan build of $FUZZER seems to be compiled with UBSan."
    return 1
  fi

  return 0
}

# Mixed sanitizers check for DFSan build.
function check_dfsan_build {
  local FUZZER=$1
  local ASAN_CALLS=$2
  local DFSAN_CALLS=$3
  local MSAN_CALLS=$4
  local UBSAN_CALLS=$5

  # Perform all the checks for more detailed error message.
  if (( $ASAN_CALLS > $ASAN_CALLS_THRESHOLD_FOR_NON_ASAN_BUILD )); then
    echo "BAD BUILD: DFSan build of $FUZZER seems to be compiled with ASan."
    return 1
  fi

  if (( $DFSAN_CALLS < $DFSAN_CALLS_THRESHOLD_FOR_DFSAN_BUILD )); then
    echo "BAD BUILD: $FUZZER does not seem to be compiled with DFSan."
    return 1
  fi

  if (( $MSAN_CALLS > $MSAN_CALLS_THRESHOLD_FOR_NON_MSAN_BUILD )); then
    echo "BAD BUILD: ASan build of $FUZZER seems to be compiled with MSan."
    return 1
  fi

  if (( $UBSAN_CALLS > $UBSAN_CALLS_THRESHOLD_FOR_NON_UBSAN_BUILD )); then
    echo "BAD BUILD: ASan build of $FUZZER seems to be compiled with UBSan."
    return 1
  fi

  return 0
}


# Mixed sanitizers check for MSan build.
function check_msan_build {
  local FUZZER=$1
  local ASAN_CALLS=$2
  local DFSAN_CALLS=$3
  local MSAN_CALLS=$4
  local UBSAN_CALLS=$5

  # Perform all the checks for more detailed error message.
  if (( $ASAN_CALLS > $ASAN_CALLS_THRESHOLD_FOR_NON_ASAN_BUILD )); then
    echo "BAD BUILD: MSan build of $FUZZER seems to be compiled with ASan."
    return 1
  fi

  if (( $DFSAN_CALLS > $DFSAN_CALLS_THRESHOLD_FOR_NON_DFSAN_BUILD )); then
    echo "BAD BUILD: MSan build of $FUZZER seems to be compiled with DFSan."
    return 1
  fi

  if (( $MSAN_CALLS < $MSAN_CALLS_THRESHOLD_FOR_MSAN_BUILD )); then
    echo "BAD BUILD: $FUZZER does not seem to be compiled with MSan."
    return 1
  fi

  if (( $UBSAN_CALLS > $UBSAN_CALLS_THRESHOLD_FOR_NON_UBSAN_BUILD )); then
    echo "BAD BUILD: MSan build of $FUZZER seems to be compiled with UBSan."
    return 1
  fi

  return 0
}

# Mixed sanitizers check for UBSan build.
function check_ubsan_build {
  local FUZZER=$1
  local ASAN_CALLS=$2
  local DFSAN_CALLS=$3
  local MSAN_CALLS=$4
  local UBSAN_CALLS=$5

  if [[ "$FUZZING_ENGINE" != libfuzzer ]]; then
    # Ignore UBSan checks for fuzzing engines other than libFuzzer because:
    # A) we (probably) are not going to use those with UBSan
    # B) such builds show indistinguishable number of calls to UBSan
    return 0
  fi

  # Perform all the checks for more detailed error message.
  if (( $ASAN_CALLS > $ASAN_CALLS_THRESHOLD_FOR_NON_ASAN_BUILD )); then
    echo "BAD BUILD: UBSan build of $FUZZER seems to be compiled with ASan."
    return 1
  fi

  if (( $DFSAN_CALLS > $DFSAN_CALLS_THRESHOLD_FOR_NON_DFSAN_BUILD )); then
    echo "BAD BUILD: UBSan build of $FUZZER seems to be compiled with DFSan."
    return 1
  fi

  if (( $MSAN_CALLS > $MSAN_CALLS_THRESHOLD_FOR_NON_MSAN_BUILD )); then
    echo "BAD BUILD: UBSan build of $FUZZER seems to be compiled with MSan."
    return 1
  fi

  if (( $UBSAN_CALLS < $UBSAN_CALLS_THRESHOLD_FOR_UBSAN_BUILD )); then
    echo "BAD BUILD: $FUZZER does not seem to be compiled with UBSan."
    return 1
  fi
}

# Verify that the given fuzz target is compiled with correct sanitizer.
function check_mixed_sanitizers {
  local FUZZER=$1
  local result=0
  local CALL_INSN=

  if [ "${FUZZING_LANGUAGE:-}" = "jvm" ]; then
    # Sanitizer runtime is linked into the Jazzer driver, so this check does not
    # apply.
    return 0
  fi

  if [ "${FUZZING_LANGUAGE:-}" = "javascript" ]; then
    # Jazzer.js currently does not support using sanitizers with native Node.js addons.
    # This is not relevant anyways since supporting this will be done by preloading
    # the sanitizers in the wrapper script starting Jazzer.js.
    return 0
  fi

  if [ "${FUZZING_LANGUAGE:-}" = "python" ]; then
    # Sanitizer runtime is loaded via LD_PRELOAD, so this check does not apply.
    return 0
  fi

  # For fuzztest fuzzers point to the binary instead of launcher script.
  if [[ $FUZZER == *"@"* ]]; then
    FUZZER=(${FUZZER//@/ }[0])
  fi

