diff --git "a/arxiv\\materials\\arxiv_papers_20241221_083517.json" "b/arxiv\\materials\\arxiv_papers_20241221_083517.json" --- "a/arxiv\\materials\\arxiv_papers_20241221_083517.json" +++ "b/arxiv\\materials\\arxiv_papers_20241221_083517.json" @@ -1,2661 +1,3 @@ -[ - { - "title": "A finite deformation theory of dislocation thermomechanics", - "authors": [ - "Gabriel Dante Lima-Chaves", - "Amit Acharya", - "Manas Vijay Upadhyay" - ], - "abstract": "A geometrically nonlinear theory for field dislocation thermomechanics based entirely on measurable state variables is proposed. Instead of starting from an ordering-dependent multiplicative decomposition of the total deformation gradient tensor, the additive decomposition of the velocity gradient into elastic, plastic and thermal distortion rates is obtained as a natural consequence of the conservation of the Burgers vector. Based on this equation, the theory consistently captures the contribution of transient heterogeneous temperature fields on the evolution of the (polar) dislocation density. The governing equations of the model are obtained from the conservation of Burgers vector, mass, linear and angular momenta, and the First Law. The Second Law is used to deduce the thermodynamical driving forces for dislocation velocity. An evolution equation for temperature is obtained from the First Law and the Helmholtz free energy density, which is taken as a function of the following measurable quantities: elastic distortion, temperature and the dislocation density (the theory allows prescribing additional measurable quantities as internal state variables if needed). Furthermore, the theory allows one to compute the Taylor-Quinney factor, which is material and strain rate dependent. Accounting for the polar dislocation density as a state variable in the Helmholtz free energy of the system allows for temperature solutions in the form of dispersive waves with finite propagation speed, despite using Fourier's law of heat conduction as the constitutive assumption for the heat flux vector.", - "arxiv_id": "2409.17194v2", - "categories": [ - "cond-mat.mtrl-sci", - "74C20, 74F05", - "J.2" - ], - "primary_category": "cond-mat.mtrl-sci", - "published_date": "2024-09-25T11:18:26Z", - "updated_date": "2024-12-17T08:18:08Z", - "pdf_url": "https://arxiv.org/pdf/2409.17194v2", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2409.17194v2.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Observing Li Nucleation at Li Metal-Solid Electrolyte Interface in All-Solid-State Batteries", - "authors": [ - "Yun An", - "Taiping Hu", - "Quanquan Pang", - "Shenzhen Xu" - ], - "abstract": "Benefiting from the significantly improved energy density and safety, all-solid-state lithium batteries (ASSLBs) are considered one of the most promising next-generation energy technologies. Their practical applications, however, are strongly impeded by the Li dendrite formation. Despite this recognized challenge, a comprehensive understanding of Li dendrite nucleation and formation mechanism remains elusive. In particular, the initial locations of Li dendrite formation are still ambiguous: do Li clusters form directly at the Li anode surface, or inside the bulk solid electrolyte (SE), or within the solid-electrolyte interphase (SEI)? Here, based on the deep-potential molecular dynamics simulations combined with enhanced sampling techniques, we investigate the atomic-level mechanism of Li cluster nucleation and formation at the Li anode/SE interface. We observe that an isolated Li cluster initially forms inside the SEI between the Li6PS5Cl SE and the Li metal anode, located ~1 nm away from the Li anode/SEI boundary. The local electronic structure of the spontaneously formed SEI is found to be a key factor enabling the Li cluster formation within SEI, in which a significantly decreased bandgap could facilitate electronic conduction through the SEI and reduce Li+ ions to metallic Li atoms therein. Our work therefore provides atomic-level insights into Li-dendrite nucleation at anode/SE interfaces in ASSLBs, and could guide future design for developing Li-dendrite-inhibiting strategies.", - "arxiv_id": "2412.12611v1", - "categories": [ - "cond-mat.mtrl-sci" - ], - "primary_category": "cond-mat.mtrl-sci", - "published_date": "2024-12-17T07:19:50Z", - "updated_date": "2024-12-17T07:19:50Z", - "pdf_url": "https://arxiv.org/pdf/2412.12611v1", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2412.12611v1.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Structural and magnetic properties of CoTeMoO6 revisited", - "authors": [ - "Yu Li", - "Jared Coles", - "Xin Gui", - "Hyowon Park", - "Yan Wu", - "Xinglong Chen", - "Jing-han Chen", - "Xiaoping Wang", - "Huibo Cao", - "Shane Stadler", - "Omar Chmaissem", - "David P. Young", - "Stephan Rosenkranz", - "John F. DiTusa" - ], - "abstract": "We have conducted a comprehensive investigation into the magnetic properties of the chiral multiferroic material CoTeMoO6. In contrast with the previous claim of canted antiferromagnetic order with ferromagnetic components, our investigation reveals an antiferromagnetic ground state with compensated moments, providing an interesting platform for exploring exotic material properties. Through careful measurements of magnetization under a series of applied field, we demonstrate that there exist two sequential field-induced magnetic transitions in CoTeMoO6, with one occurring at $H_{c1}$=460 Oe along the a-axis, and the other at $H_{c2}$=1.16 T with the field along the b-axis. The values of H_c1 and H_c2 exhibit strong angular dependence and diverge with different rates as the applied field is rotated 90 degrees within the ab plane. This reflects the distinct nature of these transitions, which is further supported by the different critical behavior of $H_{c1}$ and $H_{c2}$, characterized by the values of $\\gamma$,in the function of $H_c=H_0\\times(1-\\frac{T}{T_c})^n$. Furthermore, we have demonstrated that there exist structural and magnetic twin domains in CoTeMoO6 that strongly affect the experimental measurement of their macroscopic properties. Intriguingly, these twin domains can be related to the orthorhombicity/chirality of the crystal structure with the space group $P2_1 2_1 2$. We further explored the magnetic and structural domains with uniaxial pressure and polarized light microscopy. Our results suggest that CoTeMoO6 could be used as a unique platform for investigating the intriguing physics involving intertwined degrees of freedom. The tunability of the underlying domain distribution and its strong anisotropy could also be useful for developing functional devices and applications.", - "arxiv_id": "2412.11233v1", - "categories": [ - "cond-mat.mtrl-sci" - ], - "primary_category": "cond-mat.mtrl-sci", - "published_date": "2024-12-15T16:11:31Z", - "updated_date": "2024-12-15T16:11:31Z", - "pdf_url": "https://arxiv.org/pdf/2412.11233v1", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2412.11233v1.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "AI-Driven Accelerated Discovery of Intercalation-type Cathode Materials for Magnesium Batteries", - "authors": [ - "Wenjie Chen", - "Zichang Lin", - "Xinxin Zhang", - "Hao Zhou", - "Yuegang Zhang" - ], - "abstract": "Magnesium-ion batteries hold promise as future energy storage solution, yet current Mg cathodes are challenged by low voltage and specific capacity. Herein, we present an AI-driven workflow for discovering high-performance Mg cathode materials. Utilizing the common characteristics of various ionic intercalation-type electrodes, we design and train a Crystal Graph Convolutional Neural Network model that can accurately predicts electrode voltages for various ions with mean absolute errors (MAE) between 0.25 and 0.33 V. By deploying the trained model to stable Mg compounds from Materials Project and GNoME AI dataset, we identify 160 high voltage structures out of 15,308 candidates with voltages above 3.0 V and volumetric capacity over 800 Ah/L. We further train a precise NequIP model to facilitate accurate and rapid simulations of Mg ionic conductivity. From the 160 high voltage structures, the machine learning molecular dynamics simulations have selected 23 cathode materials with both high energy density and high ionic conductivity. This AI-driven workflow dramatically boosts the efficiency and precision of material discovery for multivalent ion batteries, paving the way for advanced Mg battery development.", - "arxiv_id": "2412.11032v1", - "categories": [ - "cond-mat.mtrl-sci" - ], - "primary_category": "cond-mat.mtrl-sci", - "published_date": "2024-12-15T03:02:33Z", - "updated_date": "2024-12-15T03:02:33Z", - "pdf_url": "https://arxiv.org/pdf/2412.11032v1", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2412.11032v1.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "How quickly can sodium-ion learn? Assessing scenarios for techno-economic competitiveness against lithium-ion batteries", - "authors": [ - "Adrian Yao", - "Sally M. Benson", - "William C. Chueh" - ], - "abstract": "Sodium-ion batteries have garnered significant attention as a potentially low-cost alternative to lithium-ion batteries, which have experienced supply shortages and pricing volatility of key minerals. Here we assess their techno-economic competitiveness against incumbent lithium-ion batteries using a modeling framework incorporating componential learning curves constrained by minerals prices and engineering design floors. We compare projected sodium-ion and lithium-ion price trends across over 6,000 scenarios while varying Na-ion technology development roadmaps, supply chain scenarios, market penetration, and learning rates. Assuming substantial progress can be made along technology roadmaps via targeted R&D, we identify many sodium-ion pathways that might reach cost-competitiveness with low-cost lithium-ion variants in the early 2030s. Additionally, we show timelines are highly sensitive to movements in critical minerals supply chains -- namely that of lithium, graphite, and nickel. Modeled outcomes suggest increasing sodium-ion energy densities to decrease materials intensity to be among the most impactful ways to improve competitiveness.", - "arxiv_id": "2403.13759v4", - "categories": [ - "physics.chem-ph", - "cond-mat.mtrl-sci" - ], - "primary_category": "physics.chem-ph", - "published_date": "2024-03-20T17:14:55Z", - "updated_date": "2024-12-12T23:16:34Z", - "pdf_url": "https://arxiv.org/pdf/2403.13759v4", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2403.13759v4.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "1D Kinetic Energy Density Functionals learned with Symbolic Regression", - "authors": [ - "Michael A. J. Mitchell", - "Teresa Del Aguila Ferrandis", - "Stefano Sanvito" - ], - "abstract": "Orbital-free density functional theory promises to deliver linear-scaling electronic structure calculations. This requires the knowledge of the non-interacting kinetic-energy density functional (KEDF), which should be accurate and must admit accurate functional derivatives, so that a minimization procedure can be designed. In this work, symbolic regression is explored as an alternative means to machine-learn the KEDF, which results into analytical expressions, whose functional derivatives are easy to compute. The so-determined semi-local functional forms are investigated as a function of the electron number, and we are able to track the transition from the von Weizs\\\"acker functional, exact for the one-electron case, to the Thomas-Fermi functional, exact in the homogeneous electron gas limit. A number of separate searches are performed, ranging from totally unconstrained to constrained in the form of an enhancement factor. This work highlights the complexity in constructing semi-local approximations of the KEDF and the potential of symbolic regression to advance the search.", - "arxiv_id": "2412.08143v1", - "categories": [ - "cond-mat.mtrl-sci" - ], - "primary_category": "cond-mat.mtrl-sci", - "published_date": "2024-12-11T07:02:38Z", - "updated_date": "2024-12-11T07:02:38Z", - "pdf_url": "https://arxiv.org/pdf/2412.08143v1", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2412.08143v1.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Quantum Energy Teleportation versus Information Teleportation", - "authors": [ - "Jinzhao Wang", - "Shunyu Yao" - ], - "abstract": "Quantum energy teleportation (QET) is the phenomenon in which locally inaccessible energy is activated as extractable work through collaborative local operations and classical communication (LOCC) with an entangled partner. It closely resembles the more well-known quantum information teleportation (QIT) where quantum information can be sent through an entangled pair with LOCC. It is tempting to ask how QET is related to QIT. Here we report a first study of this connection. Despite the apparent similarity, we show that these two phenomena are not only distinct but moreover are mutually competitive. We show a perturbative trade-off relation between their performance in a thermal entangled chaotic many-body system, in which both QET and QIT are simultaneously implemented through a traversable wormhole in an emergent spacetime. Motivated by this example, we study a generic setup of two entangled qudits and prove a universal non-perturbative trade-off bound. It shows that for any teleportation protocol, the overall performance of QET and QIT together is constrained by the entanglement resource. We discuss some explanations of our results.", - "arxiv_id": "2405.13886v2", - "categories": [ - "quant-ph", - "cond-mat.str-el", - "hep-th" - ], - "primary_category": "quant-ph", - "published_date": "2024-05-22T18:00:01Z", - "updated_date": "2024-12-11T02:13:46Z", - "pdf_url": "https://arxiv.org/pdf/2405.13886v2", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2405.13886v2.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Ionic structure, Liquid-liquid phase transitions, X-Ray diffraction, and X-Ray Thomson scattering in shock compressed liquid Silicon in the 100-200 GPa regime", - "authors": [ - "M. W. C. Dharma-wardana", - "Dennis D. Klug", - "Hannah Poole", - "G. Gregori" - ], - "abstract": "Recent cutting-edge experiments have provided {\\it in situ} structure characterization and measurements of the pressure ($P$), density ($\\bar{\\rho}$) and temperature ($T$) of shock compressed silicon in the 100 GPa range of pressures and upto $\\sim$10,000K. We present first-principles calculations in this $P,T,\\bar{\\rho}$ regime to reveal a plethora of novel liquid-liquid phase transitions (LPTs) identifiable via discontinuities in the pressure and the compressibility. Evidence for the presence of a highly-correlated liquid (CL) phase, as well as a normal-liquid (NL) phase at the LPTs is presented by a detailed study of one LPT. The LPTs make the interpretation of these experiments more challenging. The LPTs preserve the short-ranged ionic structure of the fluid by collective adjustments of many distant atoms when subject to compression and heating, with minimal change in the ion-ion pair-distribution functions, and in transport properties such as the electrical and thermal conductivities $\\sigma$ and $\\kappa$. We match the experimental X-Ray Thomson scattering and X-ray diffraction data theoretically, and provide pressure isotherms, ionization data and compressibilities that support the above picture of liquid silicon as a highly complex LPT-driven ``glassy'' metallic liquid. These novel results are relevant to materials research, studies of planetary interiors, high-energy-density physics, and in laser-fusion studies.", - "arxiv_id": "2408.04173v2", - "categories": [ - "cond-mat.mtrl-sci", - "physics.plasm-ph" - ], - "primary_category": "cond-mat.mtrl-sci", - "published_date": "2024-08-08T02:35:17Z", - "updated_date": "2024-12-10T19:31:03Z", - "pdf_url": "https://arxiv.org/pdf/2408.04173v2", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2408.04173v2.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Fast and stable tight-binding framework for nonlocal kinetic energy density functional reconstruction in orbital-free density functional calculations", - "authors": [ - "Yongshuo Chen", - "Cheng Ma", - "Boning Cui", - "Tian Cui", - "Wenhui Mi", - "Qiang Xu", - "Yanchao Wang", - "Yanming Ma" - ], - "abstract": "Nonlocal kinetic energy density functionals (KEDFs) with density-dependent kernels are currently the most accurate functionals available for orbital-free density functional theory (OF-DFT) calculations. However, despite advances in numerical techniques and using only (semi)local density-dependent kernels, nonlocal KEDFs still present substantial computational costs in OF-DFT, limiting their application in large-scale material simulations. To address this challenge, we propose an efficient framework for reconstructing nonlocal KEDFs by incorporating the density functional tight-binding approach, in which the energy functionals are simplified through a first-order functional expansion based on the superposition of free-atom electron densities. This strategy allows the computationally expensive nonlocal kinetic energy and potential calculations to be performed only once during the electron density optimization process, significantly reducing computational overhead while maintaining high accuracy. Benchmark tests using advanced nonlocal KEDFs, such as revHC and LDAK-MGPA, on standard structures including Li, Mg, Al, Ga, Si, III-V semiconductors, as well as Mg$_{50}$ and Si$_{50}$ clusters, demonstrate that our method achieves orders-of-magnitude improvements in efficiency, providing a cost-effective balance between accuracy and computational speed. Additionally, the reconstructed functionals exhibit improved numerical stability for both bulk and finite systems, paving the way for developing more sophisticated KEDFs for realistic material simulations using OF-DFT.", - "arxiv_id": "2412.02959v1", - "categories": [ - "cond-mat.mtrl-sci", - "cond-mat.mes-hall", - "physics.comp-ph" - ], - "primary_category": "cond-mat.mtrl-sci", - "published_date": "2024-12-04T02:10:21Z", - "updated_date": "2024-12-04T02:10:21Z", - "pdf_url": "https://arxiv.org/pdf/2412.02959v1", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2412.02959v1.