Requires you to close your doors into it. I have an older car (Toyota Solara), and wanted this to protect it from the times I can't park in the garage. I've used another cover previously however it has gotten worn down from seasons so I wanted to give this one a try.The good news is that the clips are plastic, which I LOVE. The old cover I used had metal clips, and if one isn't fastened properly, that'll scratch up the car in the wind as it shakes around. I prefer plastic or rubberized clips any day.The bad news, is that they want me to close the doors into this in order to hold it in place. I did not realize that is how it is supposed to work, and I have a major problem with that- The Solara doors don't have a top frame, it is glass against the rubber gasket of the car's top. With material in between like this, you are asking for leaks into the interior of the car around the door seams. I don't like that at all. It fits fine on my other car (Honda Odyssey) but I'm disappointed I can't use it on the car I wanted to.


Like the semi transparent ones better ---- Fits Acura Sedan & similar model -- Read review. I ordered these sun shades during Amazon prime day, but since it is winter time I didn't use them. Well, I recently got some moles and freckles removed from my face, so I am in complete vampire mode. That means I apply globs of sunscreen on face and hiss at the sight of sunlight, that is ......... until my skin heals.Yesterday, I pulled out these shades, happy that there was a dark option to help me stay in vampire mode, but both of the dark shades would not stick to my window. Only the two transparent ones worked. The transparent one is ok, but not nearly enough shade for those who need to be out of the sun. The darker ones are much better.  In fact, I would rather have bought 4 semi transparent ones instead of 2 transparent and 2 semi transparent.I guess I received a defective batch, but I still give them 5 stars because I sent them a message explaining the above situation, and they promptly responded stating they stand by their products and will ship me 2 working ones. 5 stars for the amazing customer service. I wish all companies were like them. Anyway, don't be like me and use this a month later. Check to make sure all shades work right when you receive them.Hope my review helps!

You are a professional English-to-Russian translator. Your goal is to accurately convey the meaning and nuances of the original English text while adhering to Russian grammar, vocabulary, and cultural sensitivities. Produce only the Russian translation, without any additional explanations or commentary. Translate the following text:


Great value for a cheap starter kit! This is the first time I've tried to pull dents out of anything but I have seen it done several times. So that being said, I think this is a very cheaply made kit, it's not meant for professionals at all. It is a good beginner-starter kit though. I used it on my clothes dryer where "someone" stepped on the lid and left a large dent. I used up an entire stick of black glue. I had better luck applying glue to the dryer lid first. When I applied it to the puller tab first it would stay stuck on the dryer which made the whole process much harder.  There's no replacement for experience though. The puller contraption itself is easy to use but made of very cheap metal so I'm not sure how long it will last. The glue gun works, but it heats up pretty slow. Cleaning up the glue that didn't come off the metal was a huge pain. Like I said before that can be prevented some by applying the glue to the metal surface first instead of the pull tabs. I did not get the dent completely pulled out but it does look a lot better. I just wanted to try it out on something besides a car first. I didn't need the little pry tools for anything yet, but I do a lot of car projects so I'm sure they will come in handy eventually.


Great tissue holder! I really like these tissue holders!  I put one on each of my family's drivers side visor.  I DO think that it should come with at least two of this manufacturers small tissue packets though.  It would not cost that much more to include them with the tissue holders.  I DID end up purchasing refill tissues to fill up these holders.  I AM VERY PUZZLED as to why this company does NOT make these tissue holders the 'standard' size of tissues!  What I did do, is I took a stack of regular sized tissues and I cut them to fit these holders.  That works and cutting regular size tissues will save me money in the future when I need to refill my tissue holders!  I am glad that I purchased these holders, as these holders will prevent us from searching for our tissue boxes that we normally have in the back seat.  That task can be distracting at times, and that is not good when you're driving!


Better than expected. I used this as a junction box on my utility trailer. My trailer doesn't have brakes so I didn't need all the lugs but I wanted a box like this to use in wiring the trailer and didn't find anything like it for a four wire setup so I went ahead and got this one and I'm glad I did. I did add a rubber gasket and I sealed around the wires with silicone RTV where I brought them into the wiring box through the rubber plugs that came with the box.The box itself is pretty stout but the strain relief clamps on the ends of the box could definitely stand some beefing up. It would be a better product if the side enty ports also had strain reliefs.In spite of its shortcomings, I like this box well enough that I bought another one which I intend to use when I rewire another trailer of mine next summer.


Auto headrest tablet and hat holder that works OK with an additional installation step. I had a bit of trouble installing this. Rotating the knob behind the tablet holder is not as easy as they make it sound in the instructions. I couldn't get it tight enough to keep my 11" iPad Pro from drooping, so I thought I had it cross threaded. Through my efforts to tighten it by hand, I broke the knob. I glued and tried again the next day, but this time I used a pipe wrench to grip the knob while hand turning the tablet holder, which worked well enough so that now the tablet does not droop so easily. It's probably best for use with cellphones or lighter tablets.I love the hat holder feature. I keep large brim hats in the van to protect against the sun when going out for walks. Before I installed this holder, I was constantly moving the hats around in the van because I didn't have a good permanent place for them. As seen in the photo, I have two hats in the hat holder, the one in the back is hanging by it's chin strap.I wish I could use the nicely collapsible tray AND the hat holder but one is forced to choose between them.Now that it's installed and working, I'm happy to have this auto tablet and hat holder.


Bought 2, here’s my opinion. So I bought two when it was on sale for $18 each. I bought one as a gift and one for myself. I asked the other person how it was and he said it worked great. I had mine in my car for over 6 months and I just used it last week. I noticed the low air indicator light was on so I plugged it into my car. I noticed it has three different setting of pressure. I put it on psi and it showed that it was low. I let it run till it got to my cars psi recommended level and turned it off. There is only one caveat, I’m not sure how accurate it is. I also had a handheld pressure tester and it was old and it showed a different number. When I got into the car and drove for a little the tire indicator was off. So in essence it did its job. And well worth the investment.


Comfortable but not slippery, cute steering wheel cover. This is my first time having a steering wheel cover. I have a 1st Generation Toyota Sienna. I measured my steering wheel and it was close to 15", so I figured this would work. It was a bit of a struggle getting it on but not too bad, I didn't need any help or tools. I do wish I would have given more thought to where the seam on the cover would be, because I didn't and it ended up being on the right toward the bottom which isn't as bad as if it were closer to the top, but I think I would prefer if it were in the middle at the bottom as a clear point of reference. It's a pretty thick seam. I don't want to have to remove the cover and put it back on though, it was a tight fit. I chose this Bohemian design because I think it goes pretty well with my old and ugly brown interior. The cover does make the steering wheel quite thick, which, I guess, is easier to hold onto. The fabric has a tooth to keep my hands from slipping, but it still feels pleasant to the touch. I'm picky about how fabrics feel on my skin, and this feels pretty good.


Don’t waste your time or money. I have a 6 year old German Shepherd that was going on a 1k mile road trip with me. I wanted her to be more comfortable while strapped into a safety harness in the backseat of my GMC Terrain. I ended up purchasing this 1 piece grey inflatable seat extender in a bind because a different product I ordered had been delayed and wouldn’t arrive in time. I read the reviews and knew I was taking a chance.Product inflated easily using a shop vac. It fit very well and I was able to adjust seat position and seat back easily.The outside temp was around 28° F so I left it inside the house after checking the fit thinking I would pop it in place before hitting the road.In a 70° F room it completely deflated in under an hour. I checked the plug, reinflated it and again it was completely deflated in under an hour. I decided to give it one more chance; fully inflating it and checked it for leaks in the bathtub. I could not find a single location where air was escaping. No air bubbles at any seams or the plug.I ended up putting empty cardboard boxes in the floorboard instead of using this product.Don’t buy it. It’s not worth the high chance that it will be defective.


What a relief! I didn’t know that such a device existed, however, I will now share my new discovery with friends! For many years I found myself constantly readjusting my seatbelt while driving. I added a pad to the belt hoping it would project my neck from the rubbing seatbelt. It only reduced my discomfort slightly.This product appeared as I was looking for something to help me install a dog booster seat in my car. It was a spontaneous purchase. While I’ve only used the device for two days, I am pleasantly surprised by the comfort it provides. The seatbelt now feels like a good, personalized fit for me and my atypical body.I marked down the “ease of use” because I am still trying to figure out how to keep the device on the seatbelt when I leave the car. The belt doesn’t fully retract when I leave the device on the belt. My hunch is that I need to develop a new habit of consciously tucking the belt beside the seat as I’m leaving the car so I don’t shut the door on the belt.My biggest regret is that I didn’t discover this device years ago when I was doing more cross-country road trips!


Gear for Motorcycle front sprocket. I used this sprocket JT1264.17 17-tooth to swap out the front sprocket gearing of my Lifan Xpect 200cc motorcycle.  There are videos on how to do it on youtube. It's a very well-made sprocket and heavy-duty. After removing the sprocket cover and loosening the back wheel and chain I was able to take the stock 15-tooth sprocket (JT1264.15) out and install this 17-tooth with little issue.  The sprocket cover needed a little wiggling to get back on over the larger sprocket, but it worked. The result: This was a test I conducted as my own gear ratio experiment. Please consult for advice, from a mechanic professional, the manual, and the service dealer before doing this experiment. What did I gain? I was able to extend lower gears out longer and gained a comfortable (less RPM) 5th-gear speed riding the paved highway.  What did I lose by doing this swap?  I lost lower gear torque to the rear wheel.  I don't want to lose lower-gear torque. I am going to ride the bike on dirt roads and ATV trails where I need lower-gear torque for many purposes.  I won't keep the 17-tooth front sprocket in the motorcycle.  The 17-tooth sprocket looks very well made.  No manufacturing imperfections.  If you have a purpose for this front sprocket this looks like a good one to buy.  I am a DIYer.  Please consult your dealer service department for professional advice.