  CALL_INSN=
  if [[ $ARCHITECTURE == "x86_64" ]]
  then
    CALL_INSN="callq?\s+[0-9a-f]+\s+<"
  elif [[ $ARCHITECTURE == "i386" ]]
  then
    CALL_INSN="call\s+[0-9a-f]+\s+<"
  elif [[ $ARCHITECTURE == "aarch64" ]]
  then
    CALL_INSN="bl\s+[0-9a-f]+\s+<"
  else
    echo "UNSUPPORTED ARCHITECTURE"
    exit 1
  fi
  local ASAN_CALLS=$(objdump -dC $FUZZER | egrep "${CALL_INSN}__asan" -c)
  local DFSAN_CALLS=$(objdump -dC $FUZZER | egrep "${CALL_INSN}__dfsan" -c)
  local MSAN_CALLS=$(objdump -dC $FUZZER | egrep "${CALL_INSN}__msan" -c)
  local UBSAN_CALLS=$(objdump -dC $FUZZER | egrep "${CALL_INSN}__ubsan" -c)


  if [[ "$SANITIZER" = address ]]; then
    check_asan_build $FUZZER $ASAN_CALLS $DFSAN_CALLS $MSAN_CALLS $UBSAN_CALLS
    result=$?
  elif [[ "$SANITIZER" = dataflow ]]; then
    check_dfsan_build $FUZZER $ASAN_CALLS $DFSAN_CALLS $MSAN_CALLS $UBSAN_CALLS
    result=$?
  elif [[ "$SANITIZER" = memory ]]; then
    check_msan_build $FUZZER $ASAN_CALLS $DFSAN_CALLS $MSAN_CALLS $UBSAN_CALLS
    result=$?
  elif [[ "$SANITIZER" = undefined ]]; then
    check_ubsan_build $FUZZER $ASAN_CALLS $DFSAN_CALLS $MSAN_CALLS $UBSAN_CALLS
    result=$?
  elif [[ "$SANITIZER" = thread ]]; then
    # TODO(metzman): Implement this.
    result=0
  fi

  return $result
}

# Verify that the given fuzz target doesn't crash on the seed corpus.
function check_seed_corpus {
  local FUZZER=$1
  local FUZZER_NAME="$(basename $FUZZER)"
  local FUZZER_OUTPUT="/tmp/$FUZZER_NAME.output"

  if [[ "$FUZZING_ENGINE" != libfuzzer ]]; then
    return 0
  fi

  # Set up common fuzzing arguments, otherwise "run_fuzzer" errors out.
  if [ -z "$FUZZER_ARGS" ]; then
    export FUZZER_ARGS="-rss_limit_mb=2560 -timeout=25"
  fi

  bash -c "run_fuzzer $FUZZER_NAME -runs=0" &> $FUZZER_OUTPUT

  # Don't output anything if fuzz target hasn't crashed.
  if [ $? -ne 0 ]; then
    echo "BAD BUILD: $FUZZER has a crashing input in its seed corpus:"
    cat $FUZZER_OUTPUT
    return 1
  fi

  return 0
}

function check_architecture {
  local FUZZER=$1
  local FUZZER_NAME=$(basename $FUZZER)

  if [ "${FUZZING_LANGUAGE:-}" = "jvm" ]; then
    # The native dependencies of a JVM project are not packaged, but loaded
    # dynamically at runtime and thus cannot be checked here.
    return 0;
  fi

  if [ "${FUZZING_LANGUAGE:-}" = "javascript" ]; then
    # Jazzer.js fuzzers are wrapper scripts that start the fuzz target with
    # the Jazzer.js CLI.
    return 0;
  fi

  if [ "${FUZZING_LANGUAGE:-}" = "python" ]; then
    FUZZER=${FUZZER}.pkg
  fi

  # For fuzztest fuzzers point to the binary instead of launcher script.
  if [[ $FUZZER == *"@"* ]]; then
    FUZZER=(${FUZZER//@/ }[0])
  fi

  FILE_OUTPUT=$(file $FUZZER)
  if [[ $ARCHITECTURE == "x86_64" ]]
  then
    echo $FILE_OUTPUT | grep "x86-64" > /dev/null
  elif [[ $ARCHITECTURE == "i386" ]]
  then
    echo $FILE_OUTPUT | grep "80386" > /dev/null
  elif [[ $ARCHITECTURE == "aarch64" ]]
  then
    echo $FILE_OUTPUT | grep "aarch64" > /dev/null
  else
    echo "UNSUPPORTED ARCHITECTURE"
    return 1
  fi
  result=$?
  if [[ $result != 0 ]]
  then
    echo "BAD BUILD $FUZZER is not built for architecture: $ARCHITECTURE"
    echo "file command output: $FILE_OUTPUT"
    echo "check_mixed_sanitizers test will fail."
  fi
  return $result
}

function main {
  local FUZZER=$1
  local AUXILIARY_FUZZER=${2:-}
  local checks_failed=0
  local result=0

  export RUN_FUZZER_MODE="batch"
  check_engine $FUZZER
  result=$?
  checks_failed=$(( $checks_failed + $result ))

  check_architecture $FUZZER
  result=$?
  checks_failed=$(( $checks_failed + $result ))

  if [[ "$FUZZING_ENGINE" == centipede \
        && "$SANITIZER" != none && "${HELPER:-}" == True ]]; then
    check_mixed_sanitizers $AUXILIARY_FUZZER
   else
    check_mixed_sanitizers $FUZZER
  fi
  result=$?
  checks_failed=$(( $checks_failed + $result ))

  check_startup_crash $FUZZER
  result=$?
  checks_failed=$(( $checks_failed + $result ))

  # TODO: re-enable after introducing bug auto-filing for bad builds.
  # check_seed_corpus $FUZZER
  return $checks_failed
}


if [ $# -ne 1 -a $# -ne 2 ]; then
  echo "Usage: $0 <fuzz_target_binary> [<auxiliary_binary>]"
  exit 1
fi

# Fuzz target path.
FUZZER=$1
AUXILIARY_FUZZER=${2:-}

main $FUZZER $AUXILIARY_FUZZER
exit $?