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Double Layer-Interlocked Crystals of Nitrogen-Rich Compounds under Zero-Pressure Conditions", - "authors": [ - "Zhen Gong", - "Baiqiang Liu", - "Xinrui Yang", - "Hongbo Jing", - "Ruiqi Xu", - "Zhigang Wang" - ], - "abstract": "Stabilizing nitrogen-rich compound crystals under conventional conditions is a key issue in the development and application of high-energy density materials (HEDMs). Herein, a two-dimensional double-layer interlocked Li4(N5)2 nitrogen-rich compound crystals, in which the two N5 rings are locked to by sharing four Li atoms, was found to maintain structural stability at zero pressure conditions. Dynamics studies reliably confirm crystal stability below 250 K. Furthermore, the stability of Li4(N5)2 crystal mainly arises from the ionic interaction between Li atoms and N5 rings, formed by the charge transfer from Li atoms to N5 rings. This study highlights the feasibility of stabilizing nitrogen-rich compound crystals under conventional conditions, paving the way for atomic level advancements in HEDMs.", - "arxiv_id": "2412.01497v2", - "categories": [ - "cond-mat.mtrl-sci", - "cond-mat.soft", - "physics.comp-ph" - ], - "primary_category": "cond-mat.mtrl-sci", - "published_date": "2024-12-02T13:49:41Z", - "updated_date": "2024-12-03T05:46:39Z", - "pdf_url": "https://arxiv.org/pdf/2412.01497v2", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2412.01497v2.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Cutting Soft Matter: Scaling relations controlled by toughness, friction, and wear", - "authors": [ - "Bharath Antarvedi Goda", - "Zhenwei Ma", - "Stefano Fregonese", - "Mattia Bacca" - ], - "abstract": "Cutting mechanics of soft solids is gaining rapid attention thanks to its promising benefits in material characterization and other applications. However, a full understanding of the physical phenomena is still missing, and several questions remain outstanding. E.g.: How can we directly and reliably measure toughness from cutting experiments? What is the role of blade sharpness? In this paper, we explore the simple problem of wire cutting, where blade sharpness is only defined by the wire radius. Through finite element analysis, we obtain a simple scaling relation between the wire radius and the steady-state cutting force per unit sample thickness. The cutting force is independent of the wire radius if the latter is below a transition length, while larger radii produce a linear force-radius correlation. The minimum cutting force, for small radii, is given by cleavage toughness, i.e., the surface energy required to break covalent bonds in the crack plane. The force-radius slope is instead given by the wear shear strength in the material. Via cutting experiments on polyacrylamide gels, we find that the magnitude of shear strength is close to the work of fracture of the material, i.e., the critical strain energy density required to break a pristine sample in uniaxial tension. The work of fracture characterizes the toughening contribution from the fracture process zone (FPZ), which adds to cleavage toughness. Our study provides two important messages, that answer the above questions: Toughness can be estimated from wire-cutting experiments from the intercept of the force-radius linear correlation, as previously explored. However, as we discovered, this only estimates cleavage toughness. Additionally, the force-radius slope is correlated with the work of fracture, giving an estimation of the dissipative contributions from the FPZ.", - "arxiv_id": "2412.02021v1", - "categories": [ - "cond-mat.soft", - "cond-mat.mtrl-sci" - ], - "primary_category": "cond-mat.soft", - "published_date": "2024-12-02T22:49:27Z", - "updated_date": "2024-12-02T22:49:27Z", - "pdf_url": "https://arxiv.org/pdf/2412.02021v1", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2412.02021v1.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Powder Ball Milling: An energy balance approach to particle size reduction", - "authors": [ - "Stefano Martelli", - "Paolo Emilio Di Nunzio" - ], - "abstract": "Milling of brittle materials shows a lower limit in size reduction, below which grinding cannot proceed further. Experimentally, the smallest particle size is determined by the milling media energy, and it is time-independent. Rittinger's law, which applies to fine grinding, does not consider any lower limit in size, leading to nonphysical results. A damping factor gradually inhibiting grinding efficiency has already been suggested as a modification. Milling mechanics and changes in material properties at small sizes have been associated to this behavior. In this work, the grinding inhibition is linked to an energy balance between the powder's specific surface energy and the energy density, calculated as the kinetic energy of the milling media divided by the impacted volume. By introducing the idea of energy equilibrium, comminution behaves as a phase transformation characterized by a JMAK kinetics. Validation of this formulation has been conducted on published and original data.", - "arxiv_id": "2409.20202v2", - "categories": [ - "cond-mat.mtrl-sci" - ], - "primary_category": "cond-mat.mtrl-sci", - "published_date": "2024-09-30T11:29:24Z", - "updated_date": "2024-11-30T18:14:44Z", - "pdf_url": "https://arxiv.org/pdf/2409.20202v2", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2409.20202v2.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "A facile route to synthesize cubic gauche polymeric nitrogen", - "authors": [ - "Runteng Chen", - "Jun Zhang", - "Zelong Wang", - "Ke Lu", - "Yi Peng", - "Jianfa Zhao", - "Xiaodong Liu", - "Shaomin Feng", - "Ruibin Liu", - "Chuan Xiao", - "Changqing Jin" - ], - "abstract": "In this work, the long-sought cg-N with N-N single bond has been synthesized for the first time by a thermal-driven-only chemical route at ambient conditions. The successful synthesis of cg-N was achieved by first creating a solution of azides, which was then pretreated under vacuum conditions. Following the pretreatment, the resultant concentrated azide was heated at temperatures ranging from 260{\\deg}C to 330{\\deg}C for a reaction time of 3 hours, ultimately leading to the formation of cg-N. The emergent intense Raman peak characterized of cg-N provides solid evidence that the double bonded nitrogen-nitrogen transforms into a single bond form, which agrees well with cg-N structure. To date, this is the only work achieving the quantity of cg-N synthesized at ambient conditions by a facile route that can be further developed for the scalable synthesis and applications of polymerized nitrogen-based materials as high energy density materials.", - "arxiv_id": "2411.10331v3", - "categories": [ - "cond-mat.mtrl-sci", - "cond-mat.supr-con", - "physics.chem-ph" - ], - "primary_category": "cond-mat.mtrl-sci", - "published_date": "2024-11-15T16:30:46Z", - "updated_date": "2024-11-28T09:38:46Z", - "pdf_url": "https://arxiv.org/pdf/2411.10331v3", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2411.10331v3.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "The large $N$ vector model on $S^1\\times S^2$", - "authors": [ - "Justin R. David", - "Srijan Kumar" - ], - "abstract": "We develop a method to evaluate the partition function and energy density of a massive scalar on a 2-sphere of radius $r$ and at finite temperature $\\beta$ as power series in $\\frac{\\beta}{r}$. Each term in the power series can be written in terms of polylogarithms. We use this result to obtain the gap equation for the large $N$, critical $O(N)$ model with a quartic interaction on $S^1\\times S^2$ in the large radius expansion. Solving the gap equation perturbatively we obtain the leading finite size corrections to the expectation value of stress tensor for the $O(N)$ vector model on $S^1\\times S^2$. Applying the Euclidean inversion formula on the perturbative expansion of the thermal two point function we obtain the finite size corrections to the expectation value of the higher spin currents of the critical $O(N)$ model. Finally we show that these finite size corrections of higher spin currents tend to that of the free theory at large spin as seen earlier for the model on $S^1\\times R^2$.", - "arxiv_id": "2411.18509v1", - "categories": [ - "hep-th", - "cond-mat.stat-mech", - "cond-mat.str-el" - ], - "primary_category": "hep-th", - "published_date": "2024-11-27T16:52:54Z", - "updated_date": "2024-11-27T16:52:54Z", - "pdf_url": "https://arxiv.org/pdf/2411.18509v1", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2411.18509v1.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Magnetic resonance frequency of two-sublattice ferrimagnet with magnetic compensation temperature", - "authors": [ - "Kouki Mikuni", - "Toshiki Hiraoka", - "Takumi Kuramoto", - "Yasuhiro Fujii", - "Akitoshi Koreeda", - "Sergii Parchenko", - "Andrzej Stupakiewicz", - "Takuya Satoh" - ], - "abstract": "Ferrimagnetic materials with a compensation temperature have recently attracted interest because of their unique combination of ferromagnetic and antiferromagnetic properties. However, their magnetization dynamics near the compensation temperature are complex and cannot be fully explained by conventional ferromagnetic resonance (FMR) or exchange resonance modes. Therefore, practical models are necessary to capture these dynamics accurately. In this study, we derived the analytical solutions for the magnetic resonance frequencies of compensated ferrimagnets over all temperature ranges, considering both the in-plane and out-of-plane orientations of the magnetization. Our solutions successfully reproduce the experimental data obtained from time-resolved magneto-optical Faraday rotation and Brillouin light scattering measurements for the in-plane and out-of-plane cases, respectively. This reproduction is achieved by incorporating the exchange stiffness and temperature dependence of the magnetic anisotropy into the free energy density. Additionally, at temperatures sufficiently far from the compensation temperature, our analytical solutions converge with the conventional FMR and exchange resonance models.", - "arxiv_id": "2411.14792v1", - "categories": [ - "cond-mat.mtrl-sci" - ], - "primary_category": "cond-mat.mtrl-sci", - "published_date": "2024-11-22T08:29:09Z", - "updated_date": "2024-11-22T08:29:09Z", - "pdf_url": "https://arxiv.org/pdf/2411.14792v1", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2411.14792v1.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Prethermalization in aperiodically driven classical spin systems", - "authors": [ - "Sajag Kumar", - "Sayan Choudhury" - ], - "abstract": "Periodically driven classical many-body systems can host a rich zoo of prethermal dynamical phases. In this work, we extend the paradigm of classical prethermalization to aperiodically driven systems. We establish the existence of a long-lived prethermal regime in spin systems subjected to random multipolar drives (RMDs). We demonstrate that the thermalization time scales as $(1/T)^{2n+2}$, where $n$ is the multipolar order and $T$ is the intrinsic time-scale associated with the drive. In the $n \\rightarrow \\infty$ limit, the drive becomes quasi-periodic and the thermalization time becomes exponentially long ($\\sim \\exp(\\beta/T)$). We further establish the robustness of prethermalization by demonstrating that these thermalization time scaling laws hold for a wide range of initial state energy densities. Intriguingly, the thermalization process in these classical systems is parametrically slower than their quantum counterparts, thereby highlighting important differences between classical and quantum prethermalization. Finally, we propose a protocol to harness this classical prethermalization to realize time rondeau crystals.", - "arxiv_id": "2404.10224v2", - "categories": [ - "quant-ph", - "cond-mat.dis-nn", - "cond-mat.stat-mech", - "cond-mat.str-el", - "nlin.CD" - ], - "primary_category": "quant-ph", - "published_date": "2024-04-16T02:09:12Z", - "updated_date": "2024-11-21T06:21:43Z", - "pdf_url": "https://arxiv.org/pdf/2404.10224v2", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2404.10224v2.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Real-Time Scattering in Ising Field Theory using Matrix Product States", - "authors": [ - "Raghav G. Jha", - "Ashley Milsted", - "Dominik Neuenfeld", - "John Preskill", - "Pedro Vieira" - ], - "abstract": "We study scattering in Ising Field Theory (IFT) using matrix product states and the time-dependent variational principle. IFT is a one-parameter family of strongly coupled non-integrable quantum field theories in 1+1 dimensions, interpolating between massive free fermion theory and Zamolodchikov's integrable massive $E_8$ theory. Particles in IFT may scatter either elastically or inelastically. In the post-collision wavefunction, particle tracks from all final-state channels occur in superposition; processes of interest can be isolated by projecting the wavefunction onto definite particle sectors, or by evaluating energy density correlation functions. Using numerical simulations we determine the time delay of elastic scattering and the probability of inelastic particle production as a function of collision energy. We also study the mass and width of the lightest resonance near the $E_8$ point in detail. Close to both the free fermion and $E_8$ theories, our results for both elastic and inelastic scattering are in good agreement with expectations from form-factor perturbation theory. Using numerical computations to go beyond the regime accessible by perturbation theory, we find that the high energy behavior of the two-to-two particle scattering probability in IFT is consistent with a conjecture of Zamolodchikov. Our results demonstrate the efficacy of tensor-network methods for simulating the real-time dynamics of strongly coupled quantum field theories in 1+1 dimensions.", - "arxiv_id": "2411.13645v1", - "categories": [ - "hep-th", - "cond-mat.str-el", - "hep-lat", - "quant-ph" - ], - "primary_category": "hep-th", - "published_date": "2024-11-20T19:00:01Z", - "updated_date": "2024-11-20T19:00:01Z", - "pdf_url": "https://arxiv.org/pdf/2411.13645v1", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2411.13645v1.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Breaking the wire: the impact of critical length on melting pathways in silver nanowires", - "authors": [ - "Kannan M Ridings", - "Eneasi E L Vaka'uta", - "Sam M Croot" - ], - "abstract": "We explore the melting mechanisms of silver nanowires through molecular dynamics simulations and theoretical modelling, where we observe that two distinct mechanisms or pathways emerge that dictate how the solid-liquid interface melts during the phase transition. For wires longer than a critical length ($L>L_{\\textrm{crit}}$), an Arrhenius-type diffusion model successfully predicts the solid-liquid interface velocity, highlighting diffusion-driven melting pathways. In contrast, wires shorter than the critical length ($L\\leq L_{\\textrm{crit}}$) exhibit unique behaviours driven by non-equilibrium effects, including rapid overheating of the solid core, stabilization of the solid-liquid interface, and the pronounced impact of higher energy densities. These mechanisms lead to accelerated melting and distinct phase transition dynamics. Our findings reveal how geometry and nanoscale effects critically shape melting behaviour, offering insights for the design and stability of nanostructures in advanced applications.", - "arxiv_id": "2411.12891v1", - "categories": [ - "cond-mat.mes-hall", - "cond-mat.mtrl-sci" - ], - "primary_category": "cond-mat.mes-hall", - "published_date": "2024-11-19T22:14:03Z", - "updated_date": "2024-11-19T22:14:03Z", - "pdf_url": "https://arxiv.org/pdf/2411.12891v1", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2411.12891v1.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Grain Selection Growth of Soft Metal in Electrochemical Processes", - "authors": [ - "Minghao Zhang", - "Karnpiwat Tantratian", - "So-Yeon Ham", - "Zhuo Wang", - "Mehdi Chouchane", - "Ryosuke Shimizu", - "Shuang Bai", - "Hedi Yang", - "Zhao Liu", - "Letian Li", - "Amir Avishai", - "Lei Chen", - "Ying Shirley Meng" - ], - "abstract": "Soft metals like lithium and sodium play a critical role in battery technology owing to their high energy density. Texture formation by grain selection growth of soft metals during electrochemical processes is a crucial factor affecting power and safety. Developing a framework to understand and control grain growth is a multifaceted challenge. Here, a general thermodynamic theory and phase-field model are formulated to study grain selection growth of soft metals. Our study focuses on the interplay between surface energy and atomic mobility-related intrinsic strain energy in grain selection growth. Differences in grain selection growth arise from the anisotropy in surface energy and diffusion barrier of soft metal atoms. Our findings highlight the kinetic limitations of solid-state Li metal batteries, which originate from load stress-induced surface energy anisotropy. These insights lead to the development of an amorphous LixSi1-x (0.50 50 ps over a narrow average density (p_av) range spanning the expected phonon-fracton crossover in aerogels. Numerical modelling suggests that this discontinuity can be understood by a quenching of rapid, phonon-assisted recovery in irradiated nanostructured SiO_2. This is shown to lead to an extended period of enhanced energy density in the excited electron population. Overall, these results open a direct route to tracking how low-level processes in complex systems can underpin macroscopically observed phenomena and, importantly, the conditions that permit them to emerge.", - "arxiv_id": "2409.08689v1", - "categories": [ - "physics.acc-ph", - "cond-mat.mtrl-sci", - "physics.plasm-ph" - ], - "primary_category": "physics.acc-ph", - "published_date": "2024-09-13T10:17:34Z", - "updated_date": "2024-09-13T10:17:34Z", - "pdf_url": "https://arxiv.org/pdf/2409.08689v1", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2409.08689v1.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Learning local and semi-local density functionals from exact exchange-correlation potentials and energies", - "authors": [ - "Bikash Kanungo", - "Jeffrey Hatch", - "Paul M. Zimmerman", - "Vikram Gavini" - ], - "abstract": "Finding accurate exchange-correlation (XC) functionals remains the defining challenge in density functional theory (DFT). Despite 40 years of active development, the desired chemical accuracy is still elusive with existing functionals. We present a data-driven pathway to learn the XC functionals by utilizing the exact density, XC energy, and XC potential. While the exact densities are obtained from accurate configuration interaction (CI), the exact XC energies and XC potentials are obtained via inverse DFT calculations on the CI densities. We demonstrate how simple neural network (NN) based local density approximation (LDA) and generalized gradient approximation (GGA), trained on just five atoms and two molecules, provide remarkable improvement in total energies, densities, atomization energies, and barrier heights for hundreds of molecules outside the training set. Particularly, the NN-based GGA functional attains similar accuracy as the higher rung SCAN meta-GGA, highlighting the promise of using the XC potential in modeling XC functionals. We expect this approach to pave the way for systematic learning of increasingly accurate and sophisticated XC functionals.", - "arxiv_id": "2409.06498v1", - "categories": [ - "physics.chem-ph", - "cond-mat.mtrl-sci", - "cs.LG", - "physics.comp-ph" - ], - "primary_category": "physics.chem-ph", - "published_date": "2024-09-10T13:26:37Z", - "updated_date": "2024-09-10T13:26:37Z", - "pdf_url": "https://arxiv.org/pdf/2409.06498v1", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2409.06498v1.