Do not overtighten the bolts. I bought this about a year and a half ago based on the features and reviews.  I don't run a windshield on my cruiser, so my phone gets hit with direct wind when I ride.  I have gone 75+ mph with no trouble at all and no concern that my phone would come loose.  I do occasionally have to re-tighten the knob, which shouldn't happen but isn't a big deal.I only rated it 4 stars (debated about 3) because I had to remove it today and the aluminum mount snapped in half next to one of the bolts when I was attempting to reinstall it.  I didn't think I had cranked on it too hard, but maybe I have some of the blame.  I'm just glad it didn't break while I was riding.  I just bought another one, so that should say something about the quality.  I will be more careful not to overtighten the bolts when I install the new one and see what happens.


Awesome oil. I for years I used to use only the Subaru synthetic oil in my 2018 forester. After reading reviews and friends telling me about this oil I tried it out.It is a little more expensive that the Subaru oil but I wanted to try it and I was willing to pay the price 1x. So for a little background my forester with clean oem oil was getting 14-15mpg city and my oil temp was 210F. When I used the royal purple I immediately noticed that the engine was running smoother and I was now getting 20-21mpg city and the oil temp was at 190F.This oil definitely paid for itself through the savings at the pump and the smoothness of the engine. I took the averages on both oils after I put 1000mi on.I will update if there’s any changes. On a side note it does say it’s a once a year oil but that’s only if you drive freeway. I drive stop and go in the city so I still plan to change it out in 5 months. I’m also going to put it in our HRV.Thanks royal purple!!


DIY, Save the mony. The detailer's wanted $1300. I watched 15 different YouTube Videos then decided on Adams. I do have a Quick Jack which made it a bit easier with the car lifted. It was easier than I thought ( I did do my homework). I took my time, started in a less noticeable spot and off to the races. I did have another advantage the car was freshly painted, I waited 3 weeks for the paint to gas off and I was done in 4 hours. It is a Miata MX5 a bit smaller than most cars. I left it in the garage for 24 hours before driving it. The first wash left beads of water and I dried the car with a 550 CFM leaf blower. Didn't even need a towel. I save me some big bucks and felt really good doing it myself.


Great item for the money fixed up my oil leak! I purchased this and was concerned about the low price.  I cleaned it out thoroughly looking for debri before proceeding with install and found none.From reading other "cheap" replacement oil filter housing reviews most folks advocated for replacing the oil and temp sending unit.  The last thing I want to do is strip the engine down as far as I did for one of those.  I went ahead and bought auto part store senders and replaced what was on here.  It may have worked fine I just didnt want to dig back in to the engine for them.You have to take off the upper and lower initakes to get to this.  I found over a quart of oil sitting on top of the engine that I had to clean out.  Once replaced and everything re-installed I am happy to report that I have used my inspecting camera and a simple "dip stick" to try to find oil under the intake and it has come back clean.  I put this in before Christmas so as of this review over a month and so far so good.Very happy that my oil leak is finally solved!


Not anti-kink hose. I've had this hose for over 4 years now and have used it many times in the travel trailer.  I also have the 10' version to use when the trailer is much closer to the water outlet at campgrounds.  I wish I could use the 10 footer all the time, but many times I need to get the 25' hose out, which drives me nuts.  It's a real pain to put back in the storage bin if it's slightly cold out as it won't coil up neatly and I have to fling it all around to get it to curve correctly so it goes in the bin.  It has several kinks in it that won't go away.  So, yeah, not anti-kink in my opinion and it's been that way ever since I got it.  (Didn't realize I hadn't reviewed it until I was searching my orders for another hose I purchased a few years ago.)  I'm about ready to toss it as I just ordered another 10 footer and will connect the two together when I need to.  The good thing about the hose - knock wood, it's never leaked or split in the years of periodic usage.  But, yeah, anti-kink is a lie.  Can't really address the hooking issue as I have it hooked to a Hose-Grip from J Wright Concepts, which is wonderful and a device every camper needs!


Not gold and not absorbant. These are really soft and fluffy microfiber towels!  I've never seen microfiber towels like these.  I got them because I have a new color theme in my bathroom that includes a bright egg yolk yellow.  I was trying to liven it up from the grey, beige, black and white in there.  I bought a new rug, new bath towels and a couple pictures to hang on the wall.  I wanted these to wipe off the faucet handle and tub spout after I take showers.  We have a new home and I want to keep it looking new as long as possible. These microfiber towels are labeled as gold and look more yellow in the description than what I recieved.  Mine are bright orange, not gold at all.  But what I don't understand is why they are considered absorbant...?  They smear around the water on the faucet.  I thought maybe I didn't get all the stuff out they use when they are manufactured so I hand washed them again in fragrance free detergent, and baking soda.  Tried again and they still don't wipe off water like my old cotton towels.  I tried them several times.  I think they might be good at dusting.  They probably pick up dust well.  They probably also work great at washing things, but I specifically ordered them for their color and their absorbancy and neither work for that purpose.  I will find another use for them, but I am disappointed.


Bought 3. 1 worked. 1 won't turn on. 1 wouldn't even charge my phone and won't recharge. Seriously. I was pretty excited to find something my wife and kids could just carry in their car that would jump start it in an emergency. So I bought 3 of them. When I got them I pulled them all out of their boxes and checked the charge. The first one was 3 of 5 bars so I plugged it into a usb charger overnight. Next day I tested it out on my RV with a V10 Ford engine that had a very weak battery and it cranked like the battery was new and started right up. Still at 5 of 5 bars.I checked the second one and it was at 5 of 5 bars. I plugged my phone into it and it took my phone to 65% over about 3 hours, and then it was at 1 of 5 bars. I plugged it into the same USB charger I had the other one in and came back a few hours later and it was still at 1 bar. I let it charge overnight and it's still at 1 bar. Flashlight won't turn on and won't start anything.I checked the third one and nothing. No bars of 5. Flashlight won't come on. I plugged it into the charger for a few hours and nothing. No bars, no flashlight.


Really hoped to love it. Install slightly difficult. I have a 2014 Nissan Sentra SR and this is not my first time replacing a cabin air filter. I was really hoping to love this product due to the longer life and activated carbon, but I'm hesitant to purchase another one.I may have received a defective filter, but the filter I received was not easy to install. I had to really force and maneuver it in the filter compartment. I struggled with it so much that I accidentally ripped the little tag that is supposed to help pull the filter back out later. Hopefully I won't have too much trouble taking it out when it's time to replace it again. I haven't decided if I plan to purchase this again when it is time for another replacement. If I do I will update my review on whether or not the 2nd one was just as difficult. For time comparison.... It took me half the time, if not less, to replace my engine air filter and air intake hose than the cabin air filter.


Yes, but... Hey, they're great & easy to install. I have noticed that the driver seat one moves around a bit, especially when I am leaving the seat & settling in to the seat. I believe I may not have installed them correctly, but not sure. I can't find the packaging it came in, unfortunately, so I don't know what to do about that. I noticed there was a strap on the bottom, not sure what that's for. Also a zipper for headrest adjustment, I suppose? Anyway, overall I love the seat covers; I just felt like I couldn't get the driver side to fit like the passenger side.


It will jam up, and break. So. I bought this specifically for the claimed 5 ton power. I wanted the overkill.  My 4500 lb sub got a we stuck in some wet mud. It's awd so it's horrible in that environment. After the heavy rain. The ground got really soft and I sunk while driving on my grass. I thought, ok I'll get this to save hundreds for a tow... Fast forward. I hooked it up  so I read the terrible instructions since it's a double hook. Watched some YouTube videos. Got it going.. Click click. After a couple feet. It made a weird sound and kicked back a few inches. I inspected everything... Couldn't see anything crazy, but now it's really hard to crank, and stuff in both directions.... I thought. Ok maybe it's just the tension...? But no I still had a good length to go before I had to release and start over. And as I was cranking the lever, snap!!* The cable broke and the comealong hit my leg.So. Long story short, DON'T BUY THIS POS ..


great buy. this was a good purchase. i covered my car and got about 4-5 inches of snow in upstate NY. i used my joe snow brush and the snow fell off effortlessly. and then i uncovered my car and it was clean and ready to go. it was about 34 degrees out and i didnt need to heat the car up before i pulled off. this is great and i cant wait for it to snow harder (yes i can) so that i can put this baby to work. the only downside is after storage. it was still wet and i didnt have a practical place to store it, im in an apartment. i balled it up and threw it in my room. its not saturated but was still wet enough that i wish i has somewhere to hang it. it does come with a bag to hold, once dry its a great addition. overall happy with it. and it fit my mercedes cla perfect and came with a lock but i didn’t need it since i just use it for overnight snow falls.


Hard to say if it's the car or me or this part. I ordered this to replace the crankshaft position sensor in my 2011 Nissan Sentra. It was throwing a code for a multiple/random misfire and I replaced the plugs and all of the coil packs so this was next on the list. After I replaced the sensor I am getting lights on the dash and even more codes then before I replaced it (basically it made it worse). I don't know if it's the sensor, the way I replaced it, or anything of that nature because I am not a professional mechanic, which is why I'm giving it a 'neutral' review. The sensor was definitely brand new and looked fine before installation so I can't 100% say it's faulty right now. After I get everything worked out I will probably update this review.


Amazing bags really. So I actually already owned a set very similar to these That I paid much much for and of course it was at the local Harley store and I mean I guess I never had any complaints about them or anything they did the job but my brother ended up accidentally taking my side on a very long trip which kind of put me in a pinch so I decided I would just order the cheaper ones thinking I’m sure they’re good enough for at least one ride boy was I wrong I had a completely backwards as my first, but I was a rip off and this was the holy Grail. These bags were formed so much better material was better. The straps are even heavier duty I mean literally everything about them were better and I could literally buy five Saturdays versus the ones that I bought there . I can’t recommend is enough.