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Flexible Trilayer Cellulosic Paper Separators engineered with BaTiO$_3$ ferroelectric fillers for High Energy Density Sodium-ion Batteries", - "authors": [ - "Simranjot K. Sapra", - "Mononita Das", - "M. Wasim Raja", - "Jeng-Kuei Chang", - "Rajendra S. Dhaka" - ], - "abstract": "We design a full cell configuration having Na$_{3}$V$_{2}$(PO$_{4}$)$_{3}$ as cathode and pre-sodiated hard carbon as an anode with Cellulosic Paper Separators and compare the electrochemical performance of these ceramic-impregnated polymer-coated cellulose paper separators with commercial glass fiber separator. Notably, the paper-based multilayer separators provide desirable characteristics such as excellent electrolyte wettability, thermal stability up to 200\\degree C, and ionic conductivity, which are essential for the efficient operation of SIBs. The cellulose separator is coated by a layer of polyvinylidene fluoride polymer, followed by a second layer of styrene butadiene rubber (SBR) polymer in which ferroelectric fillers BaTiO$_{3}$ are integrated, which interacts with the polymer hosts through Lewis acid-base interactions ion and improves the conduction mechanism for the Na$^{+}$ ions. The final lamination is performed by varying the SBR concentrations (0.5, 0.75, and 1.0 w/v\\%). The incorporated polymer matrices improve the flexibility, adhesion and dispersion of the nanoparticles and affinity of the electrolyte to the electrode. The morphology of the paper separators shows the uniform interconnected fibers with the porous structure. Interestingly, we find that the paper separator with 0.75 w/v\\% content of SBR exhibit decreased interfacial resistance and improved electrochemical performance, having retention of 62\\% and nearly 100\\% Coulombic efficiency up to 240 cycles, as compared to other concentrations. Moreover, we observe the energy density around 376 Wh kg$^{-1}$ (considering cathode weight), which found to be comparable to the commercially available glass fiber separator. Our results demonstrate the potential of these multilayer paper separators towards achieving sustainability and safety in energy storage systems.", - "arxiv_id": "2409.06743v1", - "categories": [ - "cond-mat.mtrl-sci", - "physics.app-ph", - "physics.chem-ph" - ], - "primary_category": "cond-mat.mtrl-sci", - "published_date": "2024-09-10T06:40:58Z", - "updated_date": "2024-09-10T06:40:58Z", - "pdf_url": "https://arxiv.org/pdf/2409.06743v1", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2409.06743v1.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Mathematical foundations of phonons in incommensurate materials", - "authors": [ - "Michael Hott", - "Alexander B. Watson", - "Mitchell Luskin" - ], - "abstract": "In some models, periodic configurations can be shown to be stable under, both, global $\\ell^2$ or local perturbations. This is not the case for aperiodic media. The specific class of aperiodic media we are interested, in arise from taking two 2D periodic crystals and stacking them parallel at a relative twist. In periodic media, phonons are generalized eigenvectors for a stability operator acting on $\\ell^2$, coming from a mechanical energy. The goal of our analysis is to provide phonons in the given class of aperiodic media with meaning. As rigorously established for the 1D Frenkel-Kontorova model and previously applied by one of the authors, we assume that we can parametrize minimizing lattice deformations w.r.t. local perturbations via continuous stacking-periodic functions, for which we previously derived a continuous energy density functional. Such (continuous) energy densities are analytically and computationally much better accessible compared to discrete energy functionals. In order to pass to an $\\ell^2$-based energy functional, we also study the offset energy w.r.t. given lattice deformations, under $\\ell^1$-perturbations. Our findings show that, in the case of an undeformed bilayer heterostructure, while the energy density can be shown to be stable under the assumption of stability of individual layers, the offset energy fails to be stable in the case of twisted bilayer graphene. We then establish conditions for stability and instability of the offset energy w.r.t. the relaxed lattice. Finally, we show that, in the case of incommensurate bilayer homostructures, i.e., two equal layers, if we choose minimizing deformations according to the global energy density above, the offset energy is stable in the limit of zero twist angle. Consequently, in this case, one can then define phonons as generalized eigenvectors w.r.t. the stability operator associated with the offset energy.", - "arxiv_id": "2409.06151v1", - "categories": [ - "math-ph", - "cond-mat.mes-hall", - "cond-mat.mtrl-sci", - "cond-mat.str-el", - "math.AP", - "math.MP", - "74H45, 74B20, 35Q74, 35B25" - ], - "primary_category": "math-ph", - "published_date": "2024-09-10T01:53:17Z", - "updated_date": "2024-09-10T01:53:17Z", - "pdf_url": "https://arxiv.org/pdf/2409.06151v1", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2409.06151v1.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Effects of Interfacial Oxygen Diffusion on the Magnetic Properties and Thermal Stability of Pd/CoFeB/Pd/Ta Heterostructure", - "authors": [ - "Saravanan Lakshmanan", - "Cristian Romanque", - "Mario Mery", - "Manivel Raja Muthuvel", - "Nanhe Kumar Gupta", - "Carlos Garcia" - ], - "abstract": "We investigated the effects of annealing temperatures (TA) on a Pd (5 nm)/CoFeB (10 nm)/Pd (3 nm)/Ta (10 nm) multilayer structure. The as-deposited sample showed an amorphous state with in-plane uniaxial magnetic anisotropy (UMA), resulting in low coercivity and moderate damping constant ({\\alpha}) values. Increasing TA led to crystallization, forming bcc-CoFe (110) crystals, which increased in-plane coercivity and introduced isotropic magnetic anisotropy, slightly reducing the {\\alpha}. The two-fold UMA persists up to 600 C, and the thermal stability of the in-plane magnetic anisotropy remains intact even TA = 700 C. The TA significantly influenced the magnetic properties such as in-plane saturation magnetization (Ms//), in-plane and out-of-plane coercivities, and in-plane effective magnetic anisotropy energy density (Keff). Above 600 C, Keff decreased, indicating a transition towards uniaxial perpendicular magnetic anisotropy. Interfacial oxidation and diffusion from the Ta capping layer to the Pd/CoFeB/Pd interfaces were observed, influencing chemical bonding states. Annealing at 700 C, reduced oxygen within TaOx through a redox reaction involving Ta crystallization, forming TaB, PdO, and BOx states. Ferromagnetic resonance spectra analysis indicated variations in resonance field (Hr) due to local chemical environments. The {\\alpha} reduction, reaching a minimum at 300 C annealing, was attributed to reduced structural disorder from inhomogeneities. Tailoring magnetic anisotropy and spin dynamic properties in Pd/CoFeB/Pd/Ta structures through TA-controlled oxygen diffusion/oxidation highlights their potential for SOT, DMI, and magnetic skyrmion-based spintronic devices.", - "arxiv_id": "2409.05783v1", - "categories": [ - "cond-mat.mtrl-sci", - "physics.app-ph" - ], - "primary_category": "cond-mat.mtrl-sci", - "published_date": "2024-09-09T16:46:01Z", - "updated_date": "2024-09-09T16:46:01Z", - "pdf_url": "https://arxiv.org/pdf/2409.05783v1", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2409.05783v1.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Tuning the thermal conductivity of Si membrane using nanopillars: from crystalline to amorphous pillars", - "authors": [ - "Lina Yang", - "Yixin Xu", - "Xianheng Wang", - "Yanguang Zhou" - ], - "abstract": "Tuning thermal transport in nanostructures is essential for many applications, such as thermal management and thermoelectrics. Nanophononic metamaterials (NPM) have shown great potential for reducing thermal conductivity by introducing local resonant hybridization. In this work, the thermal conductivity of NPM with crystalline Si (c-Si) pillar, crystalline Ge (c-Ge) pillar and amorphous Si (a-Si) pillar are systematically investigated by molecular dynamics method. The analyses of phonon dispersion and spectral energy density show that phonon dispersions of Si membrane are flattened due to local resonant hybridization induced by both crystalline and amorphous pillar. In addition, a-Si pillar can cause larger reduction of thermal conductivity compared with c-Si pillar. Specifically, when increasing the atomic mass of atoms in pillars, the thermal conductivity of NPMs with crystalline pillar is increased because of the weakened phonon hybridization, however, the thermal conductivity of NPMs with amorphous pillar is almost unchanged, which indicates that the phonon transports are mainly affected by the scatterings at the interface between amorphous pillar and Si membrane. The results of this work can provide meaningful insights on controlling thermal transport in NPMs by choosing the materials and atomic mass of pillars for specific applications.", - "arxiv_id": "2404.09148v2", - "categories": [ - "cond-mat.mtrl-sci" - ], - "primary_category": "cond-mat.mtrl-sci", - "published_date": "2024-04-14T05:38:22Z", - "updated_date": "2024-09-09T05:04:53Z", - "pdf_url": "https://arxiv.org/pdf/2404.09148v2", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2404.09148v2.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Lattice thermal conductivity and phonon properties of polycrystalline graphene", - "authors": [ - "Kunwar Abhikeern", - "Amit Singh" - ], - "abstract": "Using spectral energy density method, we predict the phonon scattering mean lifetimes of polycrystalline graphene (PC-G) having polycrystallinity only along $\\rm{x}$-axis with seven different misorientation (tilt) angles at room temperature. Contrary to other studies on PC-G samples, our results indicate strong dependence of the thermal conductivity (TC) on the tilt angles. We also show that the square of the group velocity components along $\\rm{x}$ and $\\rm{y}$ axes and the phonon lifetimes are uncorrelated and the phonon density of states are almost the same for all samples with different tilt angles. Further, a distribution of the group velocity component along $\\rm{x}$ or $\\rm{y}$ axis as function of normal frequency is found to be exponentially decaying whereas that of phonon lifetime showed piecewise constant function behavior with respect to frequency. We provide parameters for these distribution functions and suggest another measure of the TC based on these distributions. Finally, we perform a size-dependent analysis for two tilt angles, $21.78^\\circ$ and $32.20^\\circ$, and find that bulk TC components decrease by around 34% to 62% in comparison to the bulk TC values of the pristine graphene. Our analysis reveals intriguing insights into the interplay between grain orientation, phonon scattering and thermal conductivity in graphene.", - "arxiv_id": "2409.04503v1", - "categories": [ - "cond-mat.mtrl-sci", - "cond-mat.mes-hall" - ], - "primary_category": "cond-mat.mtrl-sci", - "published_date": "2024-09-06T16:06:22Z", - "updated_date": "2024-09-06T16:06:22Z", - "pdf_url": "https://arxiv.org/pdf/2409.04503v1", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2409.04503v1.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Improving Electrolyte Performance for Target Cathode Loading Using Interpretable Data-Driven Approach", - "authors": [ - "Vidushi Sharma", - "Andy Tek", - "Khanh Nguyen", - "Max Giammona", - "Murtaza Zohair", - "Linda Sundberg", - "Young-Hye La" - ], - "abstract": "Higher loading of active electrode materials is desired in batteries, especially those based on conversion reactions, for enhanced energy density and cost efficiency. However, increasing active material loading in electrodes can cause significant performance depreciation due to internal resistance, shuttling, and parasitic side reactions, which can be alleviated to a certain extent by a compatible design of electrolytes. In this work, a data-driven approach is leveraged to find a high-performing electrolyte formulation for a novel interhalogen battery custom to the target cathode loading. An electrolyte design consisting of 4 solvents and 4 salts is experimentally devised for a novel interhalogen battery based on a multi-electron redox reaction. The experimental dataset with variable electrolyte compositions and active cathode loading, is used to train a graph-based deep learning model mapping changing variables in the battery's material design to its specific capacity. The trained model is used to further optimize the electrolyte formulation compositions for enhancing the battery capacity at a target cathode loading by a two-fold approach: large-scale screening and interpreting electrolyte design principles for different cathode loadings. The data-driven approach is demonstrated to bring about an additional 20% increment in the specific capacity of the battery over capacities obtained from the experimental optimization.", - "arxiv_id": "2409.01989v1", - "categories": [ - "cs.LG", - "cond-mat.dis-nn", - "cond-mat.mtrl-sci" - ], - "primary_category": "cs.LG", - "published_date": "2024-09-03T15:33:25Z", - "updated_date": "2024-09-03T15:33:25Z", - "pdf_url": "https://arxiv.org/pdf/2409.01989v1", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2409.01989v1.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Meron-mediated phase transitions in quasi-two-dimensional chiral magnets with easy-plane anisotropy: successive transformation of the hexagonal skyrmion lattice into the square lattice and into the tilted FM state", - "authors": [ - "Andrey O. Leonov" - ], - "abstract": "I revisit the well-known structural transition between hexagonal and square skyrmion lattices induced by increasing easy-plane anisotropy in quasi-two-dimensional chiral magnets. I show that the hexagonal skyrmion order, by the first-order phase transition, transforms into a distorted (rhombic) skyrmion lattice. The transition is mediated by merons and anti-merons emerging within the boundaries between skyrmion cells. Since the energy density associated with anti-merons is highly positive owing to the wrong rotational sense, one anti-meron per unit cell annihilates: anti-merons are squeezed by the pairs of approaching merons at the opposite sides of the hexagonal unit cell. Further, in a narrow range of anisotropy values, the distorted skyrmion lattice gradually transforms into a perfect square order of skyrmions (alternatively called \"a square meron-antimeron crystal\") when two merons eventually merge into one. Thus, within the square skyrmion lattice, there is one meron and two anti-merons per unit cell, which underlie the subsequent first-order phase transition into the tilted ferromagnetic state. A pair of oppositely charged merons mutually annihilates, whereas a remaining anti-meron couples with an anti-meron occupying the center of the unit cell. As an outcome, the tilted ferromagnetic state contains bimeron clusters (chains) with the attracting inter-soliton potential. Moreover, domain-wall merons are actively involved in dynamic responses of the square skyrmion lattices. As an example, I theoretically study spin-wave modes and their excitations by ac magnetic fields. Two found resonance peaks are the result of the complex dynamics of domain-wall merons: whereas in the high-frequency mode, merons rotate counterclockwise as one might expect, in the low-frequency mode, merons are created and annihilated consistently with the rotational motion of the domain boundaries.", - "arxiv_id": "2409.01528v1", - "categories": [ - "cond-mat.mes-hall", - "cond-mat.str-el" - ], - "primary_category": "cond-mat.mes-hall", - "published_date": "2024-09-03T01:52:15Z", - "updated_date": "2024-09-03T01:52:15Z", - "pdf_url": "https://arxiv.org/pdf/2409.01528v1", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2409.01528v1.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "5-D thermal field theory, Einstein field equations and spontaneous symmetry breaking", - "authors": [ - "S. Ganesh" - ], - "abstract": "It has been shown previously, that the spatial thermal variation of a thermal medium can be recast as a variation in the Euclidean metric. It is now extended to temporal variations in temperature, for a non-relativistic thermal bath, which remains in local thermal equilibrium. This is achieved by examining the thermal field theory in a five-dimensional space-time-temperature. The bulk thermodynamic quantity, namely the energy density, is calculated for a neutral scalar field with a time-dependent Hamiltonian. Furthermore, the concept of recasting thermal variations as a variation in the metric is extended to thermal systems in a gravitational field. The Einstein field equations, in the 5-D space-time-temperature, is determined. It is shown that the resulting Ricci scalar can lead to spontaneous symmetry breaking, leading to the Higgs mechanism. In essence, the asymmetry in the distribution of temperature in space-time can translate to spontaneous symmetry breaking of particle fields, in a very strong gravitational field.", - "arxiv_id": "2301.04827v2", - "categories": [ - "hep-th", - "cond-mat.other", - "gr-qc", - "hep-ph", - "math-ph", - "math.MP" - ], - "primary_category": "hep-th", - "published_date": "2023-01-12T06:09:02Z", - "updated_date": "2024-08-30T04:41:56Z", - "pdf_url": "https://arxiv.org/pdf/2301.04827v2", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2301.04827v2.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Impact of Annealing on Perpendicular Magnetic Anisotropy in W/MgAl2O4/CoFeMnSi/W/CoFeMnSi/MgAl2O4/W. Double Storage Layers for Upcoming MTJs", - "authors": [ - "L. Saravanan", - "Nanhe Kumar Gupta", - "Vireshwar Mishra", - "Sujeet Chaudhary", - "Carlos Garcia" - ], - "abstract": "In this study, we achieved the improvement of uniaxial perpendicular magnetic anisotropy (PMA) in the W/MgAl2O4/CoFeMnSi/W/CoFeMnSi/MgAl2O4/W heterostructure by manipulating the annealing temperature (TA) [350 C, 450 C, and 550 C]. We observed a maximum effective PMA energy density (Keff) of = 1.604 x 106 erg/cc with low saturation magnetization (Ms) at the specified TA. The enhancement of Keff with Ms is significantly influenced by structural variations at the interfaces of CoFeMnSi and MgAl2O4, attributed to sufficient interfacial oxidation dependent on the TA. The TA was identified as a critical factor affecting the surface morphology, grain size, and surface roughness of the multilayer. Fourier-transform infrared (FT-IR) measurements were employed to confirm the presence of Co-O or Fe-O bond in the multilayer structures, elucidating the true origin of PMA. The control of interfacial oxidation at the interface during annealing is crucial for regulating the strength of PMA. Therefore, this double CoFeMnSi/MgAl2O4-based multilayer presents a promising avenue, serving as a favorable candidate for future p-MTJs-based spintronic devices with enhanced thermal stability.", - "arxiv_id": "2408.13676v1", - "categories": [ - "cond-mat.mtrl-sci" - ], - "primary_category": "cond-mat.mtrl-sci", - "published_date": "2024-08-24T21:44:27Z", - "updated_date": "2024-08-24T21:44:27Z", - "pdf_url": "https://arxiv.org/pdf/2408.13676v1", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2408.13676v1.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "High-areal-capacity Na-ion battery electrode with uncompromised energy and power densities by simultaneous electrospinning-spraying fabrication", - "authors": [ - "Mengzheng Ouyang", - "Zhenyu Guo", - "Luis E Salinas-Farran", - "Yan Zhao", - "Siyu Zhao", - "Kaitian Zheng", - "Hao Zhang", - "Mengnan Wang", - "Guangdong Li", - "Feiran Li", - "Xinhua Liu", - "Shichun Yang", - "Fei Xie", - "Paul R. Shearing", - "Maria-Magdalena Titirici", - "Nigel P. Brandon" - ], - "abstract": "Sodium-ion batteries (SIBs) are cost-effective alternatives to lithium-ion batteries (LIBs), but their low energy density remains a challenge. Current electrode designs fail to simultaneously achieve high areal loading, high active content, and superior performance. In response, this work introduces an ideal electrode structure, featuring a continuous conductive network with active particles securely trapped in the absence of binder, fabricated using a universal technique that combines electrospinning and electrospraying (co-ESP). We found that the particle size must be larger than the network's pores for optimised performance, an aspect overlooked in previous research. The free-standing co-ESP Na2V3(PO4)3 (NVP) cathodes demonstrated state-of-the-art 296 mg cm-2 areal loading with 97.5 wt.% active content, as well as remarkable rate-performance and cycling stability. Co-ESP full cells showed uncompromised energy and power densities (231.6 Wh kg-1 and 7152.6 W kg-1), leading among reported SIBs with industry-relevant areal loadings. The structural merit is analysed using multi-scale X-ray computed tomography, providing valuable design insights.Finally, the superior performance is validated in the pouch cells, highlighting the electrode's scalability and potential for commercial application.", - "arxiv_id": "2408.11655v1", - "categories": [ - "cond-mat.mtrl-sci" - ], - "primary_category": "cond-mat.mtrl-sci", - "published_date": "2024-08-21T14:26:27Z", - "updated_date": "2024-08-21T14:26:27Z", - "pdf_url": "https://arxiv.org/pdf/2408.11655v1", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2408.11655v1.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Exactly Solvable Floquet Dynamics for Conformal Field Theories in Dimensions Greater than Two", - "authors": [ - "Diptarka Das", - "Sumit R. Das", - "Arnab Kundu", - "Krishnendu Sengupta" - ], - "abstract": "We find classes of driven conformal field theories (CFT) in d + 1 dimensions with d > 1, whose quench and Floquet dynamics can be computed exactly. The setup is suitable for studying periodic drives, consisting of square pulse protocols for which Hamiltonian evolution takes place with different deformations of the original CFT Hamiltonian in successive time intervals. These deformations are realized by specific combinations of conformal generators with a deformation parameter $\\beta$; the $\\beta < 1$ ($\\beta > 1$) Hamiltonians can be unitarily related to the standard (Luscher-Mack) CFT Hamiltonian. The resulting time evolution can be then calculated by conformal transformations. For $d\\leq 3$ we show that the transformations can be obtained in a quaternion formalism. Evolution with such a single Hamiltonian yields qualitatively different time dependences of observables depending on the value of $\\beta$, ranging from exponential decays characteristic of heating to oscillations and power law decays. This manifests in the behavior of the fidelity, unequal-time correlator, and the energy density at the end of a single cycle of a square pulse protocol with different hamiltonians in successive time intervals. When the Hamiltonians in a cycle involve generators of a single SU(1, 1) subalgebra we calculate the Floquet Hamiltonian. We show that one can get dynamical phase transitions by varying the time period of a cycle, where the system can go from a non-heating phase which is oscillatory as a function of the time period to a heating phase with an exponentially damped behavior. Our methods can be generalized to other discrete and continuous protocols. We also point out that our results are expected to hold for a broader class of QFTs that possesses an SL(2, C) symmetry with fields that transform as quasi-primaries under this. As an example, we briefly comment on celestial CFTs in this context.", - "arxiv_id": "2311.13468v3", - "categories": [ - "hep-th", - "cond-mat.stat-mech", - "cond-mat.str-el" - ], - "primary_category": "hep-th", - "published_date": "2023-11-22T15:34:09Z", - "updated_date": "2024-08-21T03:31:33Z", - "pdf_url": "https://arxiv.org/pdf/2311.13468v3", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2311.13468v3.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Surface Tension of a Topological Phase", - "authors": [ - "Saikat Mondal", - "Adhip Agarwala" - ], - "abstract": "Metastable phases, in general, are unstable to nucleating droplets of the order defining the global free energy minima. However, whether such a droplet grows or shrinks relies on a competition between the surface tension and bulk energy density. We study the role of coupling a topological fermionic field to a scalar field undergoing such nucleation processes. We find that existence of non-trivial fermionic boundary modes on the nucleating droplets leads to substantial quantum corrections to the surface tension thereby modifying the size of the critical nucleus beyond which unrestricted droplet growth happens. To illustrate the phenomena we devise a minimal model of fermions in a Chern insulating system coupled to a classical Ising field in two spatial dimensions. Using a combination of analytic and numerical methods we conclusively show that topological phases can lead to characteristic quantum surface tension. Apart from material systems, our work has implications on the interplay of physics of statistical classical fields and quantum topological order.", - "arxiv_id": "2408.11102v1", - "categories": [ - "cond-mat.stat-mech", - "cond-mat.soft", - "cond-mat.str-el" - ], - "primary_category": "cond-mat.stat-mech", - "published_date": "2024-08-20T18:00:10Z", - "updated_date": "2024-08-20T18:00:10Z", - "pdf_url": "https://arxiv.org/pdf/2408.11102v1", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2408.11102v1.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Quantum statistical mechanics of the Sachdev-Ye-Kitaev model and charged black holes", - "authors": [ - "Subir Sachdev" - ], - "abstract": "This review is a contribution to a book dedicated to the memory of Michael E. Fisher. The first example of a quantum many body system not expected to have any quasiparticle excitations was the Wilson-Fisher conformal field theory. The absence of quasiparticles can be established in the compressible, metallic state of the Sachdev-Ye-Kitaev model of fermions with random interactions. The solvability of the latter model has enabled numerous computations of the non-quasiparticle dynamics of chaotic many-body states, such as those expected to describe quantum black holes. We review thermodynamic properties of the SYK model, and describe how they have led to an understanding of the universal structure of the low energy density of states of charged black holes without low energy supersymmetry.", - "arxiv_id": "2304.13744v5", - "categories": [ - "cond-mat.str-el", - "gr-qc", - "hep-th", - "quant-ph" - ], - "primary_category": "cond-mat.str-el", - "published_date": "2023-04-26T18:00:00Z", - "updated_date": "2024-08-19T18:55:33Z", - "pdf_url": "https://arxiv.org/pdf/2304.13744v5", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2304.13744v5.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Controlling moving interfaces in solid state batteries", - "authors": [ - "Salem Mosleh", - "Emil Annevelink", - "Venkatasubramanian Viswanathan", - "L. Mahadevan" - ], - "abstract": "Safe, all-solid-state lithium metal batteries enable high energy density applications, but suffer from instabilities during operation that lead to rough interfaces between the metal and electrolyte and subsequently cause void formation and dendrite growth that degrades performance and safety. Inspired by the morphogenetic control of thin lamina such as tree leaves that robustly grow into flat shapes -- we propose a range of approaches to control lithium metal stripping and plating. To guide discovery of materials that will implement these feedback mechanisms, we develop a reduced order model that captures couplings between mechanics, interface growth, temperature, and electrochemical variables. We find that long-range feedback is required to achieve true interface stability, while approaches based on local feedback always eventually grow into rough interfaces. All together, our study provides the beginning of a practical framework for analyzing and designing stable electrochemical interfaces in terms of the mechanical properties and the physical chemistry that underlie their dynamics.", - "arxiv_id": "2408.03175v1", - "categories": [ - "cond-mat.mtrl-sci", - "cond-mat.soft", - "q-bio.TO" - ], - "primary_category": "cond-mat.mtrl-sci", - "published_date": "2024-08-06T13:17:08Z", - "updated_date": "2024-08-06T13:17:08Z", - "pdf_url": "https://arxiv.org/pdf/2408.03175v1", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2408.03175v1.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Improved interfacial resistance and crystal-structure stability in a low-cobalt P2-type sodium-ion battery cathode material", - "authors": [ - "William Rexhausen", - "Christian Parsons", - "Uma Garg", - "Deyang Qu", - "Prasenjit Guptasarma" - ], - "abstract": "We describe Na0.67Mn0.625Fe0.25Co0.125O2 (NMFCO), a P2-type sodium-ion battery cathode. Our composition, with significantly less Co than in an earlier study, shows discharge capacity close to 190 mAhg-1 and specific energy density exceeding 500 mWhg-1 in the 1.5 to 4.3 V range. The material also shows an improved structural stability over similar materials. Such changes, between the pristine phase (P63/mmc, P63 (OP4), or orthorhombic Cmcm) and the so-called Z phase, are endemic to other P2-type cathodes such as Na0.67Mn0.65Fe0.35O2 (NMFO). We propose two equivalent circuit models of impedance spectroscopy to understand electrochemical processes in our cells with a sodium metal anode. Our equivalent circuit modeling, combined with an analysis of the initial galvanostatic slope, reveals a significant reduction in the polarization and interfacial charge-transfer resistance at the solid electrolyte interface. We reveal that the combined effects of crystal structure stability, lower internal resistance, relatively high specific energy density, and improved battery health make this low-cobalt P2-type cathode composition a very promising candidate for new sodium-ion batteries.", - "arxiv_id": "2408.01595v1", - "categories": [ - "cond-mat.mtrl-sci" - ], - "primary_category": "cond-mat.mtrl-sci", - "published_date": "2024-08-02T22:47:52Z", - "updated_date": "2024-08-02T22:47:52Z", - "pdf_url": "https://arxiv.org/pdf/2408.01595v1", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2408.01595v1.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Interplay between Exchange Interaction and Magnetic Shape Anisotropy of ferromagnetic nanoparticles in a non-magnetic matrix for rare-earth-free permanent magnets", - "authors": [ - "Shouvik Sarker", - "Md Mahadi Rajib", - "Radhika Barua", - "Jayasimha Atulasimha" - ], - "abstract": "Developing permanent magnets with fewer critical elements requires understanding hysteresis effects and coercivity through visualizing magnetization reversal. Here, we numerically investigate the effect of the geometry of nanoscale ferromagnetic inclusions in a paramagnetic/non-magnetic matrix to understand the key factors that maximize the magnetic energy product of such nanocomposite systems. Specifically, we have considered a matrix of 3 micron x 3 micron x40 nanometer dimension, which is a sufficiently large volume, two-dimensional representation considering that the ferromagnetic inclusions thickness is less than 3.33% of the lateral dimensions simulated. Using this approach that is representative of bulk behavior while being computationally tractable for simulation, we systematically studied the effect of the thickness of ferromagnetic strips, the separation between the ferromagnetic strips due to the nonmagnetic matrix material, and the length of these ferromagnetic strips on magnetic coercivity and remanence by simulating the hysteresis loop plots for each geometry. Furthermore, we study the underlying micromagnetic mechanism for magnetic reversal to understand the factors that could help attain the maximum magnetic energy densities for ferromagnetic nanocomposite systems in a paramagnetic/non-magnetic material matrix. In this study, we have used material parameters of an exemplary Alnico alloy system, a rare-earth-free, thermally stable nanocomposite, which could potentially replace high-strength NdFeB magnets in applications that don't require large energy products. This can stimulate further experimental work on the fabrication and large-scale manufacturing of RE-free PMs with such nanocomposite systems.", - "arxiv_id": "2408.01550v1", - "categories": [ - "cond-mat.mtrl-sci", - "cond-mat.mes-hall" - ], - "primary_category": "cond-mat.mtrl-sci", - "published_date": "2024-08-02T19:43:33Z", - "updated_date": "2024-08-02T19:43:33Z", - "pdf_url": "https://arxiv.org/pdf/2408.01550v1", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2408.01550v1.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Controllable and Fast Growth of High-Quality Atomically Thin and Atomically Flat Bi$_2$O$_2$Se Films", - "authors": [ - "Yusen Feng", - "Pei Chen", - "Nian Li", - "Suzhe Liang", - "Ke Zhang", - "Minghui Xu", - "Yan Zhao", - "Jie Gong", - "Shu Zhang", - "Huaqian Leng", - "Yuanyuan Zhou", - "Yong Wang", - "Liang Qiao" - ], - "abstract": "As a novel and promising 2D material, bismuth oxyselenide (Bi$_2$O$_2$Se) has demonstrated significant potential to overcome existing technical barriers in various electronic device applications, due to its unique physical properties like high symmetry, adjustable electronic structure, ultra-high electron mobility. However, the rapid growth of Bi$_2$O$_2$Se films down to a few atomic layers with precise control remains a significant challenge. In this work, the growth of two-dimensional (2D) Bi$_2$O$_2$Se thin films by the pulsed laser deposition (PLD) method is systematically investigated. By controlling temperature, oxygen pressure, laser energy density and laser emission frequency, we successfully prepare atomically thin and flat Bi$_2$O$_2$Se (001) thin films on the (001) surface of SrTiO3. Importantly, we provide a fundamental and unique perspective toward understanding the growth process of atomically thin and flat Bi$_2$O$_2$Se films, and the growth process can be primarily summarized into four steps: i) anisotropic non-spontaneous nucleation preferentially along the step roots; ii) monolayer Bi$_2$O$_2$Se nanosheets expanding across the surrounding area, and eventually covering the entire STO substrate step; iii) vertical growth of Bi$_2$O$_2$Se monolayer in a 2D Frank-van der Merwe (FM) epitaxial growth, and iv) with a layer-by-layer 2D FM growth mode, ultimately producing an atomically flat and epitaxially aligned thin film. Moreover, the combined results of the crystallinity quality, surface morphology and the chemical states manifest the successful PLD-growth of high-quality Bi$_2$O$_2$Se films in a controllable and fast mode.", - "arxiv_id": "2408.00976v1", - "categories": [ - "cond-mat.mtrl-sci", - "cond-mat.mes-hall" - ], - "primary_category": "cond-mat.mtrl-sci", - "published_date": "2024-08-02T02:05:11Z", - "updated_date": "2024-08-02T02:05:11Z", - "pdf_url": "https://arxiv.org/pdf/2408.00976v1", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2408.00976v1.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Lecture Notes: many-body quantum dynamics with MCTDH-X", - "authors": [ - "Paolo Molignini", - "Sunayana Dutta", - "Elke Fasshauer" - ], - "abstract": "The lecture notes on \"Many-body Quantum Dynamics with MCTDH-X,\" adapted from the 2023 Heidelberg MCTDH Summer School, provide an in-depth exploration of the Multiconfigurational Time-Dependent Hartree approach for indistinguishable particles. They serve as a comprehensive guide for understanding and utilizing the MCTDH-X software for both bosonic and fermionic systems. The tutorial begins with an introduction to the MCTDH-X software, highlighting its capability to handle various quantum systems, including those with internal degrees of freedom and long-range interactions. The theoretical foundation is then laid out on how to solve the time-dependent and time-independent Schr\\\"odinger equations for many-body systems. The workflow section provides practical instructions on setting up and executing simulations using MCTDH-X. Detailed benchmarks against exact solutions are presented, showcasing the accuracy and reliability of the software in ground-state and dynamic simulations. The notes then delve into the dynamics of quantum systems, covering relaxation processes, time evolution, and the analysis of propagation for both bosonic and fermionic particles. The discussion includes the interpretation of various physical quantities such as energy, density distributions, and orbital occupations. Advanced features of MCTDH-X are also explored in the last section, including the calculation of correlation functions and the creation of visualizations through video tutorials. The notes conclude with a Linux/UNIX command cheat sheet, facilitating ease of use for users operating the software on different systems. Overall, these lecture notes provide a valuable resource for researchers and students in the field of quantum dynamics, offering both theoretical insights and practical guidance on the use of MCTDH-X for studying complex many-body systems.", - "arxiv_id": "2407.20317v1", - "categories": [ - "quant-ph", - "cond-mat.dis-nn", - "cond-mat.mes-hall", - "cond-mat.quant-gas", - "cond-mat.str-el" - ], - "primary_category": "quant-ph", - "published_date": "2024-07-29T18:00:00Z", - "updated_date": "2024-07-29T18:00:00Z", - "pdf_url": "https://arxiv.org/pdf/2407.20317v1", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2407.20317v1.