Handy multi-device car charger with useful voltmeter. I don't currently have any auto devices that need their own power port so the best thing about this charger for me currently is the voltmeter so I can always know the condition of my battery. I am hoping to get a dash cam soon though so perhaps that will need the extra power port. I like this charger a lot but it fits a bit too snugly in my van's power port, when putting it in and removing it I worry I could damage my van's power port. My first generation Toyota Sienna may have a slightly smaller power port than usual because I had that problem with another charger, I also read about another Toyota RAV4 owner with the same problem. If it weren't for the tight fit I would probably use this as my main charger so I could always know the condition of my battery. Another odd thing, but not a big issue is that since my port is low, when I insert the charger so that I read the port labels right side up, I am forced to see the fine print on what I consider the bottom of the charger, maybe that's a good thing in some situations. I like the soft touch on off switch.


Bought for dog chew toy. I have a Australian Cattle Dog AKA "Blue Healer" puppy we got a couple months ago. He will shred through any dollar store toy you give him in a matter of days and I had read another person's review with the same kind of dog that he gave his dog a broken Diaphragm and the dog has been chewing it for over 10 years so for $8 bucks I think it was when I bought it, I said what the heck.Got the thing in the mail and the first thing I noticed was that it gets stuck because of the shape of it if lands with the round part up instead of landing like a dish shape with the edge accessible so I cut it in half and gave half of it to my Father In Law for his dog. So far they both love them and even after ripping and shredding at it, my healer hasn't even scratched it now after weeks of use and seems to really like it I assume because it's similar feeling to flesh. Anyway for the price and what I bought it for it's a great deal. Not sure how it'd be for it's designated use since I have nothing to test it for in that regard but it is heavy duty so I would imagine it would work well for that as well.


Work great. Good quality. I switched my trailer axle from a 7500 lb to a 2000 lb axle. I just don't need that big of one way overdone. I went to a couple local places to try to get the u-bolts in the plates but just couldn't find the right size.These are for inch and 3/4 round axle. I think I'm going to need to replace the leaf springs because there's four leaf springs. I need a little softer ride. The trailer is only going to be maybe 1500 lb so I need to switch out those as well.But what I'm getting at for the leaf springs is it fit around four leaf springs and the axle?. After I cranked and tighten the bolts, the bolts are nylon. No washers. But the fact that I have four leaf springs. The bolts barely make it through the nut. Just kind of flush with the top so once I replace the springs I should have a little bit more thread on top of the bolt. I think it would be fine even with three leaf springs.As for quality, definitely quality product, the u-bolts the plates, the nuts, even the coupler that goes between the shock leaf and the axle high quality. I definitely recommend it but it again it is for a inch and 3/4 axle or the 2000 lb load?.If this fits your axle, it's a good product. Get it.


Overpriced. 1. The printed directions were horrible and the installation wasn't easy.2. I don't see how the cord you pull to open up each segment of the cover will last. For the price of this, there should have been something better and stronger that will hold up to constant use. I don't even know if and how this cord can be replaced if it has to be.3. I used it entirely open yesterday for the first time since installation and I knew it would block the entire window. What I didn't count on was the rods not staying in place. I know I tightened each opening for the rods before driving off. Plus, the part that you put the rod in when it isn't used, came off and it shouldn't have.The weather stripping doesn't stay put so I don't know how good this will be in keeping my bed dry when it rains.I was deciding between this cover and the Lomax and I wish I would have chosen the Lomax even though it was more expensive. This cover is overpriced and expensive. I don't think it's worth it and now I'm stuck with it unless I try to sell it myself.


Just what I was looking for just in case. I was looking for a tire jack for when I travel in my 15,000 lbs fifth wheel but didn’t want a bottle jack due to weight and the possibility of damage to axle if placed wrong. Then I found the Rapid Jack!  It’s light weight, looks like it is easy to use, withstands up to 30,000 lbs, everything I wanted. I haven’t had to use it yet but will make sure I’ve tried it  before my next trip. It looks pretty straight forward though. I think this was an excellent buy and an excellent price. When I had first started to look for one around Christmas time the cost was doubled than what it currently is so I think this was a heck of a deal and I’m glad I waited to purchase this. I highly recommend this item to anyone that travels with a multiple axle trailer.


It’s a pretty decent tray. First off the tray, does not come with any instructions, so I had to assume how to place it on the steering wheel, which is somewhat obvious sorta. It is a zip up case that you could probably use to transport papers or something like that because of the handle on the outside, and the fact that it zips up. So it is extremely portable. The outside pocket is actually the part that goes over the steering wheel. It wasn’t until later on that I realized that the straps on the inside actually go together to hold it up in place. It’s not a hard surface and it is bendable. But I do prefer it over the other one that I had simply because the other one that I have is hard and it is not fold up , so I just pretty much slid it between the seat of the door when I wasn’t using it. So I took off stars due to not having instructions and not really knowing where that extra strap goes and the fact that the bottom part is somewhat bendable. I’m not saying that it’s flimsy or won’t hold up but then again, I really don’t know because I haven’t been using it for a long time. I only used it for a few minutes to enter some information on my computer.


Works great, so far. It’s very sturdy and seems well-made but I can’t speak to the adhesion, yet.  I bought this during the winter and I prefer to wait until it’s warmer so I can clean the garage floor and use the adhesive stickers for exactly where I want it.Currently I have it on an old area rug so it doesn’t slide around.  I really like how I can feel the slight elevation in the front so I know it’s close then I feel the higher back which signals me to stop.  I don’t have to guess at all; it’s like my tire fits into a perfect little trough.  I have about 3 inches between the front of my vehicle and the garage wall and maybe another 3 inches of space in the back so my garage door will close.  This device works great and saves me from guessing or getting out of my vehicle and checking clearance.  If I had one suggestion it would be that it should be a little wider but I’ve gotten use to it


It worked great till it didn't. I have to say I don't have any complaints about this unit, except for the tire inflator. My first one I received wouldn't hold a charge and was sent back. The new one was perfect. I have had it for exactly 2 years. The only problem I ran into is that I have only used the inflator maybe 6 times. I pumped up a basket ball, my sons bike tires a few times, and my two front tires. Unfortunately in putting air into my tires it stopped (main reason for buying). I pumped one tire, let it rest, and started the other one. After about a minute, the compressor was running, but no air was going into the tire. It just stopped, not to sure what happened. This unit is still like brand new, and has been well kept. Everything else still works, and I can use it as an alternate power source. I am not happy that it doesn't inflate anymore, but I can still find uses for it as another power source. So there is that.


They went back ,before I used them. Looks like they wound be ok . I thought they where a size larger suction cups. I’m sure it was fine . I just sent them. Back I gave them 4 stars because no problem returning unused, I might buy them again . I can’t find a better product for that price point . I found my original ones from a different company ( they where 2 x  as much . So the price is great ( I can’t honestly tell you how good they are due to the fact I found my old ones that have been great . I use mine 4 times a year had them 10 years and those looked almost as strong, little smaller cups but keep them clean and out of the sun they should last if the same material. Great price point they are 50 70 usd in the states at most boat stores . I’m sure if these are usa made they will do the job well. Good feel ( they have good room to hitch a rope though. I will buy them. If mine go out .  And give you a better review.


Water tastes great! I love this filter! I’m new to RVing and I noticed all the neighbors have this on their water supply so I researched it and I knew I needed one! I immediately noticed the chlorine smell was gone. I use bottled water but I occasionally run out and I hated using tap water because of the toxins it contains. I also worried about giving it to my dogs to drink. The installation was a breeze but there were no instructions that mentioned the black water that comes out at first. I was alarmed but I found their website and read that it’s carbon from the filter and it isn’t harmful. I made my first pot of coffee this morning (without my regular dread) and it was far better than regular tap water! The only thing that I don’t like is that it leaked from the water source. It comes with a rubber ring but it didn’t work for me. Luckily I had others on hand and now it doesn’t leak. Best purchase I’ve made in a very long time!


Brilliant self tightening design. I bought these chains to "keep in the truck" so I would be legal. Didn't think I would need them with 4x4 and snow tires. Sure enough, ended up in a blizzard leaving Yosemite national park while towing a trailer. Roads got really bad, really quick.  I pulled these out and was pleased with how easily they went on. Basically there's a notch for where your tire meets the ground, so you just slip it around. No pulling forward or backwards.  The chains weren't perfectly centered when I put them on, so I just drove 100 yards down the road and rechecked them. Sure enough, they have self centered and the tightening mechanism had taken up the slack on its own.  They stayed nice and tight and didn't slap around as we drove. Removal was ALMOST as easy as installing.  I was genuinely impressed.  I will be more likely to slap these on early when conditions deteriorate now that I know how easy they are. I will be buying a set for any car I own in the future.


Had a horrific allergic reaction - swollen eyes, teary… Is this even FDA approved?? I had a terrible allergic reaction to this product - and I even wore gloves the whole time I was handling it! My eyes were so swollen I debated going to the ER but I decided to take some Benadryl and wait it out (after I tossed the cleaning gel in the trash!) I was feeling better the next morning, thankfully, but the ordeal made me realize that I have no idea what is in this stuff or if any of it is toxic. It reminded me of the slime my daughter used to make in elementary school (if not identical.) Some of those recipes use Borax, which is indeed toxic, so perhaps that is what I reacted to… It did a great job cleaning some used camera gear I was prepping to trade in though, I have to say… Next time though, I will look up a recipe for nontoxic slime instead.


I would describe the fram brand as barely adequate, if that. The build quality feels just really cheap. Everything about it is cut rate. That's probably why it's priced right around $4 right now. I don't know about all the people that say it's destroyed their engines and whatnot. I guess that would happen if pieces came off at and it came apart in some way and started to clog up the oil passages. But from what I've seen no one's ever been able to prove that that has happened. Now that's not to say it hasn't happened I just don't have the time to do extensive research. But everything about these is just cheap. I have no idea how well they filter. For a few dollars more you can get something that feels really good quality. So I decided not to use cheap oil filters anymore and so I find these unacceptable. Like I say I'm not going to make claims that they ruin engines because I have no idea. I know the nickname for these is orange can of death. It's pretty funny but I haven't seen that to be really true at all like I said above I haven't seen proof about it. Anyway yeah I'm just not going to use filters this cheap and low quality.