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "A multi-physics model for the evolution of grain microstructure", - "authors": [ - "Izzet Tarik Tandogan", - "Michael Budnitzki", - "Stefan Sandfeld" - ], - "abstract": "When a metal is loaded mechanically at high temperatures, i.e. above 300 $^o$C, its grain microstructure evolves due to multiple physical mechanisms. Two of which are the curvature-driven migration of the grain boundaries due to increased mobility, and the formation of subgrains due to severe plastic deformation. Similar phenomena are observed during heat treatment subsequent to severe plastic deformation. Grain boundary migration and plastic deformation simultaneously change the lattice orientation at any given material point, which is challenging to simulate consistently. The majority of existing simulation approaches tackle this problem by applying separate, specialized models for mechanical deformation and grain boundary migration sequentially. Significant progress was made recognizing that the Cosserat continuum represents an ideal framework for the coupling between different mechanisms causing lattice reorientation, since rotations are native degrees of freedom in this setting. In this work we propose and implement a multi-physics model, which couples Cosserat crystal plasticity to Henry-Mellenthin-Plapp (HMP) type orientation phase-field in a single thermodynamically consistent framework for microstructure evolution. Compared to models based on the Kobayashi-Warren-Carter (KWC) phase-field, the HMP formulation removes the nonphysical term linear in the gradient of orientation from the free energy density, thus eliminating long-range interactions between grain boundaries. Further, HMP orientation phase field can handle inclination-dependent grain boundary energies. We evaluate the model's predictions and numerical performance within a two-dimensional finite element framework, and compare it to a previously published results based on KWC phase-field coupled with Cosserat mechanics.", - "arxiv_id": "2407.18088v1", - "categories": [ - "cond-mat.mtrl-sci" - ], - "primary_category": "cond-mat.mtrl-sci", - "published_date": "2024-07-25T14:51:01Z", - "updated_date": "2024-07-25T14:51:01Z", - "pdf_url": "https://arxiv.org/pdf/2407.18088v1", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2407.18088v1.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Vacuum induced three-body delocalization in cavity quantum materials", - "authors": [ - "Zhengxin Guo", - "Zi Cai" - ], - "abstract": "In this study, we demonstrate that the vacuum itself suffices to delocalize an Anderson insulator inside a cavity. By studying a disordered one-dimensional spinless fermion system coupled to a single photon mode describing the vacuum fluctuation, we find that even though the cavity mode does not qualitatively change the localization behavior for a single-fermion system, it indeed leads to delocalization via a vacuum fluctuation-induced correlated hopping mechanism for systems with at least three fermions. A mobility edge separating the low-energy localized eigenstates and the high-energy delocalized eigenstates has been revealed. It is shown that such a one-dimensional three-fermion system in with correlated hopping can be mapped to a single-particle system with hopping along the face diagonals in a three dimensional lattice. The effect of the dissipation as well as a many-body generalization have also been discussed.", - "arxiv_id": "2407.15032v1", - "categories": [ - "cond-mat.dis-nn", - "cond-mat.str-el" - ], - "primary_category": "cond-mat.dis-nn", - "published_date": "2024-07-21T01:50:38Z", - "updated_date": "2024-07-21T01:50:38Z", - "pdf_url": "https://arxiv.org/pdf/2407.15032v1", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2407.15032v1.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "A machine-learned kinetic energy model for light weight metals and compounds of group III-V elements", - "authors": [ - "Johann L\u00fcder", - "Manabu Ihara", - "Sergei Manzhos" - ], - "abstract": "We present a machine-learned (ML) model of kinetic energy for orbital-free density functional theory (OF-DFT) suitable for bulk light weight metals and compounds made of group III-V elements. The functional is machine-learned with Gaussian process regression (GPR) from data computed with Kohn-Sham DFT with plane wave bases and local pseudopotentials. The dataset includes multiple phases of unary, binary, and ternary compounds containing Li, Al, Mg, Si, As, Ga, Sb, Na, Sn, P, and In. A total of 433 materials were used for training, and 18 strained structures were used for each material. Averaged (over the unit cell) kinetic energy density is fitted as a function of averaged terms of the 4th order gradient expansion and the product of the density and effective potential. The kinetic energy predicted by the model allows reproducing energy-volume curves around equilibrium geometry with good accuracy. We show that the GPR model beats linear and polynomial regressions. We also find that unary compounds sample a wider region of the descriptor space than binary and ternary compounds, and it is therefore important to include them in the training set; a GPR model trained on a small number of unary compounds is able to extrapolate relatively well to binary and ternary compounds but not vice versa.", - "arxiv_id": "2407.11450v1", - "categories": [ - "cond-mat.mtrl-sci", - "physics.chem-ph" - ], - "primary_category": "cond-mat.mtrl-sci", - "published_date": "2024-07-16T07:35:22Z", - "updated_date": "2024-07-16T07:35:22Z", - "pdf_url": "https://arxiv.org/pdf/2407.11450v1", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2407.11450v1.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Dynamical Quantum Phase Transition and Thermal Equilibrium in the Lattice Thirring Model", - "authors": [ - "Mari Carmen Ba\u00f1uls", - "Krzysztof Cichy", - "Hao-Ti Hung", - "Ying-Jer Kao", - "C. -J. David Lin", - "Amit Singh" - ], - "abstract": "Using tensor network methods, we simulate the real-time evolution of the lattice Thirring model quenched out of equilibrium in both the critical and massive phases, and study the appearance of dynamical quantum phase transitions, as non-analyticities in the Loschmidt rate. Whereas the presence of a dynamical quantum phase transition in the model does not correspond to quenches across the critical line of the equilibrium phase diagram at zero temperature, we identify a threshold in the energy density of the initial state, necessary for a dynamical quantum phase transition to be present. Moreover, in the case of the gapped quench Hamiltonian, we unveil a connection of this threshold to a transition between different regions in the finite temperature phase diagram.", - "arxiv_id": "2407.11295v1", - "categories": [ - "hep-lat", - "cond-mat.stat-mech", - "cond-mat.str-el", - "quant-ph" - ], - "primary_category": "hep-lat", - "published_date": "2024-07-16T00:51:01Z", - "updated_date": "2024-07-16T00:51:01Z", - "pdf_url": "https://arxiv.org/pdf/2407.11295v1", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2407.11295v1.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Hyperbolic Spin Liquids", - "authors": [ - "Patrick M. Lenggenhager", - "Santanu Dey", - "Tom\u00e1\u0161 Bzdu\u0161ek", - "Joseph Maciejko" - ], - "abstract": "Hyperbolic lattices present a unique opportunity to venture beyond the conventional paradigm of crystalline many-body physics and explore correlated phenomena in negatively curved space. As a theoretical benchmark for such investigations, we extend Kitaev's spin-1/2 honeycomb model to hyperbolic lattices and exploit their non-Euclidean space-group symmetries to solve the model exactly. We elucidate the ground-state phase diagram on the $\\{8,3\\}$ lattice and find a gapped $\\mathbb{Z}_2$ spin liquid with Abelian anyons, a gapped chiral spin liquid with non-Abelian anyons and chiral edge states, and a compressible spin liquid with low-energy density of states dominated by non-Abelian Bloch states of Majorana fermions.", - "arxiv_id": "2407.09601v1", - "categories": [ - "cond-mat.str-el", - "cond-mat.mes-hall", - "cond-mat.other", - "quant-ph" - ], - "primary_category": "cond-mat.str-el", - "published_date": "2024-07-12T18:00:01Z", - "updated_date": "2024-07-12T18:00:01Z", - "pdf_url": "https://arxiv.org/pdf/2407.09601v1", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2407.09601v1.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Grain boundaries control lithiation of solid solution substrates in lithium metal batteries", - "authors": [ - "Leonardo Shoji Aota", - "Chanwon Jung", - "Siyuan Zhang", - "\u00d6mer K. B\u00fcy\u00fckuslu", - "Poonam Yadav", - "Mahander Pratap Singh", - "Xinren Chen", - "Eric Woods", - "Christina Scheu", - "Se-Ho Kim", - "Dierk Raabe", - "Baptiste Gault" - ], - "abstract": "The development of sustainable transportation and communication systems requires an increase in both energy density and capacity retention of Li-batteries. Using substrates forming a solid solution with body centered cubic Li enhances the cycle stability of anode-less batteries. However, it remains unclear how the substrate microstructure affects the lithiation behavior. Here, we deploy a correlative, near-atomic scale probing approach through combined ion- and electron-microscopy to examine the distribution of Li in Li-Ag diffusion couples as model system. We reveal that Li regions with over 93.8% at.% nucleate within Ag at random high angle grain boundaries, whereas grain interiors are not lithiated. We evidence the role of kinetics and mechanical constraint from the microstructure over equilibrium thermodynamics in dictating the lithiation process. The findings suggest that grain size and grain boundary character are critical to enhance the electrochemical performance of interlayers/electrodes, particularly for improving lithiation kinetics and hence reducing dendrite formation.", - "arxiv_id": "2407.09374v1", - "categories": [ - "cond-mat.mtrl-sci", - "physics.chem-ph" - ], - "primary_category": "cond-mat.mtrl-sci", - "published_date": "2024-07-12T15:55:53Z", - "updated_date": "2024-07-12T15:55:53Z", - "pdf_url": "https://arxiv.org/pdf/2407.09374v1", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2407.09374v1.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Thermalization and Criticality on an Analog-Digital Quantum Simulator", - "authors": [ - "Trond I. Andersen", - "Nikita Astrakhantsev", - "Amir H. Karamlou", - "Julia Berndtsson", - "Johannes Motruk", - "Aaron Szasz", - "Jonathan A. Gross", - "Alexander Schuckert", - "Tom Westerhout", - "Yaxing Zhang", - "Ebrahim Forati", - "Dario Rossi", - "Bryce Kobrin", - "Agustin Di Paolo", - "Andrey R. Klots", - "Ilya Drozdov", - "Vladislav D. Kurilovich", - "Andre Petukhov", - "Lev B. Ioffe", - "Andreas Elben", - "Aniket Rath", - "Vittorio Vitale", - "Benoit Vermersch", - "Rajeev Acharya", - "Laleh Aghababaie Beni", - "Kyle Anderson", - "Markus Ansmann", - "Frank Arute", - "Kunal Arya", - "Abraham Asfaw", - "Juan Atalaya", - "Brian Ballard", - "Joseph C. Bardin", - "Andreas Bengtsson", - "Alexander Bilmes", - "Gina Bortoli", - "Alexandre Bourassa", - "Jenna Bovaird", - "Leon Brill", - "Michael Broughton", - "David A. Browne", - "Brett Buchea", - "Bob B. Buckley", - "David A. Buell", - "Tim Burger", - "Brian Burkett", - "Nicholas Bushnell", - "Anthony Cabrera", - "Juan Campero", - "Hung-Shen Chang", - "Zijun Chen", - "Ben Chiaro", - "Jahan Claes", - "Agnetta Y. Cleland", - "Josh Cogan", - "Roberto Collins", - "Paul Conner", - "William Courtney", - "Alexander L. Crook", - "Sayan Das", - "Dripto M. Debroy", - "Laura De Lorenzo", - "Alexander Del Toro Barba", - "Sean Demura", - "Paul Donohoe", - "Andrew Dunsworth", - "Clint Earle", - "Alec Eickbusch", - "Aviv Moshe Elbag", - "Mahmoud Elzouka", - "Catherine Erickson", - "Lara Faoro", - "Reza Fatemi", - "Vinicius S. Ferreira", - "Leslie Flores Burgos", - "Austin G. Fowler", - "Brooks Foxen", - "Suhas Ganjam", - "Robert Gasca", - "William Giang", - "Craig Gidney", - "Dar Gilboa", - "Marissa Giustina", - "Raja Gosula", - "Alejandro Grajales Dau", - "Dietrich Graumann", - "Alex Greene", - "Steve Habegger", - "Michael C. Hamilton", - "Monica Hansen", - "Matthew P. Harrigan", - "Sean D. Harrington", - "Stephen Heslin", - "Paula Heu", - "Gordon Hill", - "Markus R. Hoffmann", - "Hsin-Yuan Huang", - "Trent Huang", - "Ashley Huff", - "William J. Huggins", - "Sergei V. Isakov", - "Evan Jeffrey", - "Zhang Jiang", - "Cody Jones", - "Stephen Jordan", - "Chaitali Joshi", - "Pavol Juhas", - "Dvir Kafri", - "Hui Kang", - "Kostyantyn Kechedzhi", - "Trupti Khaire", - "Tanuj Khattar", - "Mostafa Khezri", - "M\u00e1ria Kieferov\u00e1", - "Seon Kim", - "Alexei Kitaev", - "Paul V. Klimov", - "Alexander N. Korotkov", - "Fedor Kostritsa", - "John Mark Kreikebaum", - "David Landhuis", - "Brandon W. Langley", - "Pavel Laptev", - "Kim-Ming Lau", - "Lo\u00efck Le Guevel", - "Justin Ledford", - "Joonho Lee", - "Kenny Lee", - "Yuri D. Lensky", - "Brian J. Lester", - "Wing Yan Li", - "Alexander T. Lill", - "Wayne Liu", - "William P. Livingston", - "Aditya Locharla", - "Daniel Lundahl", - "Aaron Lunt", - "Sid Madhuk", - "Ashley Maloney", - "Salvatore Mandr\u00e0", - "Leigh S. Martin", - "Orion Martin", - "Steven Martin", - "Cameron Maxfield", - "Jarrod R. McClean", - "Matt McEwen", - "Seneca Meeks", - "Kevin C. Miao", - "Amanda Mieszala", - "Sebastian Molina", - "Shirin Montazeri", - "Alexis Morvan", - "Ramis Movassagh", - "Charles Neill", - "Ani Nersisyan", - "Michael Newman", - "Anthony Nguyen", - "Murray Nguyen", - "Chia-Hung Ni", - "Murphy Yuezhen Niu", - "William D. Oliver", - "Kristoffer Ottosson", - "Alex Pizzuto", - "Rebecca Potter", - "Orion Pritchard", - "Leonid P. Pryadko", - "Chris Quintana", - "Matthew J. Reagor", - "David M. Rhodes", - "Gabrielle Roberts", - "Charles Rocque", - "Eliott Rosenberg", - "Nicholas C. Rubin", - "Negar Saei", - "Kannan Sankaragomathi", - "Kevin J. Satzinger", - "Henry F. Schurkus", - "Christopher Schuster", - "Michael J. Shearn", - "Aaron Shorter", - "Noah Shutty", - "Vladimir Shvarts", - "Volodymyr Sivak", - "Jindra Skruzny", - "Spencer Small", - "W. Clarke Smith", - "Sofia Springer", - "George Sterling", - "Jordan Suchard", - "Marco Szalay", - "Alex Sztein", - "Douglas Thor", - "Alfredo Torres", - "M. Mert Torunbalci", - "Abeer Vaishnav", - "Sergey Vdovichev", - "Benjamin Villalonga", - "Catherine Vollgraff Heidweiller", - "Steven Waltman", - "Shannon X. Wang", - "Theodore White", - "Kristi Wong", - "Bryan W. Woo", - "Cheng Xing", - "Z. Jamie Yao", - "Ping Yeh", - "Bicheng Ying", - "Juhwan Yoo", - "Noureldin Yosri", - "Grayson Young", - "Adam Zalcman", - "Ningfeng Zhu", - "Nicholas Zobrist", - "Hartmut Neven", - "Ryan Babbush", - "Sergio Boixo", - "Jeremy Hilton", - "Erik Lucero", - "Anthony Megrant", - "Julian Kelly", - "Yu Chen", - "Vadim Smelyanskiy", - "Guifre Vidal", - "Pedram Roushan", - "Andreas M. Lauchli", - "Dmitry A. Abanin", - "Xiao Mi" - ], - "abstract": "Understanding how interacting particles approach thermal equilibrium is a major challenge of quantum simulators. Unlocking the full potential of such systems toward this goal requires flexible initial state preparation, precise time evolution, and extensive probes for final state characterization. We present a quantum simulator comprising 69 superconducting qubits which supports both universal quantum gates and high-fidelity analog evolution, with performance beyond the reach of classical simulation in cross-entropy benchmarking experiments. Emulating a two-dimensional (2D) XY quantum magnet, we leverage a wide range of measurement techniques to study quantum states after ramps from an antiferromagnetic initial state. We observe signatures of the classical Kosterlitz-Thouless phase transition, as well as strong deviations from Kibble-Zurek scaling predictions attributed to the interplay between quantum and classical coarsening of the correlated domains. This interpretation is corroborated by injecting variable energy density into the initial state, which enables studying the effects of the eigenstate thermalization hypothesis (ETH) in targeted parts of the eigenspectrum. Finally, we digitally prepare the system in pairwise-entangled dimer states and image the transport of energy and vorticity during thermalization. These results establish the efficacy of superconducting analog-digital quantum processors for preparing states across many-body spectra and unveiling their thermalization dynamics.", - "arxiv_id": "2405.17385v2", - "categories": [ - "quant-ph", - "cond-mat.mes-hall", - "cond-mat.str-el" - ], - "primary_category": "quant-ph", - "published_date": "2024-05-27T17:40:39Z", - "updated_date": "2024-07-08T18:10:27Z", - "pdf_url": "https://arxiv.org/pdf/2405.17385v2", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2405.17385v2.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Experimental and Computational Insights Into the Magnetic Anisotropy and Magnetic Behaviour of Layered Room-Temperature Ferromagnet Cr$_{1.38}$Te$_2$", - "authors": [ - "Shubham Purwar", - "Tushar Kanti Bhowmik", - "Tijare Mandar Rajesh", - "Anupam Gorai", - "Bheema Lingam Chittari", - "S. Thirupathaiah" - ], - "abstract": "We investigate the structural, magnetocrystalline anisotropy, critical behaviour, and magnetocaloric effect in the layered room-temperature monoclinic ferromagnet Cr$_{1.38}$Te$_2$. The critical behavior is studied by employing various techniques such as the modified Arrott plot (MAP), the Kouvel-Fisher method (KF), and the critical isothermal analysis (CI) around the Curie temperature ($T_C$) of 316 K. The derived critical exponents are self-consistent and obey the rescaling analysis. The Monte-Carlo simulations reproduce the experimentally obtained critical exponents. However, the derived critical exponents do not suggest any single universality class of the magnetic interactions. On the other hand, the renormalization group (RG) theory suggests 3D-Ising type long-range exchange interactions [$J(r)$], decaying with distance ($r$) as $J (r) = r^{-(d+\\sigma)}= r^{-4.73}$. Further, magnetocrystalline anisotropy energy density (K$_u$) is found to be temperature dependent. The ground state magnetic easy-axis ($b$-axis) is identified by analyzing the magnetocrystalline anisotropy energy (MAE) using the density functional theory calculations. Maximum entropy change -$\\Delta S_{m}^{max}$$\\approx$2.51 J/kg-K is found near the $T_C$.", - "arxiv_id": "2406.16831v1", - "categories": [ - "cond-mat.mtrl-sci" - ], - "primary_category": "cond-mat.mtrl-sci", - "published_date": "2024-06-24T17:39:46Z", - "updated_date": "2024-06-24T17:39:46Z", - "pdf_url": "https://arxiv.org/pdf/2406.16831v1", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2406.16831v1.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Tuning the thermal conductivity of silicon nanowires by surface passivation", - "authors": [ - "C\u00e9line Ruscher", - "Robinson Cortes-Huerto", - "Robert Hannebauer", - "Debashish Mukherji", - "Alireza Nojeh", - "A. Srikantha Phani" - ], - "abstract": "Using large scale molecular dynamics simulations, we study the thermal conductivity of bare and surface passivated silicon nanowires (SiNWs). For the cross-sectional widths $w \\le 2$ nm, SiNWs become unstable because of the surface amorphosization and also due to the evaporation of a certain fraction of Si atoms. The observed surface (in-)stability is related to a large excess energy $\\Delta$ of the surface Si atoms with respect to the bulk Si, resulting from the surface atoms being less coordinated and having dangling bonds.We first propose a practically relevant method that uses $\\Delta$ as a guiding tool to passivate these dangling bonds with hydrogen or oxygen, stabilizing the SiNWs. These passivated SiNWs are used to calculate the thermal conductivity coefficient $\\kappa$.While the expected trend of $\\kappa \\propto w$ is observed for all SiNWs, surface passivation provides an added flexibility of tuning $\\kappa$ with the surface coverage concentration $c$ of passivated atoms.Indeed, with respect to the bulk $\\kappa$, passivation of SiNW reduces $\\kappa$ by 75-80\\% for $c \\to 50\\%$ and recovers again by 50\\% for the fully passivated samples. Analyzing the phonon band structures via spectral energy density, we discuss separate contributions from the surface and the core to $\\kappa$. Our results also reveal that surface passivation increases SiNW stiffness, contributing to the tunability in $\\kappa$.", - "arxiv_id": "2304.11707v3", - "categories": [ - "cond-mat.mes-hall", - "cond-mat.mtrl-sci" - ], - "primary_category": "cond-mat.mes-hall", - "published_date": "2023-04-23T17:50:42Z", - "updated_date": "2024-06-24T00:44:57Z", - "pdf_url": "https://arxiv.org/pdf/2304.11707v3", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2304.11707v3.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Local quenches in fracton field theory: Lieb-Robinson bound, non-causal dynamics and fractal excitation patterns", - "authors": [ - "Dmitry S. Ageev", - "Andrey A. Bagrov", - "Aleksandr I. Belokon", - "Askar Iliasov", - "Vasilii V. Pushkarev", - "Femke Verheijen" - ], - "abstract": "We study the out-of-equilibrium dynamics induced by a local perturbation in fracton field theory. For the ${\\mathbb Z}_4$ and ${\\mathbb Z}_8$-symmetric free fractonic theories, we compute the time dynamics of several observables such as the two-point Green function, $\\langle \\phi^2 \\rangle$ condensate, energy density, and the dipole momentum. The time-dependent considerations highlight that the free fractonic theory breaks causality and exhibits instantaneous signal propagation, even if an additional relativistic term is included to enforce a speed limit in the system. We show that it is related to the fact that the Lieb-Robinson bound does not hold in the continuum limit of the fracton field theory, and the effective bounded speed of light does not emerge. For the theory in finite volume, we show that the fracton wave front acquires fractal shape with non-trivial Hausdorff dimension, and argue that this phenomenon cannot be explained by a simple self-interference effect.", - "arxiv_id": "2310.11197v4", - "categories": [ - "hep-th", - "cond-mat.str-el", - "quant-ph" - ], - "primary_category": "hep-th", - "published_date": "2023-10-17T12:21:15Z", - "updated_date": "2024-06-23T12:11:57Z", - "pdf_url": "https://arxiv.org/pdf/2310.11197v4", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2310.11197v4.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Negative Refraction in isotropic achiral and chiral materials", - "authors": [ - "Y. B. Band", - "Igor Kuzmenko", - "Marek Trippenbach" - ], - "abstract": "We show that negative refraction in materials can occur at frequencies $\\omega$ where the real parts of the permittivity $\\veps(\\omega)$ and the permeability $\\mu(\\omega)$ have different sign, and that light with such frequencies can propagate just as well as light with frequencies where they have equal sign. Therefore, for negative refraction one does not need to be in the ``double-negative'' regime. We consider negative refractive index achiral materials using the Drude-Lorentz model and chiral materials using the Drude-Born-Fedorov model. We find that the time-averaged Poynting vector always points along the wave vector, the time-averaged energy-flux density is always positive, and the time-averaged energy density is positive (negative) when the refractive index is positive (negative). The phase velocity is negative when the real part of the refractive index is negative, and the group velocity generally changes sign several times as a function of frequency near resonance.", - "arxiv_id": "2308.12019v2", - "categories": [ - "physics.optics", - "cond-mat.mtrl-sci" - ], - "primary_category": "physics.optics", - "published_date": "2023-08-23T09:26:19Z", - "updated_date": "2024-06-21T12:55:16Z", - "pdf_url": "https://arxiv.org/pdf/2308.12019v2", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2308.12019v2.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Cavity engineered phonon-mediated superconductivity in MgB$_2$ from first principles quantum electrodynamics", - "authors": [ - "I-Te Lu", - "Dongbin Shin", - "Mark Kamper Svendsen", - "Hannes H\u00fcbener", - "Umberto De Giovannini", - "Simone Latini", - "Michael Ruggenthaler", - "Angel Rubio" - ], - "abstract": "Strong laser pulses can control superconductivity, inducing non-equilibrium transient pairing by leveraging strong-light matter interaction. Here we demonstrate theoretically that equilibrium ground-state phonon-mediated superconductive pairing can be affected through the vacuum fluctuating electromagnetic field in a cavity. Using the recently developed ab initio quantum electrodynamical density-functional theory approximation, we specifically investigate the phonon-mediated superconductive behavior of MgB$_2$ under different cavity setups and find that in the strong light-matter coupling regime its superconducting transition temperature can be, in principles, enhanced by $\\approx 73\\%$ ($\\approx 40\\%$) in an in-plane (out-of-plane) polarized cavity. However, in a realistic cavity, we expect the T$_{\\rm{c}}$ of MgB$_2$ can increase, at most, by $5$ K via photon vacuum fluctuations. The results highlight that strong light-matter coupling in extended systems can profoundly alter material properties in a non-perturbative way by modifying their electronic structure and phononic dispersion at the same time. Our findings indicate a pathway to the experimental realization of light-controlled superconductivity in solid-state materials at equilibrium via cavity-material engineering.", - "arxiv_id": "2404.08122v3", - "categories": [ - "cond-mat.supr-con", - "cond-mat.mtrl-sci", - "physics.app-ph", - "physics.comp-ph" - ], - "primary_category": "cond-mat.supr-con", - "published_date": "2024-04-11T20:59:23Z", - "updated_date": "2024-06-20T11:21:45Z", - "pdf_url": "https://arxiv.org/pdf/2404.08122v3", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2404.08122v3.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Realized Stable BP-N at Ambient Pressure by Phosphorus Doping", - "authors": [ - "Guo Chen", - "Chengfeng Zhang", - "Yuanqin Zhu", - "Bingqing cao", - "Jie Zhang", - "Xianlong Wang" - ], - "abstract": "Black phosphorus nitrogen (BP-N) is an attractive high-energy-density material. However, high-pressure synthesized BP-N will decompose at low-pressure and cannot be quenched to ambient conditions. Finding a method to stabilize it at 0 GPa is of great significance for its practical applications. However, unlike cg-N, LP-N, and HLP-N, it is always a metastable phase at high-pressure up to 260 GPa, and decomposes into chains at 23 GPa. Here, based on the first-principles simulations, we find that P atom doping can effectively reduce the synthesis pressure of BP-N and maintain its stability at 0 GPa. Uniform distribution of P atom dopants within the layer helps maintain the structural stability of BP-N layer at 0 GPa, while interlayer electrostatic interaction induced by N-P dipoles enhances its dynamic stability by eliminating interlayer slipping. Furthermore, pressure is conducive to enhancing the stability of BP-N and its doped forms by suppressing N-chain dissociation. For the configuration with 12.5% doping concentration, a gravimetric energy density of 8.07 kJ/g can be realized, which is nearly two times higher than TNT.", - "arxiv_id": "2405.06212v2", - "categories": [ - "cond-mat.mtrl-sci", - "physics.chem-ph" - ], - "primary_category": "cond-mat.mtrl-sci", - "published_date": "2024-05-10T02:50:13Z", - "updated_date": "2024-06-20T02:52:40Z", - "pdf_url": "https://arxiv.org/pdf/2405.06212v2", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2405.06212v2.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Inside the Working Mechanism of Meta-generalized Gradient Density Functional Approximations: The Example of Quantum Spin-Hall Insulator 1T`-WTe2", - "authors": [ - "Li Yin", - "Hong Tang", - "Adrienn Ruzsinszky" - ], - "abstract": "Quantum spin Hall (QSH) insulators have attracted intensive experimental and theoretical studies due to their beneficial applications in spintronic devices. Density functional theory (DFT) meets challenges when describing the electronic structure of QSH materials. Only the Heyd-Scuseria-Ernzerhof (HSE06) with spin-orbit coupling (SOC) is effective in revealing the band opening in the typical QSH 1T`-WTe2, but with increased computational demands. Here, using DFT, Wannier function simulations, the screened hybrid HSE06 functional, and first-principles-based many body perturbation theory GW, we investigate the sensitive electronic structure in monolayer 1T`-WTe2, with advanced meta-generalized gradient (meta-GGA) density functional approximations. The success of the recent SCAN and r2SCAN meta-GGAs left their predecessor meta-GGA made very simple (MVS) ignored by the scientific community. Largely unnoticed were the increased band gaps of MVS compared to any semilocal approximation including SCAN. We find that the non-empirical MVS approximation yields a positive fundamental band gap, without any help from exact exchange, Hubbard U, or SOC correction. We explain the success of the meta-GGA MVS for the band gap in 1T`-WTe2 by presenting two working mechanisms in meta-GGA approximations. Besides, we point out the difficulty of using G0W0 for 1T`-WTe2. Although the single shot GW correction with an MVS reference yields a smaller band gap than GW with PBE, the G0W0@MVS is still not suitable for simulating 1T`-WTe2, due to its negative band gap. These DFT and beyond DFT results highlight the importance of meta-GGAs and novel construction schemes with enhanced kinetic energy density dependence. The MVS approximation re-appears as an appealing alternative for accurately describing 1T`-WTe2, paving an efficient way for exploring other two-dimensional QSH materials in high-throughput calculations.", - "arxiv_id": "2406.12124v1", - "categories": [ - "cond-mat.mtrl-sci", - "cond-mat.other" - ], - "primary_category": "cond-mat.mtrl-sci", - "published_date": "2024-06-17T22:09:06Z", - "updated_date": "2024-06-17T22:09:06Z", - "pdf_url": "https://arxiv.org/pdf/2406.12124v1", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2406.12124v1.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Temperature-Induced Hexagonal-Orthorhombic Phase Transition in Lutetium Ferrite Nanoparticles", - "authors": [ - "Olena M. Fesenko", - "Igor V. Fesych", - "Igor V. Zatovsky", - "Andrii D. Yaremkevych", - "Maxim Rallev", - "Andrii V. Bodnaruk", - "Eugene A. Eliseev", - "Anna N. Morozovska" - ], - "abstract": "The X-ray diffraction, Raman and infrared spectroscopies and magnetic measurements were used to explore the correlated changes of the structure, lattice dynamics and magnetic properties of the LuFeO3 nanoparticles, which appear in dependence on their sintering temperature. We revealed a gradual substitution of the hexagonal phase by the orthorhombic phase in the nanoparticles, which sintering temperature increases from 700 C to 1100 C. The origin and stability of the hexagonal phase in the LuFeO3 nanoparticles is of the special interest, because the nanoparticle in the phase can be a room-temperature multiferroic with a weak ferromagnetic and pronounced structural and ferroelectric long-range ordering, while the antiferromagnetic and nonpolar orthorhombic phase is more stable in the bulk LuFeO3. To define the ranges of the hexagonal phase stability, we determine the bulk and interface energy densities of different phases from the comparison of the Gibbs model with experimental results. Using the Gibbs model parameters, we predict the influence of size effects and temperature on the structural and polar properties of the LuFeO3 nanoparticles. Analysis of the obtained results shows that the combination of the X-ray diffraction, Raman and infrared spectroscopy, magnetic measurements and theoretical modelling of structural and polar properties allows to establish the interplay between the phase composition, lattice dynamics and multiferroic properties of the LuFeO3 nanoparticles prepared in different conditions.", - "arxiv_id": "2309.09109v6", - "categories": [ - "cond-mat.mtrl-sci", - "cond-mat.mes-hall" - ], - "primary_category": "cond-mat.mtrl-sci", - "published_date": "2023-09-16T23:05:27Z", - "updated_date": "2024-06-16T10:43:25Z", - "pdf_url": "https://arxiv.org/pdf/2309.09109v6", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2309.09109v6.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Fractionalized Prethermalization in a Driven Quantum Spin Liquid", - "authors": [ - "Hui-Ke Jin", - "Johannes Knolle", - "Michael Knap" - ], - "abstract": "Quantum spin liquids subject to a periodic drive can display fascinating non-equilibrium heating behavior because of their emergent fractionalized quasi-particles. Here, we investigate a driven Kitaev honeycomb model and examine the dynamics of emergent Majorana matter and $Z_2$ flux excitations. We uncover a distinct two-step heating profile $\\textrm{--}$ dubbed fractionalized prethermalization $\\textrm{--}$ and a quasi-stationary state with vastly different temperatures for the matter and the flux sectors. We argue that this peculiar prethermalization behavior is a consequence of fractionalization. Furthermore, we discuss an experimentally feasible protocol for preparing a zero-flux initial state of the Kiteav honeycomb model with a low energy density, which can be used to observe fractionalized prethermalization in quantum information processing platforms.", - "arxiv_id": "2211.10453v4", - "categories": [ - "cond-mat.str-el", - "cond-mat.quant-gas", - "cond-mat.stat-mech" - ], - "primary_category": "cond-mat.str-el", - "published_date": "2022-11-18T19:00:01Z", - "updated_date": "2024-06-12T07:40:16Z", - "pdf_url": "https://arxiv.org/pdf/2211.10453v4", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2211.10453v4.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Theory of intrinsic acoustic plasmons in twisted bilayer graphene", - "authors": [ - "Lorenzo Cavicchi", - "Iacopo Torre", - "Pablo Jarillo-Herrero", - "Frank H. L. Koppens", - "Marco Polini" - ], - "abstract": "We present a theoretical study of the intrinsic plasmonic properties of twisted bilayer graphene (TBG) as a function of the twist angle $\\theta$ (and other microscopic parameters such as temperature and filling factor). Our calculations, which rely on the random phase approximation, take into account four crucially important effects, which are treated on equal footing: i) the layer-pseudospin degree of freedom, ii) spatial non-locality of the density-density response function, iii) crystalline local field effects, and iv) Hartree self-consistency. We show that the plasmonic spectrum of TBG displays a smooth transition from a strongly-coupled regime (at twist angles $\\theta \\lesssim 2^{\\circ}$), where the low-energy spectrum is dominated by a weakly dispersive intra-band plasmon, to a weakly-coupled regime (for twist angles $\\theta \\gtrsim 2^{\\circ}$) where an acoustic plasmon clearly emerges. This crossover offers the possibility of realizing tunable mid-infrared sub-wavelength cavities, whose vacuum fluctuations may be used to manipulate the ground state of strongly correlated electron systems.", - "arxiv_id": "2401.16384v2", - "categories": [ - "cond-mat.mes-hall", - "cond-mat.str-el" - ], - "primary_category": "cond-mat.mes-hall", - "published_date": "2024-01-29T18:24:40Z", - "updated_date": "2024-06-07T15:34:59Z", - "pdf_url": "https://arxiv.org/pdf/2401.16384v2", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2401.16384v2.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Wide-bandgap semiconductor of three-dimensional unconventional stoichiometric NaCl2 crystal", - "authors": [ - "Siyan Gao", - "Junlin Jia", - "Xu Wang", - "Yue-Yu Zhang", - "Yijie Xiang", - "Pei Li", - "Ruobing Yi", - "Xuchang Su", - "Guosheng Shi", - "Feifei Qin", - "Yi-Feng Zheng", - "Lei Chen", - "Yu Qiang", - "Junjie Zhang", - "Lei Zhang", - "Haiping Fang" - ], - "abstract": "The expanding applications call for novel new-generation wide-bandgap semiconductors. Here, we show that a compound only composed of the ordinary elements Na and Cl, namely three-dimensional NaCl2 crystal, is a wide-bandgap semiconductor. This finding benefits from the breaking of conventional stoichiometry frameworks in the theoretical design, leading to the discovery of three-dimensional XY2 (X = Na, Li, K; Y = Cl, F, Br, I) crystals, with covalent bonds of Y pairs inducing the wide bandgap from 2.24 to 4.45 eV. Crucially, such an unexpected NaCl2 crystal was successfully synthesized under ambient conditions. The unconventional stoichiometric strategy with other chemical elements potentially yields more wide-bandgap semiconductors, offering the capability for bandgap tuning. These unconventional stoichiometric materials may also exhibit superconductivity, transparent inorganic electrides, high-energy-density, and beyond.", - "arxiv_id": "2406.12889v1", - "categories": [ - "cond-mat.mtrl-sci" - ], - "primary_category": "cond-mat.mtrl-sci", - "published_date": "2024-06-04T01:44:33Z", - "updated_date": "2024-06-04T01:44:33Z", - "pdf_url": "https://arxiv.org/pdf/2406.12889v1", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2406.12889v1.