Everyone should have one of these. I went out Christmas Eve (Subzero temps outside) to go to my bother's house and my car didn't start. Fortunately I was home and my neighbor was able to help me. I realized that I didn't want to depend on someone else to keep my car running  so I ordered this. The day after I got this I went out again (now much warmer) and my car wouldn't start again.  I hooked this up, turned it on and my car started right up. It was easy to use and its great peace of mind to know I'm safe if this happens when I am out and about. This is something everyone needs in their car but especially women.  My only "complaint"  is I wish the cables were just a few inches longer. This would make the hook up a little easier.  I have tried several other brands that had good ratings and they didn't work.  This one is great!


QUALITY PRODUCT--Great O-Ring seal. I needed a new plug and/or O-rings for my Generac 4000xl Generator. I thought they would fit for most products that have a nickel sized yellow oil cap.  I used one of the o-rings for my oil cap, wonderful seal, .I did receive one used dipstick. I had no concerns because for my application, you are to add oil, until it spills out, not monitor its position. I broke the dipstick off the one to have an instant cap ready and may try the others for the oil levels. I could have messaged and sent it back, and I would have if I was using the dipstick part, because it may be hard to see a level. I wanted to use it today, so I did not even write, nor ask for a single one. For anyone, if that is an issue, with 3 to work with, I think they would be ok helping you. (I can not vouch for that for sure.


Stay away unless you are short. I loved the way the windshield looked on my 2020 rebel 500 but, when I went above 50 mph the wind hitting my helmet made it vibrate so bad that it blurred my vision and gave me a headache. I tried different riding positions but nothing worked unless I stayed ducked down. I am only 5’8” so I’m not that tall to begin with. I tried to return the windshield and they declined the return stating that since I used the windshield they wouldn’t accept it back. I only had the windshield attached for one week So buyer Beware. If I was only riding in town and never over 50 mph then I would recommend it but since I am more of a daily driver going 40 miles one way and the average speed is 60 mph there is no way I would recommend this windshield to anyone. Plus I would not recommend this seller for any purchase since it looks like they will find any excuse to not refund. This is my two cents on this product so take it or leave it.


One glaring issue for my instance. I really like this. My only issue that I ran into was corrosion on the battery whip side. They do not have any sort of protective heat shrinking where the wire is crimped to the metal connector. I mounted my quick connect to the front diver side of the bumper of my truck this past June and it corroded this winter. I live in Western NY where road salt was certainly a factor. I bought loom to encase the wires and taped it but, never looked at the original wires at the connection point. Luckily, I had enough extra wire that I was able to cut off the corroded wire and I soldered new connections, put dielectric grease on the area where the wires were reconnected and then used heat shrink over the section where the new connection was made. I hope this review helps anyone who buys this. I would buy this again, I would just make sure I used the grease and the heat shrink before I installed it.


Great console organizer! Even better with a few modifications! I got the one without the coin holder and USB ports! I did this for several reasons:1. I want to use a rapid charger for my phone2. I've read reviews about the coin holder being a knuckle buster when putting the car in park3. The USB ports could break later on meaning you'd need to replace the entire unit4. Better utilization of space to not have the USB ports taking up space in an already small compartment.So i made a few modifications to an already great console organizer. I used my dremel to cut a square in the top to allow the console light to enter the top compartment. I also cut 2 holes in the back of the organizer to allow me to run my apple charger through any compartment that I wanted. I chose the small upper right corner for my ear pod charger. Check out the photos.The unit fits tight and snug like a glove. I really don't have any complaints about this unit although it would have been better if it already came with the modifications that I did. Overall I'll give it 5 stars and I would highly recommend it!


Didn't Work !!! I bought this Jump Starter in summer because I  knew I might have problems with my car during the winter time and it happened. I didn't use my car for couple of day's and my battery was dead and it was really cold outside. So I decided to jump start it. I connected the jump starter per all the instructions and it didn't help. Unfortunately I came to the conclusion after I googled some info that it's a waist of money. It won't start your car when you have dead battery. Fortunately I asked my neighbor to jump start me and he had a really powerful portable jump starter that started my car in seconds. And I don't have old car, it's from 2017. I just don't drove very often. You can still use it as a portable power bank to charge your phone and light and that's about it. To expensive for a power bank.


We shall see. I am no rookie to using a claybar on a vehicle. It is one of the best ways to remove contaminants. I have tried multiple towels and mits. No matter what, I come back to old school clay bars. They just work.However, I am excited to try this mit. If it works as advertised, it will drastically speed up a slow process. These mits always concern me because I don't understand how the vibe clean. I know you have the whole waffle design, but you can't find commitments in like with a clay bar.It does feel good on the hand. It's thick and feel like it will last. If I can get 5 or 6 uses I will feel satisfied.I'm giving it a 4 star Veal recommendation. The 5 stars for Amazon is to help raise it up the list. I cannot wait to try it this weekend. I will update the Amazon and Veal rating as necessary.Veal Recommendation Levels1. Not even to people I dislike2. To people I dislike3. People I can tolerate4. People that I like5. People that I love


It's perfect 🥰 Ok I was having tons of problems with my stereo system so ok I need more 🔋 power  so I did the research and tried this very expensive battery, 😅  but hay it did the job I was so impressed I just bought another one for the front the 1 I bought was put in the trunk ,, now I noticed I was having a small problem starting my car in the winter you can't even noticed the problem but im a mechanic so I know when I'm about to have issues so be for I have a bigger problem I'm changing the front battery. But yes these are the ones . But them I have a 6000 watt system and no problems these batteries work .


Compact, easy to use and nice carrying case. The BOOKOO jump starter is great to have in case of you need to give yourself a boost or help someone else out with dead battery. It’s easy to use. I have not had to use this particular one yet I do keep it in my boat in case my cranking battery dies or one goes bad. I feel confident this will boost when I need it to!I have multiple BOOKOO boosters and used one with less mah to completely jump my truck. I wanted to test it out so I unhooked my battery completely from my truck so it would be as if my battery were COMPLETELY dead and I hooked up the BOOKOO booster and it successfully started my 5.4 l pickup multiple times! I didn’t test how many times it could jump without having original battery even hooked up but I did at least three times and I know it had mor juice left. I was just happy with those results so I unhooked it and recharged it and put in in vehicle for use when needed. I now keep one in every vehicle we own.I’ve also jumped a 4 wheeler with the BOOKOO booster no problem.


Love it! My old knob had been slipping on my genuine leather Wheel Skins cover, even though I used the optional rubber strips. I replaced this cover with a wonderfully plush, inexpensive leather-like cover. The ad for the XL spinner urged me to measure before I ordered. Out of laziness, I did not, and I had to return the regular-size knob for an XL. Installation was a bit of a hassle because the supplied small L-shaped Allen wrench had to be used upside down and out of sight. I wished I had a tool like a screwdriver handle with an Allen wrench attached. I think I did the final tightening by attaching the Allen wrench to a vice grip. I am male, but I have never been as strong as some. I love the XL knob! It operates so smoothly, like a precision instrument with ball bearings. The large, flat head provides secure, excellent control. It does NOT slip, and I wouldn't hesitate to bet it never will. This product is the cat's pajamas!


I'm impressed ! Honestly I was a bit skeptical when I bought it but I am pleasantly surprised.  It feels very sturdy !  I like how you can rotate the brush head. The padded grip is pretty nice.  The main bar is metal, then there is a plastic brush head and a plastic that clips on each end with a sliding pin system. The plastic feels pretty heavy as well as main metal piece. The scraper head is nothing special but I think it will work just fine.  It's not looking like I'm going to get to use this ice a rapper this year as I ordered it late in the season but my old one just recently broke.  It didn't help that it took 3 weeks to get here but that's not the seller's fault. Amazon was the shipper so I had to wait a week before they even shipped it, then I'm not sure what the hold up was w the shipping company. At some point they passed it off to USPS.  I have no clue why.  Anyways I honestly was impressed when I put it together, it has a good comfortable, sturdy feel to it.  It's pretty cool for as far as I've scrapers go I guess lol


2012 RAM 2500 ST 6.7L  Transfer case switch perfect  replacement. I was stuck and put my truck 4low, and a service 4wd light came on. Once I was no longer stuck, I shifted it back to 2wd hi, and the dash said I was in 4 hi. So I wanted to see if it was in 4wd. I put my truck in my yard and stomped it, and of course, I was actually in 2wd. I placed it in 4wd and stomped it I was in 4w drive. My truck is a manual floor shift for the transfer case if that helps anybody, which means no electronic actuator to replace for 529.00, just a sensor (Dorman 600-555 ) for 83.00 at Autozone or 60.00 at amazon. I would purchase it again and I suggest going to Harbor freight tools for a 1-1/2-inch spanner wrench or the spanner wrench set for 65.00. the Spanner wrench would fit in the space much better than huge combo wrench. it took only 25 minutes to remove and install please use dielectric grease in the switch plug to keep water out.


Was really hopeful but my hope burnt out. I bought these for my truck cargo lights as well as my door lights.  When I first put them in I was amazed at how bright they were.  It was amazing and I was excited.  Then about 2 weeks after having them in I noticed one of the cargo lights started blinking.  I thought it might be the wiring in the truck but then shortly after I noticed the other light started doing the same thing.  I had my little daughter push on the brake to see about the brake light and it seemed to still be okay.  So I took 2 of the bulbs out of the doors and put it back in the cargo lights.  It was about 2 days later that both of those started to struggle as well.  Then I noticed the one in the brake light started to flicker as well.  I was so hopeful for these bulbs and am quite saddened that they stopped working so quickly.  I would understand it if was 1 bulb then it could be a fluke but I now have 6 bulbs total that aren't working any longer or flickering really bad.  Thankfully they weren't too expensive so it didn't hurt too bad when I threw them away.