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Thermodynamics of Sodium-Lead Alloys for Negative Electrodes from First-Principles", - "authors": [ - "Damien K. J. Lee", - "Zeyu Deng", - "Gopalakrishnan Sai Gautam", - "Pieremanuele Canepa" - ], - "abstract": "Metals, such as tin, antimony, and lead (Pb) have garnered renewed attention for their potential use as alloyant-negative electrode materials in sodium (Na)-ion batteries (NIBs). Despite Pb's toxicity and its high molecular weight, lead is one of the most commonly recycled metals, positioning Pb as a promising candidate for a cost-effective, high-capacity anode material. Understanding the miscibility of Na into Pb is crucial for the development of high-energy density negative electrode materials for NIBs. Using a first-principles multiscale approach, we analyze the thermodynamic properties and estimate the Na-alloying voltage of the Na-Pb system by constructing the compositional phase diagram. In the Pb-Na system, we elucidate the phase boundaries of important phases, such as Pb-rich face-centered cubic and $\\beta$-NaPb$_3$, thereby improving our understanding of the phase diagram of the Na-Pb alloy. Due to the strong ordering tendencies of the Na-Pb intermetallics (such as NaPb, Na$_5$Pb$_2$, and Na$_{15}$Pb$_4$), we do not observe any solid-solution behavior at intermediate and high Na concentrations.", - "arxiv_id": "2405.15898v1", - "categories": [ - "cond-mat.mtrl-sci" - ], - "primary_category": "cond-mat.mtrl-sci", - "published_date": "2024-05-24T19:34:38Z", - "updated_date": "2024-05-24T19:34:38Z", - "pdf_url": "https://arxiv.org/pdf/2405.15898v1", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2405.15898v1.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Extension of the SpK Atomic Physics Code to Generate Global Equation of State Data", - "authors": [ - "Adam R. Fraser", - "A. J. Crilly", - "N. P. L. Niasse", - "D. A. Chapman", - "J. D. Pecover", - "S. J. O'Neill", - "J. P. Chittenden" - ], - "abstract": "Global microphysics models are required for the modelling of high-energy-density physics (HEDP) experiments, the improvement of which are critical to the path to inertial fusion energy. This work presents further developments to the atomic and microphysics code, SpK, part of the numerical modelling suite of Imperial College London and First Light Fusion. We extend the capabilities of SpK to allow the calculation of the equation of state (EoS). The detailed configuration accounting calculations are interpolated into finite-temperature Thomas-Fermi calculations at high coupling to form the electronic component of the model. The Cowan model provides the ionic contribution, modified to approximate the physics of diatomic molecular dissociation. By utilising bonding corrections and performing a Maxwell construction, SpK captures the EoS from states ranging from the zero-pressure solid, through the liquid-vapour coexistence region and into plasma states. This global approach offers the benefit of capturing electronic shell structure over large regions of parameter space, building highly-resolved tables in minutes on a simple desktop. We present shock Hugoniot and off-Hugoniot calculations for a number of materials, comparing SpK to other models and experimental data. We also apply EoS and opacity data generated by SpK in integrated simulations of indirectly-driven capsule implosions, highlighting physical sensitivities to the choice of EoS models.", - "arxiv_id": "2405.13814v1", - "categories": [ - "physics.plasm-ph", - "cond-mat.mtrl-sci", - "cond-mat.stat-mech", - "physics.atom-ph", - "physics.comp-ph" - ], - "primary_category": "physics.plasm-ph", - "published_date": "2024-05-22T16:44:17Z", - "updated_date": "2024-05-22T16:44:17Z", - "pdf_url": "https://arxiv.org/pdf/2405.13814v1", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2405.13814v1.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Dielectric and energy-storage properties of Ba0.85Ca0.15Zr0.10Ti0.90O3 ceramics with BaO-Na2O-Nb2O5-WO3-P2O5 glass addition", - "authors": [ - "A. Ihyadn", - "S. Merselmiz", - "D. Mezzane", - "L. Bih", - "A. Lahmar", - "A. Alimoussa", - "M. Amjoud", - "Igor A. Luk'yanchuk", - "M. El Marssi" - ], - "abstract": "Lead-free Ba0.85Ca0.15Zr0.10Ti0.90O3 (BCZT) ceramics with different BaO-Na2O-Nb2O5-WO3-P2O5 (BNNWP) glass content, forming (1-x)BCZT-xBNNWP lead-free ceramics (abbreviated as BCZTx; x=0, 2, 4, 6, and 8wt%) were synthesized using the conventional solid-state processing route. The XRD investigation shows the coexistence of tetragonal and orthorhombic phases in BCZT pure. Likewise, only the tetragonal phase was detected in BCZTx (x = 2-8 wt%) ceramics. The SEM findings indicate that the average grain size decreases as the amount of BNNWP glass additives increases. In addition, BCZT ceramics Amodified with glass additions showed narrower hysteresis loops and a large electric field. The BCZT4 showed the highest recovered energy density of 0.52 J/cm3 at 135kV/cm with an energy storage efficiency of 62.4%, which is increased by 6.6 compared to BCZT0 (0.075 J/cm3). The energy density was also calculated using the Landau-Ginzburg-Devonshire (LGD) theory", - "arxiv_id": "2405.13207v1", - "categories": [ - "physics.app-ph", - "cond-mat.mtrl-sci" - ], - "primary_category": "physics.app-ph", - "published_date": "2024-05-21T21:20:10Z", - "updated_date": "2024-05-21T21:20:10Z", - "pdf_url": "https://arxiv.org/pdf/2405.13207v1", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2405.13207v1.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Robust effective ground state in a nonintegrable Floquet quantum circuit", - "authors": [ - "Tatsuhiko N. Ikeda", - "Sho Sugiura", - "Anatoli Polkovnikov" - ], - "abstract": "An external periodic (Floquet) drive is believed to bring any initial state to the featureless infinite temperature state in generic nonintegrable isolated quantum many-body systems in the thermodynamic limit, irrespective of the driving frequency $\\Omega$. However, numerical or analytical evidence either proving or disproving this hypothesis is very limited and the issue has remained unsettled. Here, we study the initial state dependence of Floquet heating in a nonintegrable kicked Ising chain of length up to $L=30$ with an efficient quantum circuit simulator, showing a possible counterexample: The ground state of the effective Floquet Hamiltonian is exceptionally robust against heating, and could stay at finite energy density even after infinitely many Floquet cycles, if the driving period is shorter than a threshold value. This sharp energy localization transition/crossover does not happen for generic excited states. The exceptional robustness of the ground state is interpreted by (i) its isolation in the energy spectrum and (ii) the fact that those states with $L$-independent $\\hbar\\Omega$ energy above the ground state energy of any generic local Hamiltonian, like the approximate Floquet Hamiltonian, are atypical and viewed as a collection of noninteracting quasipartiles. Our finding paves the way for engineering Floquet protocols with finite driving periods realizing long-lived, or possibly even perpetual, Floquet phases by initial state design.", - "arxiv_id": "2311.16217v2", - "categories": [ - "quant-ph", - "cond-mat.mes-hall", - "cond-mat.quant-gas", - "cond-mat.stat-mech", - "cond-mat.str-el" - ], - "primary_category": "quant-ph", - "published_date": "2023-11-27T19:00:00Z", - "updated_date": "2024-05-21T18:51:47Z", - "pdf_url": "https://arxiv.org/pdf/2311.16217v2", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2311.16217v2.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Heterogeneous antiferroelectric ordering in NaNbO3-SrSnO3 ceramics revealed by direct superstructure imaging", - "authors": [ - "Leonardo Oliveira", - "Mao-Hua Zhang", - "Jurij Koruza", - "Raquel Rodiquez-Lamas", - "Can Yildirim", - "Hugh Simons" - ], - "abstract": "NaNbO3-based antiferroelectric materials offer a promising pathway towards greener and more cost-effective energy storage devices. However, their intrinsic structural instabilities often lead to reduced energy density that compromises their performance and longevity. In this brief communication, we demonstrate how Dark-Field X-ray Microscopy, when carried out on the characteristically weak 1/4{843}pc superstructure reflection, can map the antiferroelectric phase and its strain heterogeneity in typically small, deeply-embedded grains of a NaNbO3 and 0.95NaNbO3-0.05SrSnO3 ceramics, representative of different phase transition behavior. Our results clearly evidences the stabilizing effect of SrSnO3 on the antiferroelectric phase by enhancing the degree of mesostructural order. In doing so, our method establishes a new platform for exploring the impact of disorder on the long-range strain heterogeneity within antiferroelectrics and other materials with modulated crystal structures.", - "arxiv_id": "2405.12810v1", - "categories": [ - "cond-mat.mtrl-sci" - ], - "primary_category": "cond-mat.mtrl-sci", - "published_date": "2024-05-21T13:59:54Z", - "updated_date": "2024-05-21T13:59:54Z", - "pdf_url": "https://arxiv.org/pdf/2405.12810v1", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2405.12810v1.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Low-Temperature Transport Property of Spin-1/2 Random Heisenberg Chains", - "authors": [ - "Yuejiu Zhao", - "Long Zhang" - ], - "abstract": "Quenched disorders can strongly influence the physical properties of quantum many-body systems. The real-space strong-disorder renormalization group (SDRG) analysis has shown that the spin-1/2 random Heisenberg chain is controlled by the infinite-randomness fixed point (IRFP) and forms a random singlet (RS) ground state. Motivated by recent thermal transport experiments on the quasi-one-dimensional antiferromagnet copper benzoate [B. Y. Pan et al, Phys. Rev. Lett. {\\bf 129}, 167201 (2022)], we adapt the SDRG to study the low-temperature properties of the random Heisenberg chain by assuming that its low-energy excited states are captured by the parent Hamiltonian of the RS ground state as well. We find that while the specific heat coefficient and the uniform magnetic susceptibility scale as $C/T\\sim T^{-\\alpha_{c}}$ and $\\chi\\sim T^{-\\alpha_{s}}$ with $0<\\alpha_{c,s}<1$, indicating a divergent low-energy density of states, the thermal and the spin conductivities scale as $\\kappa/T\\sim T$ and $\\sigma_{s}\\sim T$, which implies a vanishing density of extended states in the low-energy limit. We believe that such a disparity in the thermodynamic and transport properties is a common feature of random systems controlled by the IRFP.", - "arxiv_id": "2311.15282v2", - "categories": [ - "cond-mat.str-el", - "cond-mat.dis-nn", - "cond-mat.mtrl-sci", - "cond-mat.stat-mech" - ], - "primary_category": "cond-mat.str-el", - "published_date": "2023-11-26T12:49:31Z", - "updated_date": "2024-05-06T06:28:05Z", - "pdf_url": "https://arxiv.org/pdf/2311.15282v2", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2311.15282v2.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Quantitative analysis of the prediction performance of a Convolutional Neural Network evaluating the surface elastic energy of a strained film", - "authors": [ - "Luis Mart\u00edn Encinar", - "Daniele Lanzoni", - "Andrea Fantasia", - "Fabrizio Rovaris", - "Roberto Bergamaschini", - "Francesco Montalenti" - ], - "abstract": "A Deep Learning approach is devised to estimate the elastic energy density $\\rho$ at the free surface of an undulated stressed film. About 190000 arbitrary surface profiles h(x) are randomly generated by Perlin noise and paired with the corresponding elastic energy density profiles $\\rho(x)$, computed by a semi-analytical Green's function approximation, suitable for small-slope morphologies. The resulting dataset and smaller subsets of it are used for the training of a Fully Convolutional Neural Network. The trained models are shown to return quantitative predictions of $\\rho$, not only in terms of convergence of the loss function during training, but also in validation and testing, with better results in the case of the larger dataset. Extensive tests are performed to assess the generalization capability of the Neural Network model when applied to profiles with localized features or assigned geometries not included in the original dataset. Moreover, its possible exploitation on domain sizes beyond the one used in the training is also analyzed in-depth. The conditions providing a one-to-one reproduction of the ground-truth $\\rho(x)$ profiles computed by the Green's approximation are highlighted along with critical cases. The accuracy and robustness of the deep-learned $\\rho(x)$ are further demonstrated in the time-integration of surface evolution problems described by simple partial differential equations of evaporation/condensation and surface diffusion.", - "arxiv_id": "2405.03049v1", - "categories": [ - "physics.comp-ph", - "cond-mat.mtrl-sci" - ], - "primary_category": "physics.comp-ph", - "published_date": "2024-05-05T20:34:16Z", - "updated_date": "2024-05-05T20:34:16Z", - "pdf_url": "https://arxiv.org/pdf/2405.03049v1", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2405.03049v1.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Statistic physics in bound state in 3D fermi gas system", - "authors": [ - "Chen-Huan Wu" - ], - "abstract": "The bound state is treated as a long-lived quasiparticle with slow momenta and current relaxation in fermi liquid phase. In this paper, we discuss the realization of ensemble behavior in a 3D fermi gas system in non-fermi liquid phase. We reveal the relation between UV cutoff of relative momentum $\\Lambda_{q}$ and its ensemble behavior. The behavior of a bound state system has rarely been investigated before, and the relation between the scattering momentum and the physics has not yet been explored before (to best of our knowledge). We found that the cutoff $\\Lambda_{q}$ directly related to the distribution and statistical variance of coupling term, which becomes Gaussian variable (or Chi-square variable) in limit (i.e., with a large step number of a fractional distance $\\Lambda_{q}^{-1}\\rightarrow\\infty$). Also, we show that the different $\\Lambda_{q}^{-1}$ lending support to different phases, including non-fermi liquid phase and (disordered) fermi liquid phase, which correspond to ill-defined and well-defined bound states, respectively. The pair condensation induced by local coupling, which happen at critical temperature, would suppresses the non-fermi liquid for constant on-site coupling (it is not the case when the coupling be variant). % We deduce the free energy density and the divergent behaviors of anomalous propagator in this case. % Finally, we also present a discussion of ensembles of level statistic that depending on which symmetry class the system belongs to, and that can be controlled by the type of disorder. Further, when the range of condensation is larger, the homogeneous character will emerge and the thermalization can be observed where eigenstates with higher energy has lower overlap with the low-entangled states.", - "arxiv_id": "2106.15095v7", - "categories": [ - "cond-mat.str-el", - "cond-mat.dis-nn" - ], - "primary_category": "cond-mat.str-el", - "published_date": "2021-06-29T05:11:53Z", - "updated_date": "2024-05-04T18:58:37Z", - "pdf_url": "https://arxiv.org/pdf/2106.15095v7", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2106.15095v7.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Electron Drag Effect on Thermal Conductivity in Two-dimensional Semiconductors", - "authors": [ - "Yujie Quan", - "Bolin Liao" - ], - "abstract": "Two-dimensional (2D) materials have shown great potential in applications as transistors, where thermal dissipation becomes crucial because of the increasing energy density. Although thermal conductivity of 2D materials has been extensively studied, interactions between nonequilibrium electrons and phonons, which can be strong when high electric fields and heat current coexist, are not considered. In this work, we systematically study the electron drag effect, where nonequilibrium electrons impart momenta to phonons and influence the thermal conductivity, in 2D semiconductors using ab initio simulations. We find that, at room temperature, electron drag can significantly increase thermal conductivity by decreasing phonon-electron scattering in 2D semiconductors, while its impact in three-dimensional (3D) semiconductors is negligible. We attribute this difference to the large electron-phonon scattering phase space and higher contribution to thermal conductivity by drag-active phonons. Our work elucidates the fundamental physics underlying coupled electron-phonon transport in materials of various dimensionalities.", - "arxiv_id": "2405.02257v1", - "categories": [ - "cond-mat.mtrl-sci" - ], - "primary_category": "cond-mat.mtrl-sci", - "published_date": "2024-05-03T17:14:51Z", - "updated_date": "2024-05-03T17:14:51Z", - "pdf_url": "https://arxiv.org/pdf/2405.02257v1", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2405.02257v1.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "The finite-$T$ Lorentz number and the thermal conductivity. Aluminum and carbon conductivities from ambient to millions of degrees Kelvin", - "authors": [ - "M. W. C. Dharma-wardana" - ], - "abstract": "Theoretical prediction of the thermal conductivity $\\kappa$ of metal-like electron-ion systems would be greatly simplified if a convenient generalization of the Lorentz number $L_N$ for arbitrary temperatures ($T$) and densities were available. Such calculations are needed in astrophysics, high-energy-density physics, semiconductor physics as well as in materials science. We present a finite-$T$ form of $L_N(T)$, expressed in terms of elementary Fermi integrals. It is a universal function of $t=T/E_F$, where $E_F$ is the Fermi energy of the electrons. A convenient four-parameter fit to $L_N(t)$ for $t=0-\\infty$ further simplifies the applications. The effect of electron-electron interactions is also briefly discussed. Calculations for $L_N(t)$ and thermal conductivities $\\kappa$ for Al and C are presented at several compressions and into the million-Kelvin range. Experimental isobaric conductivities for Al just above the meting point, and isochoric conductivities for Al and C from available density-functional theory simulations and average-atom calculations are used as comparisons.", - "arxiv_id": "2404.19692v1", - "categories": [ - "cond-mat.mtrl-sci", - "physics.plasm-ph" - ], - "primary_category": "cond-mat.mtrl-sci", - "published_date": "2024-04-30T16:35:09Z", - "updated_date": "2024-04-30T16:35:09Z", - "pdf_url": "https://arxiv.org/pdf/2404.19692v1", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2404.19692v1.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Beyond $N=\\infty$ in Large $N$ Conformal Vector Models at Finite Temperature", - "authors": [ - "Oleksandr Diatlyk", - "Fedor K. Popov", - "Yifan Wang" - ], - "abstract": "We investigate finite-temperature observables in three-dimensional large $N$ critical vector models taking into account the effects suppressed by $1\\over N$. Such subleading contributions are captured by the fluctuations of the Hubbard-Stratonovich auxiliary field which need to be handled with care due to a subtle divergence structure which we clarify. The examples we consider include the scalar $O(N)$ model, the Gross-Neveu model, the Nambu-Jona-Lasinio model and the massless Chern-Simons Quantum Electrodynamics. We present explicit results for the free energy density to the subleading order in $1\\over N$, which captures the thermal one-point function of the stress-energy tensor to this order. We also include the dependence on a chemical potential. We determine the Wilson coefficient in the thermal effective action that is sensitive to global symmetry for the first time directly in interacting CFTs, which produces a symmetry-resolved asymptotic density of states. We further provide a formula from diagrammatics for the one-point functions of general single-trace higher-spin currents. We observe that in most cases considered, these subleading effects lift the apparent degeneracies between observables in different models at infinite $N$, while in special cases the discrepancies only start to appear at the next-to-subleading order.", - "arxiv_id": "2309.02347v2", - "categories": [ - "hep-th", - "cond-mat.str-el" - ], - "primary_category": "hep-th", - "published_date": "2023-09-05T16:03:47Z", - "updated_date": "2024-04-22T21:12:20Z", - "pdf_url": "https://arxiv.org/pdf/2309.02347v2", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2309.02347v2.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Influence of strain and point defects on the electronic structure and related properties of (111)NiO epitaxial films", - "authors": [ - "Bhabani Prasad Sahu", - "Poonam Sharma", - "Santosh Kumar Yadav", - "Alok Shukla", - "Subhabrata Dhar" - ], - "abstract": "(111)NiO epitaxial films are grown on c-sapphire substrates at various growth temperatures ranging from room-temperature to 600C using pulsed laser deposition (PLD) technique. Two series of samples, where different laser fluences are used to ablate the target, are studied here. Films grown with higher laser fluence, are found to be embedded with Ni-clusters crystallographically aligned with the (111)NiO matrix. While the layers grown with lower laser energy density exhibit p-type conductivity specially at low growth temperatures. X-ray diffraction study shows the coexistence of biaxial compressive and tensile hydrostatic strains in these samples, which results in an expansion of the lattice primarily along the growth direction. This effective uniaxial expansion {epsilon}_perpendicular increases with the reduction of the growth temperature. Band gap of these samples is found to decrease linearly with {epsilon}_perpendicular. This result is validated by density functional theory (DFT) calculations. Experimental findings and the theoretical study further indicate that V_Ni + O_I and V_O + Ni_I complexes exist as the dominant native defects in samples grown with Ni-deficient (low laser fluence) and Ni-rich (high laser fluence) conditions, respectively. P-type conductivity observed in the samples grown in Ni-deficient condition is more likely to be resulting from V_Ni + O_I defects than Ni-vacancies (V_Ni).", - "arxiv_id": "2404.13007v1", - "categories": [ - "cond-mat.mtrl-sci" - ], - "primary_category": "cond-mat.mtrl-sci", - "published_date": "2024-04-19T17:09:43Z", - "updated_date": "2024-04-19T17:09:43Z", - "pdf_url": "https://arxiv.org/pdf/2404.13007v1", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2404.13007v1.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Optical and Transport Properties of Plasma Mixtures from Ab Initio Molecular Dynamics", - "authors": [ - "Alexander J. White", - "Galen T. Craven", - "Vidushi Sharma", - "Lee A. Collins" - ], - "abstract": "Predicting the charged particle transport properties of warm dense matter / hot dense plasma mixtures is a challenge for analytical models. High accuracy ab initio methods are more computationally expensive, but can provide critical insight by explicitly simulating mixtures. In this work, we investigate the transport properties and optical response of warm dense carbon-hydrogen mixtures at varying concentrations under either conserved electronic pressure or mass density at a constant temperature. We compare options for mixing the calculated pure species properties to estimate the results of the mixtures. We find that a combination of the Drude model with the Matthiessen's rule works well for DC electron transport and low frequency optical response. This breaks down at higher frequencies, where a volumetric mix of pure-species AC conductivities works better.", - "arxiv_id": "2404.07800v1", - "categories": [ - "physics.plasm-ph", - "cond-mat.mtrl-sci", - "physics.atom-ph", - "physics.comp-ph" - ], - "primary_category": "physics.plasm-ph", - "published_date": "2024-04-11T14:44:01Z", - "updated_date": "2024-04-11T14:44:01Z", - "pdf_url": "https://arxiv.org/pdf/2404.07800v1", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2404.07800v1.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Fluoride Frameworks as Potential Calcium Battery Cathodes", - "authors": [ - "Dereje Bekele Tekliye", - "Gopalakrishnan Sai Gautam" - ], - "abstract": "Calcium batteries (CBs) are potential next-generation energy storage devices, offering a promising alternative to lithium-ion batteries due to their theoretically high energy density, better safety, and lower costs associated with the natural abundance of calcium. However, the limited availability of positive electrode (cathode) materials has constrained the development of CBs so far. Given the similar ionic radii of Na$^+$ and Ca$^{2+}$, structures that are effective at reversibly intercalating Na$^+$ may be able to reversibly intercalate Ca$^{2+}$ as well. In this context, transition metal fluorides (TMFs) exhibiting weberite and perovskite structures that are known for intercalating Na$^+$ form an interesting set of possible CB cathode frameworks. Thus, we use first principles calculations to explore weberite and perovskite TMFs as CB cathodes, of compositions Ca\\textsubscript{x}M\\textsubscript{2}F\\textsubscript{7} and Ca\\textsubscrpt{x}MF\\textsubscript{3}, respectively, where M = Ti, V, Cr, Mn, Fe, Co, or Ni. We systematically evaluate key cathode properties, including ground state structure, average Ca-intercalation voltage, thermodynamic stability (at 0 K), theoretical capacity, and Ca$^{2+}$ migration barriers. Importantly, we identify Ca\\textsubscript{x}Cr\\textsubscript{2}F\\textsubscript{7} and Ca\\textsubscript{x}Mn\\textsubscript{2}F\\textsubscript{7} weberite frameworks as promising Ca-cathodes. Our study not only unveils potential CB cathodes but also paves the way for further advancement in TMF-based intercalation cathodes, diversifying the chemical space for next-generation energy storage systems.", - "arxiv_id": "2404.05820v1", - "categories": [ - "cond-mat.mtrl-sci" - ], - "primary_category": "cond-mat.mtrl-sci", - "published_date": "2024-04-08T18:58:36Z", - "updated_date": "2024-04-08T18:58:36Z", - "pdf_url": "https://arxiv.org/pdf/2404.05820v1", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2404.05820v1.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Spatiotemporal Quenches for Efficient Critical Ground State Preparation in Two-Dimensional Quantum Systems", - "authors": [ - "Simon Bernier", - "Kartiek Agarwal" - ], - "abstract": "Quantum simulators have the potential to shed light on the study of quantum many-body systems and materials, offering unique insights into various quantum phenomena. While adiabatic evolution has been conventionally employed for state preparation, it faces challenges when the system evolves too quickly or the coherence time is limited. In such cases, shortcuts to adiabaticity, such as spatiotemporal quenches, provide a promising alternative. This paper numerically investigates the application of spatiotemporal quenches in the two-dimensional transverse field Ising model with ferromagnetic interactions, focusing on the emergence of the ground state and its correlation properties at criticality when the gap vanishes. We demonstrate the effectiveness of these quenches in rapidly preparing ground states in critical systems. Our simulations reveal the existence of an optimal quench front velocity at the emergent speed of light, leading to minimal excitation energy density and correlation lengths of the order of finite system sizes we can simulate. These findings emphasize the potential of spatiotemporal quenches for efficient ground state preparation in quantum systems, with implications for the exploration of strongly correlated phases and programmable quantum computing.", - "arxiv_id": "2404.02957v1", - "categories": [ - "quant-ph", - "cond-mat.other" - ], - "primary_category": "quant-ph", - "published_date": "2024-04-03T18:00:01Z", - "updated_date": "2024-04-03T18:00:01Z", - "pdf_url": "https://arxiv.org/pdf/2404.02957v1", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2404.02957v1.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Addressing energy density functionals in the language of path-integrals I: Comparative study of diagrammatic techniques applied to the (0+0)-D $O(N)$-symmetric $\\varphi^{4}$-theory", - "authors": [ - "Kilian Fraboulet", - "Jean-Paul Ebran" - ], - "abstract": "The energy density functional (EDF) method is currently the only microscopic theoretical approach able to tackle the entire nuclear chart. Nevertheless, it suffers from limitations resulting from its empirical character and deteriorating its reliability. This paper is part of a larger program that aims at formulating the EDF approach as an effective field theory (EFT) in order to overcome these limitations. A relevant framework to achieve this is the path-integral (PI) formulation of quantum field theory (QFT). The latter indeed provides a wide variety of treatments of the many-body problem well suited to deal with non-perturbative interactions and to exploit a Lagrangian resulting from an EFT as a starting point. While developing the formalism in a general setting, we present a comparative study of such techniques applied to a toy model, i.e. the (0+0)-D $O(N)$-symmetric $\\varphi^{4}$-theory. More specifically, our focus will be on the following diagrammatic techniques: loop expansion (LE), optimized perturbation theory (OPT) and self-consistent perturbation theory (SCPT). With these methods, we notably address the spontaneous breakdown of the $O(N)$ symmetry with care especially since spontaneous symmetry breakings (SSBs) play a paramount role in current implementations of the EDF approach.", - "arxiv_id": "2208.13044v4", - "categories": [ - "nucl-th", - "cond-mat.str-el" - ], - "primary_category": "nucl-th", - "published_date": "2022-08-27T15:59:12Z", - "updated_date": "2024-04-02T18:21:02Z", - "pdf_url": "https://arxiv.org/pdf/2208.13044v4", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2208.13044v4.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Local operator quench induced by two-dimensional inhomogeneous and homogeneous CFT Hamiltonians", - "authors": [ - "Weibo Mao", - "Masahiro Nozaki", - "Kotaro Tamaoka", - "Mao Tian Tan" - ], - "abstract": "We explore non-equilibrium processes in two-dimensional conformal field theories (2d CFTs) due to the growth of operators induced by inhomogeneous and homogeneous Hamiltonians by investigating the time dependence of the partition function, energy density, and entanglement entropy. The non-equilibrium processes considered in this paper are constructed out of the Lorentzian and Euclidean time evolution governed by different Hamiltonians. We explore the effect of the time ordering on entanglement dynamics so that we find that in a free boson CFT and RCFTs, this time ordering does not affect the entanglement entropy, while in the holographic CFTs, it does. Our main finding is that in the holographic CFTs, the non-unitary time evolution induced by the inhomogeneous Hamiltonian can retain the initial state information longer than in the unitary time evolution.", - "arxiv_id": "2403.15851v2", - "categories": [ - "hep-th", - "cond-mat.str-el", - "quant-ph" - ], - "primary_category": "hep-th", - "published_date": "2024-03-23T14:04:38Z", - "updated_date": "2024-04-02T08:34:49Z", - "pdf_url": "https://arxiv.org/pdf/2403.15851v2", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2403.15851v2.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Energy balance and damage for dynamic brittle fracture from a nonlocal formulation", - "authors": [ - "Robert P. Lipton", - "Debdeep Bhattacharya" - ], - "abstract": "A nonlocal model of peridynamic type for dynamic brittle damage is introduced consisting of two phases, one elastic and the other inelastic. Evolution from the elastic to the inelastic phase depends on material strength. Existence and uniqueness of the displacement-failure set pair follow from the initial value problem. The displacement-failure pair satisfies energy balance. The length of nonlocality $\\epsilon$ is taken to be small relative to the domain in $\\mathbb{R}^d$, $d=2,3$. The new nonlocal model delivers a two point strain evolution on a subset of $\\mathbb{R}^d\\times\\mathbb{R}^d$. This evolution provides an energy that interpolates between volume energy corresponding to elastic behavior and surface energy corresponding to failure. In general the deformation energy resulting in material failure over a region $R$ is given by a $d-1$ dimensional integral that is uniformly bounded as $\\epsilon\\rightarrow 0$. For fixed $\\epsilon$, the failure energy is nonzero for $d-1$ dimensional regions $R$ associated with flat crack surfaces. This failure energy is the Griffith fracture energy given by the energy release rate multiplied by area for $d=3$ (or length for $d=2$). The nonlocal field theory is shown to recover a solution of Naiver's equation outside a propagating flat traction free crack in the limit of vanishing spatial nonlocality. Simulations illustrate fracture evolution through generation of an internal traction free boundary as a wake left behind a moving strain concentration. Crack paths are seen to follow a maximal strain energy density criterion.", - "arxiv_id": "2401.01861v4", - "categories": [ - "math.AP", - "cond-mat.mtrl-sci", - "74A45, 74A70, 74B20, 34B10" - ], - "primary_category": "math.AP", - "published_date": "2024-01-03T18:09:17Z", - "updated_date": "2024-04-01T14:47:57Z", - "pdf_url": "https://arxiv.org/pdf/2401.01861v4", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2401.01861v4.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Locality bounds for quantum dynamics at low energy", - "authors": [ - "Andrew Osborne", - "Chao Yin", - "Andrew Lucas" - ], - "abstract": "We discuss the generic slowing down of quantum dynamics in low energy density states of spatially local Hamiltonians. Beginning with quantum walks of a single particle, we prove that for certain classes of Hamiltonians (deformations of lattice-regularized $H\\propto p^{2k}$), the ``butterfly velocity\" of particle motion at low energies has an upper bound that must scale as $E^{(2k-1)/2k}$, as expected from dimensional analysis. We generalize these results to obtain bounds on the typical velocities of particles in many-body systems with repulsive interactions, where for certain families of Hubbard-like models we obtain similar scaling.", - "arxiv_id": "2310.02856v3", - "categories": [ - "math-ph", - "cond-mat.str-el", - "math.MP", - "quant-ph" - ], - "primary_category": "math-ph", - "published_date": "2023-10-04T14:42:51Z", - "updated_date": "2024-03-29T16:47:21Z", - "pdf_url": "https://arxiv.org/pdf/2310.02856v3", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2310.02856v3.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - }, - { - "title": "Heterogeneity in Point Defect Distribution and Mobility in Solid Ion Conductors", - "authors": [ - "Md Salman Rabbi Limon", - "Zeeshan Ahmad" - ], - "abstract": "Alkali metal anodes paired with solid ion conductors offer promising avenues for enhancing battery energy density and safety. To facilitate rapid ion transport crucial for fast charging and discharging, it is essential to understand point defects within these conductors. In this study, we investigate the heterogeneity of defect distribution in Li$_3$OCl solid ion conductor, quantifying the defect formation energy (DFE) of lithium vacancies and interstitials as a function of distance from the surface through first-principles simulations. Our results reveal that the surface DFE is consistently lower than bulk except for one surface termination, indicating significant defect aggregation at surfaces. This difference can cause the defect density to be up to 14 orders of magnitude higher at surfaces compared to the bulk. Moreover, we unveil the transition in DFE when moving from the surface to the bulk through the DFE function, which exhibits an exponentially decaying relationship. Incorporating this exponential trend, we develop a revised model for the average behavior of defects that offers a more accurate description of the influence of grain size. Surface effects dominate for grain sizes $\\lesssim$ 1 $\\mu$m, highlighting the importance of surface defect engineering and the DFE function for accurately capturing ion transport in devices. We further explore the kinetics of defect redistribution by calculating the migration barriers for defect movement between bulk and surfaces. We find a highly asymmetric energy landscape for the lithium vacancies, exhibiting lower migration barriers for movement towards the surface compared to the bulk, while interstitial defects exhibit comparable kinetics between surface and bulk regions. These insights underscore the importance of considering both thermodynamic and kinetic factors in the design of solid ion conductors.", - "arxiv_id": "2312.17534v2", - "categories": [ - "cond-mat.mtrl-sci", - "physics.chem-ph" - ], - "primary_category": "cond-mat.mtrl-sci", - "published_date": "2023-12-29T09:32:03Z", - "updated_date": "2024-03-28T17:54:45Z", - "pdf_url": "https://arxiv.org/pdf/2312.17534v2", - "local_pdf_path": "data\\arxiv\\pdfs\\materials\\2312.17534v2.pdf", - "comment": "", - "journal_ref": "", - "doi": "" - } -] \ No newline at end of file +version https://git-lfs.github.com/spec/v1 +oid sha256:327a7cbf0af24df5ead0993396fd6fd8c7162abc9f7590059458b2ef26310226 +size 209717