I like it a lot. I had an old one I bought years ago that was smaller. This one is large enough to easily accept a paper shopping bag, and it’s a little taller than my old one, so if I have a bunch of plastic shopping bags, I can pile them up higher.  It’s pretty cool that I could fold it up if I needed the room for something else, but I never do that..  I don’t understand why some people complain that it slides around. The back of my SUV is plastic, and it doesn’t slide around (and I am not the most gentle driver either, but if I had to slam on my brakes, I would say all bets are off and I would not blame this product).  I’ve heard some of them fall apart, so I pulled on mine from different directions, and it’s not falling apart. I don’t doubt with automated manufacturing that some of them would be defective. (check them out before the return window closes)..


This battery delivers its rated capacity of 100Ah. I have a Bluetti AC200P connected to a 6 circuit manual transfer panel and this works well.  I was looking for some extra battery capacity and watched many reviews of the different brands of 100Ah LifePo4 batteries.  Power Queen was a highly rated battery and their price was equal to about all the others.  However, Power Queen was running a promotion where you would get a 12.8V 6Ah battery for free with each battery purchase so I took advantage of that.  I decided to go with 2 of the Power Queen 100Ah batteries.  I use the smaller battery in my electric start gas generator.  I was able to test their capacity to ensure that I was getting the advertised 100Ah from them and I am pleased to say that each one delivered about 101Ah.  I now have them wired together in series to get 24V and then attach them to the solar generator through an adapter.  This works well although the solar generator only charges at about 340W.  I can't speak for the life cycle of these batteries but with a 5 year warranty, I am not to concerned about that.  I did have the opportunity to ask a question via email to Power Queen and they responded within a day.  I think that they were a good value and would buy again.


A complete waste of time and money!! Do yourself a favor and look at other tankless rv units by OTHER manufacturers! The listing says that it will fit and opening but this is false! I originally purchased this to go in a travel trailer but it was entirely too small to fit in the opening. I never installed it but decided to hold on to it for my next RV. I recently purchased another RV and the existing water heater was shot so I got this unit out and placed it in the RV. The first time that I used it, it worked great!! I was pleased. The next morning when I tried to do dishes I kept getting an error code and the hot water would immediately shut down. When I very first turn the water on the sensor says that the water is 199 degrees so the unit thinks that the water is too hot. So, now I have to order and install a new temp sensor after using this unit 1 time! A ripoff. I can get no support or warranty repair because I purchased it 2 years ago even though it was kept in the box in new condition I have no support! A complete waste of time and $600.00.


Only oil I use. I am glad that I have been able to buy this oil from this same vendor for years. You just can't find it in stores and if you do it is almost twice as much per quart or higher in some places if you can even find it. This is the only oil I will use in my zero turn Skag. I have been using this oil in my mowers for 30 years. I always change oil, OEM Kawasaki oil filter and air filter before start of every mowing season. Have always been able to get many hours of mowing out of my mowers without a problem. Might have to add very little at the end of mowing season. As far as I am concerned this is the best oil to use in warm and hot climates being how I live in Texas and it gets very hot in the summer. I might add that this is a residential property and I mow 2 acres once a week and I mow an additional 5 acres three times a summer. If you mow commercially you will have to change oil and filter more often.


Looks and feels great. I thought I'd try these in my old, 2010 Prius after having replaced the original leather with  cheap vinyl seating elements. The vinyl was cheap but professionally installed. It looked ok, but did not wear well. So, I thought I'd give these a try.  Now, I wish I'd known about Karcle before I replaced the original leather.  I'm more than pleased with this product; I actually learned something from the experience.Because my Prius has heated seats, installation was a little more difficult. I went through contortions securing the elastic ties that go beneath the seat and hold the bottom element in place. But if your seats aren't heated and there aren't a lot of electronics under them, you won't have this problem. In any case, after a brief struggle, I got both pieces on. They look great and feel very comfortable.  The material--nappa leather--appears very durable. It's supposed to be washable. Time will tell, but right now, I'm in love with these.  I didn't need to replace the rear seating because nobody every sits there.Update:  after a few weeks driving, I've come to love these seat covers. They look great and feel better than the third rate vinyl that was professionally installed. No, they're not as tightly fit as they vinyl, but they look and feel a lot better.Update: After a few weeks of driving I like these seat covers even more than I did when I first put them on.


Does not fit well - too short. The quality is very nice, but it's not long enough to fit the key fob.  Because it's too short, I had a heck of a time putting the post on the end to keep the cover closed.  I finally got the pin through, but it's at such an angle that I cannot put the metal piece on the back end.  I had to leave the metal piece off and secure the pin with the key chain loop only.  It's a shame because it's a really nice cover.  I have a second one on order that I will end up returning because I suspect that the fit will be off as it is on the first one I received.UPDATE:  I ordered two of these, one of each color.  The review above is for the first one.  The second one was shipped from overseas.  After I received the second one, it turns out that the pin I mentioned above is much longer on the second one and it fits great.  If they had provided the correct pin on the first one, I wouldn't have had to alter it to get it to fit and I would have given them 5 stars.  Because I am stuck with one that has a short pin, I leave my original one star rating for all the time I put into it to make it work.  Apparently, you roll the dice when ordering these.


Nice to have on the road. I ordered this because I stay on the road and thought that it would be a good addition to my vehicle. I like the tray that sits up high so that when I’m driving and if I need to eat on a snack in between destinations I can. This extended cupholder makes it really convenient. It’s also convenient when I have multiple cups or bottles that I need to sit in the vehicle. So far it’s worked out pretty well. At first I didn’t know how to tighten it so that it would stay in the vehicle original cupholder but after looking at it for a few minutes, I saw that you actually turn the bottom which expands the sides to ensure a secured fit.  The only issue that I have is that the cupholders and tray seems a little difficult to turn. At first it got in the way of my gear shaft. If you’re not using the extended cup holder, it can seem a little bulky as far as room space . So at times I will take it down if I’m not going to use it in a reasonable time.


Great Product For Automobiles Or Any Filling Need! I used this product to repair a hole in the front bumper of my wife's car after an accident! I had a hole about 3 inches by 4 inches that was in need of repair. What I liked about this product was that I did not have to put a bunch of materials together or make a big batch for such a small job.I packed the hole with some newspaper; then I left about a half inch depth from the front of the bumper to fill. I took out about a cup of putty from the can with a plastic putty knife and then  added about a half inch line of hardener from the package.I then stirred the material until the colors blended well and applied it to the bumper. I did read where other users added too much hardener and it hardened on them rapidly; but I did not experience that problem with my batch. As a matter of fact, it took around an hour to dry completely which led me to believe I was a little too lenient on the hardener. It worked well though and I sanded it down within three hours and painted it the next day.You really can't tell that the hole was there at all; with the exception of paint difference. I strongly recommend this product for any of your patching needs!


I wonder about the quality. The connector should work ok for lighter duty applications.  I dont think I would use it on a car or truck.  The contact surface at the base of the black knob is nowhere near the contact surface of the battery post connector, although it is about the same as where you would connect the cable.  the connector is two parts with just a plastic bushing/insulator between the two parts.  I was able to move the two parts some, but did not try and seperate them, but I think I could if i used more pressure.  The square headed bolt is too small to self hold as it is designed to, or the ridge designed to hold the flat side of the bolt is to far away.  The square head will spin and not hold against the flat side as you can see in the pictures.  The unit does appear to be brass or at least a brass alloy.  I did file a small amout off one edge and got the same color underneath.  The cable connector end has a short area with threads but I tried the clamp bolt in there and it fit but was a really sloppy fit.  When I install the switch I will most likely drill out those threads and just clamp the battery cable eyelet with a bolt and nut.


White Light=Bright White. I have used several different Chemical Guys detailing products. Some I like better than others and this is one of them. I have a white metallic vehicle and I wanted to see if I could find a product that really makes the white “pop.” I tried a few different things and even though they looked good, I never got the “pop” I was seeking. Also, many of these other products are magnets for dust and even though I don’t drive anywhere near dirt roads or live in a particularly dusty area, my car would would coated with dust just days after I detailed it. I did not find that issue with White Light. In fact, it hasn’t rained in a week since I detailed my vehicle and it doesn’t have much dust sitting on it at all. The white is bright and crisp and has a deep shine. I will definitely continue to use Chemical Guys White Light for my white vehicle.


Better than the Toyota factory links. My elderly Toyota had a rattle that I had a lot of trouble pinning down.  It would happen as I went over some bumps but not others.  It would act up so intermittently that I couldn't figure it out.  After a lot of driving around and head-scratching I finally narrowed it down to a worn out front sway bar link on the passenger side.The factory Toyota links are non-greasable.  Mine lasted almost 200k miles which is certainly a good track record, but when it came time to replace them one of the reasons I chose the Moog parts is because I can grease them.Yeah, I know suspension grease nipples have gone the way of vent windows and manual door locks.  Modern suspension components are Lubed For Life (yeah right) and last a long time.  Except when they don't.  Besides, I don't mind hitting a dozen fittings with the grease gun once every few months.So I bought the Moog links, installed them, and pumped them full of grease.  It's been a few years and almost 100k miles and the Moogs are still going strong.  I think I've lubed them twice in all that time (so much for those grease fittings) but they're as quiet and slop-free as they ever were.If I ever manage to wear out the links again, I'll buy another set of Moogs.


Comparable to other standard wipers but is definitely not premium. I was fortunate in the fact that I got to utilize the wipers in the rain and slush right away on a 10 hour drive across state (California 2/24/2023) and it happened to rain 9 out of those 10 hours too. The wipers I would say were very quiet and I did not hear any noise from them what so ever, however they do bend a bit at the top tip when moving across the windshield which makes me question its longevity in terms of quality. The wipers were also labeled as premium and they are definitely not. I did get steaks on one of the wipers as it moved back into the down position and it did it every time throughout my drive but while going back up, it cleared it. For the price, I would say its worth buying and should last through the season I hope. Would I buy them again?... I most likely would not. On a side note, I did buy three sets for all my cars and none of them came labeled with the sizing so I had to measure the lengths to determine which was for which vehicle.


!! So I get my pkg, in record time, & I open th box & I see this very nice, square, “suitcase” like thing..I’m thinkin this is not wat I ordered is it?  It’s suppose to be bigger?  But I’m so impressed at how nice th “suitcase” is that I’m willing to settle for this instead of wat I thought I ordered..great material & has a handle, really super nice..so I open it up to look inside & there is th product I ordered!  All folded up in this case!  Now I’m really impressed!This is really nice, I’m surprised at how very nice it is..I’ve yet to use it on my car yet bcuz I just got it but I hav no doubt this is everything I ordered plus more..I’m sure I will be most happy w it..a very nice email from th Seller as well, letting me kno he’s there should I need anything at all & is willing to be of help in any way possible..wouldn’t it be most wonderful if all products we order came this way?Yes I’m very pleased w my order & I highly recommend this Seller..🤗


All I can say is "WOW"!!! I was skeptical of this type of product and its claims of moving dust/dirt out of my car's interior versus a standard blowgun. I always thought it was the same PSI getting to the gun, how can it possibly be better? I finally broke down and bought this version as it was cheaper than the recommended one I see in all the car detailing groups. I hooked it up the day I got it and did a side-by-side comparison with my metal blowgun. My standard blowgun blew up a little dust on the floorboard of my wife's Jeep for the first test, and then after I attached the Vortex and went to it, it was literally a dust storm. I had to move away from the vehicle to get fresh air. I am literally blown away by this product and time will tell for the longevity of the product.I highly recommend this to anyone looking to up their car interior cleaning game. I will be bragging about this to my friends & family, it truly is a great product, and I would buy it again if ever needed.


Two pieces! Can use both at same time or just lumbar, just seat. I took a 4587 mile road trip a few months ago for ministry. Oh how I wish I had this then! The one I had slipped and slid every time I got in and out of the car and—  lost it’s cushioning. Sore bottom!  I love the fact that I can choose to use just the seat or just the lumbar or both at the same time. Very comfortable. VERY comfortable!  I have a lumbar seat in my CRV but this gives even more solid support. My biggest problem has been my seat after several hours of long distance driving. This seat is WONDERFUL!  It doesn’t slide around when you get in and out of the car due to several details. The raised pimples on the bottom with a material that doesn’t slide. Also the space separation for each leg. Each one has an elastic strap that can be clipped around the seat. I took a 3 hour, (6 hours round trip)  the day I received this. No pain. No fatigue. No slipping and sliding. I absolutely feel much less fatigued with this support. I love this!!!  Needed it years ago!  Glad to finally have it now. Highly recommend.


This comes in real handy even if you think it won't. These oil 'suckers' have been around for a while but I never thought I would use one. Let me tell you I was wrong. I wanted to do something simple as a test so I changed the oil in one of my mowers. I removed the dipstick and inserted the larger tube and pumped a few times (maybe 5-6) and the oil began flowing out.  I pumped a few more times and within 3-5 minutes I had removed all the oil from the crankcase. There was no mess. The spherical accumulator showed the exact amount I removed and I replaced that amount into my mower. Very easy deal.I will note that many new zero turn mowers are sold with 'lifetime' filled transaxles and I had been putting off purchasing one because of this. Now that I have this extractor pump I know I can change the fluid and prolong the life of the transmission. Fluid changes can be very cumbersome for a unit that was never meant to have the fluid changed but this extractor will make it easy.I wish there was storage for the tubes and the extra caps that come with the unit. Also, you need to be careful to keep the rubber isolator straight (unbent) between the tube and the tank or you may lose vacuum while pumping.Overall, this is a good deal on a very useful tool.


Fit well and actually work! When buying these I was a bit skeptical because they were so much cheaper than pants from an actual motorcycle store. However, I got a jacket from a store and was trying to save money so I decided to purchase these pants. Unfortunately I got into a motorcycle accident a couple weeks ago; however, I found out the pants actually work!! There was rain on the road, I had to make a sudden stop, my bike lost traction, slid on its side, and threw me off once it hit a car. I must have slid 15ft on the asphalt, got up and was completely fine besides a few impact bruises. On top of me being fine, the pants are also fine, no rips or tears. I will continue to wear them once I fix my bike. After this experience I had to write a review because I did not see any that mentioned wearing them in a accident.A few reviews mentioned upgrading the padding inside, which I could definitely see and probably would have helped with the impact bruises. But overall these pants are WELL worth the price and I would highly recommend. Saved me from some really bad injuries!Will try to upload pictures when my phone is fixed.


I would buy it again if needed. I couldn’t find the spring isolators for a decent price so I bought this kit. I figured if the springs were junk like everyone said I would still be money ahead buying this kit and a set of springs. Great news, the kit was great. Springs are a good ride height and everything went in easy. I don’t know why this product had such mixed reviews. Install took about 2 hours with good tools. Extending the axle enough to put the new spring in was expectedly tough because I couldn’t find my spring compressor but I was able to use a small bottle Jack to get the axle separation I needed. If I buy another sequoia I will buy this air spring delete instead of working on the air suspension every 6 months.


Make the clay bar process much easier. So when I picked up my car from an overnight stay at the service center, I was beyond livid.  Some ‘genus’ left my pristine black car parked by their sprinklers and it left horrible water spots.  After the tried to wash them off with no success, I took it home expecting a long tedious day of detailing to try to get my paint back to normal.  While I know that using a clay bar does not usually remove water spots, I decided to try these clay mitts anyway because nothing else was really working.  I made sure to keep the area of the paint and the clay mitt well lubricated with the aerocosmetics wash/wax spray I use.  I used no pressure because Tesla black paint scratches extremely easily.  After two times, the spots were almost gone - even the deep ones.  I then used a polish to make sure I had not swirl marks and now my car looks even better than it did before.  The process took a fraction of the time I expected to spend.  The quality of the Ragnify Clay Mitts are really good and saved my paint.


everything is just wrong. I went to install it and took all the parts I needed off and out of the way then  I put one of the brackets on with ease thanks to a friend. but shortly afterward noticed an issue with the second bracket. the one that attaches to the transfer case bolts wasn't fitting right. I went and read that some needed to cut their brackets to get it to fit, instead of cutting the bracket I cut the bit off that was in the way with a Dremel and it fits perfectly afterward. then I went on to try to put the shifter in and attach it to the 4WD lever and I tried for nearly an hour and it wouldn't work. I went to look up if I was doing something wrong but I found out I was given the wrong bracket altogether. so I spent half my afternoon taking my car apart and now I need to go to B&M for customer support and hope they can help fix the mistake.


Not a clear wipe. I guess I am old, but I remember replacing wiper blades quickly and easily. I have a 2014 Pathfinder and somehow the driver wiper (26") cracked. Still worked fine, but I noticed a slight scratch in the glass. I had a 17" replacement for the passenger side a few weeks ago. I thought I bought the same. Duh. That one is great(Rain-X 5079283-2 Latitude 2-IN-1 Water Repellency Wiper Blade, 17") put on by mech at last oil change. This one hat two other adapters, and I finally removed the one on it as I had the old hook style. Slid on easily, but the cover at the end would not snap shut. I redid it three times. Anywho. at the center of the blade under the connection there is water that is not cleared, and when it hits the water on the right ( next to the rear view mirror) pushed by the passenger blade it hardly wipes it. I am about ready to reorder another like the 17" and keep this for emergencies.


I was skeptical at first but thought I would give it a try.  BOY, AM I GLAD I DID!!! I wanted a way to get a better view of the back seat of my car. I was skeptical at first but thought I would give this mirror a try. I was amazed at the end result. I was so easy to install and once attached, it stays completely in place as if it were factory equipment. And not only do I get a full view of the rear seat of my car, because of the extra wings on the mirror, I can actually see out the rear passenger windows without ever turning my head. Amazing. One of the best accessories I have ever purchased for my car and at a terrific value.


This worked so good!!! I just bought a new to me 2020 Charger. When I first got it, I could see water spots, so I went and washed it, got it all nice and wiped down and still water spots on all the windows...ugh! So, then I got my windows tinted and the water spots really showed up after that...it was horrible. so, I found this and I wish you could see but my camera just couldnt get the pic I wanted...it got rid of all my water spots, like awesome! I worked in small sections, wiped side to side with a microfiber cloth for about a minute, I used, their speed wash to neutralize it, when I was done with a whole window, I wiped it down again with glass cleaner. Dont forget to roll your window down slightly to get the top. But this stuff worked wonderfully!!!!


Best price to features for this type of product. I looked at others similar to this, Hart, Dewalt, Milwaukee, Bauer, etc.  I liked the Hart and this one because I have batteries for both of these.  The Hart was near 2x the cost, so I took a chance on the Meliff.  Two days after I ordered this, I found a Hart tool marked down due to a damage box - funny but it was actually cheaper.  I got this one in first, it worked well.  Quick to inflate, I liked the auto shut off feature.  Then I got the Hart in.  I tried the Hart out and it works well but has no cut off feature.  You have to hold the trigger the entire time.  Both are equal in speed and battery life.  Both weigh about the same and seem equal in construction.  The Hart is a little prettier in cosmetics.  End of the day, I prefer the Mellif and will be ordering another (they've jacked the price up 12% in past two weeks).


I have owned this now for just over 3 years. So, I kind of forgot where I bought this. I was going through my "buy it again" list to try to remember what something I bought was called, and discovered I bought this on February 23rd 2020.Now, due to the pandemic, I actually spent a lot of time both on the road in both truck and motorcycle. In that time I've used this countless times for both air variation at elevation and temperature due to changing of seasons as well as being high in the mountains. I also use it nearly 3 times a week simply to check my motorcycle tire pressure.I've also used this for various reasons like getting myself or others off the highway, mounting new tires on any of the 3 motorcycles I use and even for limping 200 miles down the highway on my Africa Twin until I got to a shop with the correct sized tire for my bike.Shockingly, this cheap feeling and clunky mess of a product never once let me down, nor did it ever give an inaccurate reading on the pressure I have selected.Honestly, I've recommended this to multiple other riders as well as bought them for several friends and family members, all who have had zero problems with them.10/10 would spend $60 again.


Perfect fit for SRX 2012 13582688...Why I remember this number? Because this was the BCM number in my SRX, and I had a hard time finding it new. That was also before I learned EEPROM...anyways. I saw this one, and it was reasonable, I tried to google to see if it will work, no clear answer. I finally contacted Cadillac and they told me yes it fits, then I purchased it. I did have hard time to get the car start even after programming the part, then I copied the EEPROM from my old BCM, wrote that in the chip, it showed "EEPROM PROGRAM INCORRECT". So what to do? I just ran SPS2 and reprogrammed the BCM again, then everything worked. Car started fine, most of the error message is gone on the dash. That was great! Then I purchased ALLDATA subscription, and under the BCM replacement, it showed this one as the only one fit for my car. So happy!


Bring the water bottle! Due to a surgery I had, I'm extremely prone to dehydration, so I carry a water bottle with me everywhere I go. My favorite is my Owala Free Sip 32oz. I drive a 2020 Toyota Highlander, and the bottle doesn't fit in the cup holders. So, I've been driving with my bottle between my legs, which makes things awkward and less safe. When I found this cup holder, I was excited about finally having a solution for the car. Tip...be sure to check the size of your cup holder before ordering to be sure you get the right size. I got the large one, and it adjusted perfectly in my console without having to offset. It is big and makes the cup holder the focus of the center console. My husband hates it and told me I just need to use a smaller cup. But when you have to drink as often as I do, that's not a good option. I love this thing, and I love that it's made it safer for me to take care of myself while driving. It's easy to insert and doesn't scratch the existing cup holder or console. Great for me!


Engine power is reduced? This can be your fix. Ok, another Cadillac story, it has been showing "engine power is reduced" for as long as I got the car as a gift. I don't mind to work on it, and for 2 months I learned a lot. I programmed all the modules that I replaced, still, engine power is reduced...So the last two things I was going to do was to change the fuel, then change the accelerator pedal, since I already changed the throttle body, the accelerator pedal was one big thing on the DTC report. My friends thought I was wasting my money, since how the Accelerator pedal can cause that? Well, that part was under water...so...why not? I took my old pedal out, to my surprise it was really easy to get it out, basically just one screw! Then I opened it, it had some corrosion on it, I tried to clean the chip with contact cleaner and wire brushes, didn't work. So I waited till next day this delivered, replaced it. Turn on the car, the "engine power is reduced" message is gone!! I ran GDS and it didn't show any DTC code, so this was a successful fix!


Might work for others, but not for me. I am an older lady.  I have a small, older car.  It will probably be the last car I own, too.  So I wanted to try to protect the seats.  The problem is, I didn't think about how I get into my car.  Because it is a small car and I am older, I open the driver's door, turn away from the driver's seat and then lower myself onto the seat.  THEN I both turn and pull my legs into the car.  Because of how I pivot by turning and pulling my legs in, these lay-on-top covers just get all twisted beneath me!  You really think I want to try to lean up in the seat and fiddle with this tangled/twisted seat cover beneath me???  SMH...for this price these should be way better than they are.


Not a lot of head pressure. I use this to pump diesel out of canisters into my car. I was hoping that I would be able to place the canisters on the ground and simply pump into the car, which is not very far up. I have been using a siphon, and I wanted a setup that was a little cleaner. To make sure that I had maximum power coming from D cell batteries, I also ordered a set of rechargeable lithium d cells to go with this. The pump does work, but don't have any high expectations for flow rates. If I have the container on the ground and I am filling to a fuel cap near my waist, the flow rate at max is barely more than a trickle. However, lifting the source canister up two or three feet brought the flow to a satisfactory level. Ultimately, I decided to place the canisters on the roof of the car, as I had done with the siphon. That works very well but if the pump falls out of the canister, it can be a bit messy, which is what I was trying to avoid. It is a very slick product, but needs a larger pump or more power.


Initial thoughts are good. I went from a hard folding cover to this one due to the weight of taking the cover on and off. I just always kept the hard cover on but I bought an ATV that will be riding in the bed of the truck. I like having something over the bed when driving around. I've never had a soft cover before, but that was the only option to get away from the weight. I went with this one as I needed the bed rails free for a removable rack I use with the tonneau. This one sits nice and flush. The only reason I took a star is the cover is completely flat, it has some ripples in it that run the length of the bed. I'm thinking this will probably settle, but for now I'm taking a star. The only other slight issue is the front clips are harder to snap in place than I expected. Again, I think this will probably resolve once it's been installed a while.Update: Had to return it. Maybe it's the tailgate mat I have installed or the way it fits on the rails, but the tailgate hits on the rail and makes it really hard to close. I have the rail all the way forward and it's still hitting on the drivers side. I can close it, but it's much harder.


Great for the price. I found myself DIYing a new stereo install in a 2015 Miata.  The Mazda engineers seem to have intentionally made everything difficult to get to, or super tight to work around for anyone with big hands.  I ordered this because I don't forsee myself doing much of this sort of thing, so I didn't want to invest in a "I do this for a living" quality product.The plastic is kind of soft, so I don't imagine these would manage to survive much more than a dozen or so cars worth of stereo installs, but for the money it sure as heck beats the more durable options.I didn't even realize it comes with valve stem caps when I ordered it.  That seems like an odd inclusion, but I suppose if I ever need to fill up with air at the gas station and manage to forget to put the cap back on, at least I have spares (enough to derp every wheel twice!)If you're looking for something quick and dirty to accomplish a task, and not looking for something to earn a living with, these are just fine (and heck, for all I know the more expensive ones are just as durable, and I owe these guys an apology)


Does not work... never did. Bought in 2020 didnt use it right away, just wanted to have it on hand when I needed it. When I finally needed it would not turn on... and it has never worked!Ive tried it on a 2006 pontiac G6, 2002 GMC Yukon, and a 2009 Jeep wrangler. It never turned on. I thought it was just me using it wrong. Then I lost it in some boxes. Found it three months ago and tried it in the jeep. It wouldnt turn on.03/11/23 I thought Id try it again in a 2002 GMC sierra... it didnt turn on. Tried it on a buddies s10 and it came on but wouldnt connect.Updated 03/19/23 I went back to the 2002 GMC sierra and started checking fuses. Found 2 blown fuses (cigarrete & DRL) and replaced. Reconnected scanner tool. It comes on but wont connect. Retried multiple times... same results. Next I guess is the drag test... where you use a paper clip to test each pin hole on the vehicles scanner port under the dash.After reading some other peoples reviews of this unit, I thought I should add my review to the list. No pins are broken, none are bent, and plug was pushed all the way in.If I could return it I would its really been no help so far, and a waste of money...


Nice Fit and Look but Having to Replace the Washer Nozzle with OEM Disappointing. I really liked the look of this and it was a perfect replacement. I ordered the black version to accent my Black Jeep which I was really glad I did for the look!However there is where my problems came and why I only gave 3 stars. It comes with a paper saying to replace the Washer Nozzle that comes with it with the old OEM version from the one you are removing.YOU MUST DO THIS because The Nozzle that comes with it is terrible and basically squirts a stream of water down the back instead of spraying it. I found this out the hard way.First, because I ordered the Black version it would look real goofy with the Red nozzle on it. That’s why I ignored the manufacturers direction. So I had to mask off and paint my old red nozzle to match black.Second, because the original OEM nozzle was old the plastic was brittle and one of the securing clips molded into it was broken in the process. You cannot buy just the nozzle and have to buy the whole light assembly so I had to do some engineering to make it work.The manufacturer needs to fix this functional nozzle issue and not make Customers have to hassle with this. If it weren’t for this I would have given it 5 stars!


As flimsy as paper. I was looking to replace a wonderful bass clef magnet I'd had on my car for many years. I liked the romantic look of this treble/bass clef design, and was excited to get it. It arrived in a regular envelope, and I had no idea what was in it. I almost didn't open it, because the return address was not familiar. When I did open it, the magnet slid out like a piece of card stock paper, and the 2 "dots" that rest on the outer edge of the bass clef were 2 loose little black circles --- not in any way what I expected, and I certainly can't put it on my car. The first rain would wash them off. The extension at the bottom of the treble clef is flimsy & weak. I don't really know what I can do with it. I put it on my refrigerator, because I can't use it for what it was intended, and it won't stick to anything else.


I modified it. So I decided to do this a little different. I like to keep sanitizing wipes and tissues in my car. But I did not want to have them right in the cupholder beside me. So I put this together but I did not put the tray on top. I put the tray off to the side and I use the extra cups to hold my wipes and my tissues on my passenger seat. And I am very happy with it because they are easy to grab while I am driving. I always used to have to just try to fumble around for the tissues.


Great pants but order the right size. I really like these leather pants.  It’s hard to find leather pants in a store unless you go to a motorcycle store, but those pants are more about protection in case of a fall or crash.  The other place to find leather pants is at a kink store but those pants are very expensive.  I decided to order online, but when I read the reviews they all said to size down.  I followed their advice, and it was wrong!  I normally wear a size 36 in Levi’s, so I ordered down like everyone said and ordered a 34.  That pants was too small and too tight.  I then thought maybe I should order a size bigger so I ordered a 38, and that pants was too big.  Finally I ordered a 36, and it was perfect.  My advice is order your normal Levi size, and you should be good to go.  Just so you know I weigh 220 and I’m 6-1 who wears size 36 in pants.  Hope this helps someone out there.


Not really that bright. I got these for my 2002 F350 SuperDuty.  I installed them and was excited as I was replacing my old incandescent bulbs that seemed very dim and yellow.  I read the description and was looking forward to the bright new fog lamps.  I put them in and waited for nighttime to come.  As I was driving I turned them on waiting for the great reveal and I didn't even know they were on.  I actually at first thought that they didn't come on at all.  I actually waited to pull behind a car where I could see the reflection and saw they were indeed on.  Unfortunately it really doesn't make a different.  I'll leave them in for now though they really seem more like driving lights than fog lights to help see the road.  I won't buy these again.


There are 2 white wires. This is going to take some playing to determine which is the hot and which is the neutral. I have never seen any light fixtures with all wires being the same color.The light is pretty enough to look at. It's  a light for an RV, how pretty does it need to be? I bought it to provide light in a space with no windows.Having to wire one way and hope it works, then possibly have to switch the wires to make it work is stupid. A little tape or marker on the hot or neutral can not cost that much.Further, there are no instructions,  nada, zip, zilch. It's a good thing I just replaced 5 other lights in the RV or this would be going back. I'll have to mark a wire so I know which way I had it if it doesn't work the first way I try it.Also, there are 8 holes in the light for screws, but only 4 screws provided. They should be enough, but why put in 8 holes if you only need 4 screws?The light is led, so energy efficiency should be good. I don't pay for electric where I currently am, so I don't know how much savings there will be. I may update after I get this thing up.


THE MEASUREMENTS/SIZE GIVEN ARE NOT CORRECT but a nice cover for the price. I purchase alot of car covers.  I usually purchase Budge because they are economical for what I need them for.  This review is not against the seller but the mfg.  I followed directions and measure this car from front to back, I also went online to confirm the length....204" or 17'.  I ordered 2 covers that the mfg states are 228' or 19" for extra caveats to the car itself.  Mind you I know this is a universal fit, the fit overall for a sedan is fine, however, this cover is not 19' long so I am very disappointed.  I cannot return because it was such a tight fit a small corner ripped.  I also used this cover on another car of same dimensions, it did not fit.  This is a lightweight cover which I knew that is fine.  Not happy spending $64+ dollars for something that didn't cover 100%.  Again, not made at the seller, just the mfg and to let people know that Budge misrepresents the measurements.  This is the first time this has happened to me on their covers.


So far, so good. I received this yesterday, so I cannot speak to its long-term reliability.  However, I would like to make a few points.  It is smaller than described. About 4 inches wide instead of the 6.3 inches in the description, which fits nicely on my dash.  I chose the "warm light" color.  Gold really, and this fits well with my other dash lights.  The more popular green would have looked much more like an added, non-factory accessory.  It started working right out of the box; however, I did charge it further before installing.  It took about two hours.  Yes, the instructions are poorly translated  from the Chinese.  As with many other consumers, I wish that the Chinese manufacturers would simply find a native English speaker to write their instruction manuals.  Too proud, I suspect.  In any event, If you have trouble with the directions find a 14 year-old to do it for you.  I'm 72 and I managed.  I set it so that only the time shows.  I would have included the temperature, but it will only show that in Celsius.  I don't need the date and year, so I passed on that, too.  My car does have a factory clock, but it is small and poorly placed.  This does the job.  I'll post a follow up in a year or so if I have any further comments or problems.  If you don't see a follow-up then so far, so good.


Wanted to like these but it doesnt work for my Jeep. I was so excited when I saw these because I was very ready for a different look for my TJ's tail lights and I liked the sort of modern look these gave. Unfortunately these don't work with my TJ because I have Rugged Ridge's heavy duty hinge kit for my tailgate and the tail lights are shorter in depth than the stock lights. I thought about cutting a 1/2 inch thick rubber sheet to shape but that also didnt work because the bolts didnt end up being long enough to also reach through the body with it. When I did test fit them though, they were bright and worked like they should so that's why I gave them 3 stars. I really liked them but I just wish they were similar to stock in depth so I could have used them.


No complaints with quality. I got this for an emergency pull rope / strap for the trunk of my car.. 4" did not really register as to how wide that actually is, or how thick this strap actually is, until I got it in.. One of those (brain fartt) moments where you could kick yourself in after thought.. In any case, this is way more then I need for an emergency strap, so I am going to look for another.. I have one that is thinner and not as wide in my one vehicle, and I wanted one for my other vehicle.. If you want one for something like that, this is going to be much thicker and heavier then most people will ever use..With that being said, the testing I did do with it, it worked fine.. But let me be honest when I say.. 16,000 pounds is like towing a semi.. I have nothing that will use or need that kind of a heavy duty strap to tow.. But then again, I have seen smaller one break trying to pull out bushes and stuff.. So better too heavy then not heavy enough and breaking.. Just know, if you are looking for compact, this is not for you.. But from what I can tell so far, it is nicely made and I have no complaints about its quality.


Love this play mat. I got this play mat for the kids playroom and was pleasantly surprised. This was a perfect addition to our playroom since we have hard wood floors. Sitting on the ground was not comfy for me when I was playing with the kids but it was also a safety concern for me not having padding on the ground for my daughter who was doing tummy time, rolling and crawling. The mat is very sturdy / durable which is 100% necessary when you’re working with toddlers. I wasn’t sure if would last long but for the price I was willing to give it a shot. I was not disappointed. I wish I had it when I had my first child. I love the material because I would let the baby just lay freely so if she went potty it was an easy clean up. Even in general I was able to clean / sanitize the mat when necessary! Great buy.


SMELLS SO BAD, that’s the only flaw. I bought this car seat because after getting in an accident, I realized I wanted the most safe infant car seat I could find, rather than my previous cheap one with very little padding, that easily pops out of the base. So I got this MaxiCosi after talking with several friends about their favorite brands, and I love everything about it EXCEPT the smell, oh my gosh it is so strong smelling of chemicals, almost a burning plastic type smell, and it makes my baby and her clothes stink so much I bathe her and wash the clothes first thing when we get home. I’m grateful for the extra padding, and that it’s still in a great price range (on the higher end though), but please be aware even after washing & then soaking the car seat fabric parts in borax, it will still be overwhelmingly strong. I also used my Bissell fabric cleaning machine and it still smells… just an FYI, maybe not all of them are like that and I got a defective one, I’m not sure, but if I didn’t absolutely need to have a good car seat in my car right now, I would return it.


Great for a toddler. I needed a 2 pack so she can have 1 by toilet and 1 by the sink (she being my 3 year old toddler). For reference, I already own a similar stool by IKEA and it's basically the same stool. I do not have an IKEA locally so would have to pay to ship it, since I didn't have anything else I needed from them I chose to just buy this set on Amazon instead this time. It's exactly what I wanted and I liked that I could get white with gray instead of having to get the white with green, which is IKEA's only color option. If you did purhcase this set in the white with green it'd probably be just like the IKEA stools. I would never use this for an adult but I see in the reviews some people are. This is pretty flimsy and really is meant more for like a 20-40 pound toddler not for an adult or anyone over 90 lbs. That's pretty risky, imo.


I love the thickness and double sided design of this bib. I really like this bib. In our household we go through bibs and always have a pile on hand as backups. My little one uses bibs as his lovey and comfort. I've gotten numerous bibs on here but this is definitely one of the thickest, if not the thickest bib I've gotten. I (and my toddler) prefers thicker bibs over the super thin ones. This one feels even slightly thicker than the bibs I usually get, which is the type with the fleece underside. I do love that the design is on both sides, but of course it is going to cost more. I only wish this was slightly a bit more affordably priced, but I also understand this is better quality (thickness, double sided design, etc) than most bibs, which is why it is priced at this amount. This is great for heavy droolers, especially if your little one is at the height of teething and drooling non stop. I still recommend it even if your little one is not a heavy drooler. I got this yellow safari animal design and the color is beautiful and vivid. I noticed there are also other designs available, and they are all equally adorable and have vivid colors. Overall I am very happy with this bib and highly recommend it if you can splurge a little.


Love these so much!! Let me start off that I haven't used the decals. My walls are textured, so I already know they probably wouldn't stick. The shelves look great even without the decals though so I'm not worried about it. I know they were for a nursery, but I didn't need them in my son's room. So I put them in my bathroom behind my sink area to hold my lotions and perfumes. I love that they have the bar infront to hold things in, easy to clean, the perfect size for what I needed them for, and SOMEWHAT easy to put together. The only reason I gave it a 4 instead of a 5, is the reason why I said somewhat easy to put together. I had one end piece that the holes were not done correctly for the bar piece. So could only use one dowel to hold it in place instead of two. Which shouldn't effect it at all, but you expect something to come in with no defects at all. With that being said, I would get these again in a heartbeat and highly recommend them.


I didn't think I'd like this as much as I do! We bought this for my daughter when she was a little under 7 months and I have to admit, I love using it and she loves being in it. We actually seatbelt her into the cushion which gives her some more stability which allows here to reach for the toys I have attached easily without losing her balance since she isn't perfect at sitting yet. I have a Samsung S21 Note and it fits perfectly fine in the phone pocket and I can still use the touch screen while it is in there. I usually put on a YouTube video of nursery rhymes and she loves to have it going while looking around. The pouch it folds into works perfectly for me to throw my keys, hand sanitizer, toy wipes and wallet into since she is where I used to put my purse. Then when. You're done it literally just folds up and goes right back into the pouch. I don't even take the toys off! I have put this all together while holding her myself too when I shopped just her and me. I would definitely recommend. I got the pink elephant one and it is super cute.